RTC (Naon)

From DAVE Developer's Wiki
Jump to: navigation, search
Info Box
Naon am387x-dm814x.png Applies to Naon
Maya 03.png Applies to Maya
Dido-main.png Applies to Dido


The TPS659113 datasheet is TI Confidential and is subject to NDA Restrictions

Introduction[edit | edit source]

On Naon, Maya and Dido SoMs, the TPS659113 PMIC provides a real-time clock (RTC) resource with

  • Oscillator for 32.768-kHz crystal
  • Date, time and calendar
  • Alarm capability
  • Backup power from external battery

Backup power is provided through the VBAT (J2.16) signal. If not used, VBAT must be externally connected to GND.

Interrupt[edit | edit source]

The INT1 signal on the PMIC (default active low) warns the host processor of any event that has occurred on the TPS659113 device. The host processor can then poll the interrupt from the interrupt status register through I2C to identify the interrupt source.

Interrupt pin[edit | edit source]

  • On Naon/Dido: the INT1 signal is connected to the G6 DM814x microprocessor ball, corresponding to the MCA[3]_ACLKX/GP0[16] pin
  • On Maya: the INT1 signal is connected to the Y23 DM814x microprocessor ball, corresponding to the VOUT[1]_G_Y_YC[3]/EMAC[1]_MRXD[6]/VIN[1]A_D[8]/PATA_D[0]/GP3[7] pin

Please refer to the DM814x Datasheet for more information on microprocessor pins.