devwiki_user
145
edits
Changes
Created page with "{{InfoBoxTop}} {{Applies To BoraX}} {{InfoBoxBottom}} ==Introduction== This chapter contains the pinout description of the BORA Xpress module, grouped in six tables (two –..."
{{InfoBoxTop}}
{{Applies To BoraX}}
{{InfoBoxBottom}}
==Introduction==
This chapter contains the pinout description of the BORA Xpress module, grouped in six tables (two – odd and even pins – for each connector) that report the pin mapping of the three 140-pin BORA Xpress connectors.
Each row in the pinout tables contains the following information:
* Pin: reference to the connector pin
* Pin Name: pin (signal) name on the BORA Xpress connectors
* Internal connections: connections to the BORA Xpress components
** CPU.<x> : pin connected to CPU (processing system) pad named <x>
** FPGA.<x>: pin connected to FPGA (programmable logic) pad named <x>
** CAN.<x> : pin connected to the CAN transceiver
** LAN.<x> : pin connected to the LAN PHY
** USB.<x> : pin connected to the USB transceiver
** NAND.<x>: pin connected to the flash NAND
** NOR.<x>: pin connected to the flash NOR
** SV.<x>: pin connected to voltage supervisor
** MTR: pin connected to voltage monitors
* Ball/pin #: Component ball/pin number connected to signal
* Supply Group: Power Supply Group
* Type: pin type
** I = Input
** O = Output
** D = Differential
** Z = High impedance
** S = Power supply voltage
** G = Ground
** A = Analog signal
* Voltage: I/O voltage levels
==J1 odd pins (1 to 139)==
==J1 even pins (2 to 140)==
==J2 odd pins (1 to 139)==
==J2 even pins (2 to 140)==
==J3 odd pins (1 to 139)==
==J3 even pins (2 to 140)==
{{Applies To BoraX}}
{{InfoBoxBottom}}
==Introduction==
This chapter contains the pinout description of the BORA Xpress module, grouped in six tables (two – odd and even pins – for each connector) that report the pin mapping of the three 140-pin BORA Xpress connectors.
Each row in the pinout tables contains the following information:
* Pin: reference to the connector pin
* Pin Name: pin (signal) name on the BORA Xpress connectors
* Internal connections: connections to the BORA Xpress components
** CPU.<x> : pin connected to CPU (processing system) pad named <x>
** FPGA.<x>: pin connected to FPGA (programmable logic) pad named <x>
** CAN.<x> : pin connected to the CAN transceiver
** LAN.<x> : pin connected to the LAN PHY
** USB.<x> : pin connected to the USB transceiver
** NAND.<x>: pin connected to the flash NAND
** NOR.<x>: pin connected to the flash NOR
** SV.<x>: pin connected to voltage supervisor
** MTR: pin connected to voltage monitors
* Ball/pin #: Component ball/pin number connected to signal
* Supply Group: Power Supply Group
* Type: pin type
** I = Input
** O = Output
** D = Differential
** Z = High impedance
** S = Power supply voltage
** G = Ground
** A = Analog signal
* Voltage: I/O voltage levels
==J1 odd pins (1 to 139)==
==J1 even pins (2 to 140)==
==J2 odd pins (1 to 139)==
==J2 even pins (2 to 140)==
==J3 odd pins (1 to 139)==
==J3 even pins (2 to 140)==
