Bureaucrats, dave_user, Administrators
4,650
edits
Changes
no edit summary
{{Applies To Bora}}
{{InfoBoxBottom}}
{{ImportantMessage|text=For BELK 3.0.2 or older, the boot process was based on the FSBL+second-stage bootloader (U-Boot) combination. From BELK 4.0.0 on, the boot process is based on the first-stage bootloader (U-Boot SPL)+second-stage bootloader (U-Boot) combination.
}}
==Introduction==
Bora Embedded Linux Kit (BELK for short) provides all the necessary components required to set up the developing environment for:
* configuring the system (PS and PL) at hardware level* build building the first-stage bootloader :** FSBL for '''BELK <= 3.0.2''' and '''BXELK <= 1.0.1'''or older** U-boot SPL '''for BELK-4.0.0''' and '''BXELK-2.0.0'''or newer* building the second -stage bootloader (U-Boot)
* building and running Linux operating system on Bora-based systems
* building Linux applications that will run on the target.
'''DAVE Embedded Systems''' provides all the customization required (in particular at bootloader and Linux kernel levels) to enable customers to use the standard Zynq-7000 development tools for building all the firmware/software components that will run on the target system.
==Kit content==
