RIALTO SBC/Interfaces and Connectors/USB ports
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2024/01/12 | First documentation release | ||
USB ports[edit | edit source]
Description[edit | edit source]
RIALTO SBC provides two USB ports, one HOST and one OTG:
- J48 is a standard USB HOST 2.0 Type A connector
- J55 is a micro-AB type receptacle for a USB OTG connection: this interface can operate in Host mode and Device (peripheral) mode
Signals[edit | edit source]
The following table describes the interface signals:
USB HOST[edit | edit source]
| Pin# | Pin name | Pin function | Pin Notes |
|---|---|---|---|
| 1 | USB_HOST_5V | VBUS | |
| 2 | USB_DM1 | USB Host Data - | |
| 3 | USB_DP1 | USB Host Data + | |
| 4 | DGND | Ground | |
| 5, 6, 7, 8 | PCB_GND_RNG | Shield |
USB OTG[edit | edit source]
| Pin# | Pin name | Pin function | Pin Notes |
|---|---|---|---|
| 1 | VBUS_OTG_5V | VBUS | |
| 2 | USB_DM2 | USB OTG Data - | |
| 3 | USB_DP2 | USB OTG Data + | |
| 4 | PA8 | USB OTG ID | |
| 5 | GND | Ground | |
| 6, 7, 8 | PCB_GND_RNG | Shield |
Device mapping[edit | edit source]
The USB Host port can be used under Linux for connecting USB peripheral devices: the related peripheral driver has to be integrated into the Linux kernel.
The USB OTG feature can be easily tested using the Mass Storage Gadget driver.
