Difference between revisions of "BORA SOM/BORA Evaluation Kit/Interfaces and Connectors/Ethernet1"
(No difference)
| |
Latest revision as of 13:46, 8 January 2024
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2021/10/28 | New documentation layout | ||
Contents
Ethernet port #1 (ETH1) - J9[edit | edit source]
J9 is a RJ45 Gigabit Ethernet connector - incorporating magnetics - connected to Micrel KSZ9031 PHY (Gigabit Ethernet Transceiver). This, in turn, is connected to PL's bank 34 via RGMII interface. This is an example of EMIO routing showing how to route PS's MAC signals via PL subsystem. Please note that, in case PL is not properly configured, this second Ethernet port will not work.
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | ETH1_TXRX0_P | - | - |
| 2 | ETH1_TXRX0_M | - | - |
| 3 | ETH_TXRX1_P | - | - |
| 4 | ETH1_TXRX2_P | - | - |
| 5 | ETH1_TXRX2_M | - | - |
| 6 | ETH1_TXRX1_M | - | - |
| 7 | ETH1_TXRX3_P | - | - |
| 8 | ETH1_TXRX3_M | - | - |
| 9 | 3.3V_ETH1 | - | - |
| 10 | GND_ETH1 | - | - |
| 11, 13 | +3.3V | - | - |
| 12 | 3.3V_ETH1_LED1 | - | - |
| 14 | 3.3V_ETH1_LED2 | - | - |
