Replaced content with "{{InfoBoxTop}} {{Applies To BoraX}} {{InfoBoxBottom}} == Power Supply Unit (PSU) and recommended power-up sequence =="
{{InfoBoxBottom}}
==Introduction==
This chapter contains the pinout description of the BORA Xpress module, grouped in six tables (two – odd and even pins – for each connector) that report the pin mapping of the three 140-pin BORA Xpress connectors.
Each row in the pinout tables contains the following information:
* Pin: reference to the connector pin* Pin Name: pin (signal) name on the BORA Xpress connectors* Internal connections: connections to the BORA Xpress components** CPU.<x> : pin connected to CPU (processing system) pad named <x>** FPGA.<x>: pin connected to FPGA (programmable logic) pad named <x>** CAN.<x> : pin connected to the CAN transceiver** LAN.<x> : pin connected to the LAN PHY** USB.<x> : pin connected to the USB transceiver** NAND.<x>: pin connected to the flash NAND** NOR.<x>: pin connected to the flash NOR** SV.<x>: pin connected to voltage supervisor** MTR: pin connected to voltage monitors* Ball/pin #: Component ball/pin number connected to signal* Supply Group: Power Supply Group* Type: pin type** I = Input** O = Output** D = Differential** Z = High impedance** S = Power supply voltage** G = Ground** A = Analog signal* Voltage: I/O voltage levels==J1 odd pins (1 to 139)====J1 even pins (2 to 140)====J2 odd pins (1 to 139)====J2 even pins (2 to 140)====J3 odd pins (1 to 139)====J3 even pins Supply Unit (2 to 140PSU)and recommended power-up sequence ==
