Memory organization (Maya)

From DAVE Developer's Wiki
Jump to: navigation, search


Info Box
Maya 03.png Applies to Maya

Introduction[edit | edit source]

Maya memory organization and mapping is relatively simple.

About system RAM, DM8148 provides two controllers. Each one can be interfaced to one SDRAM bank through a physical interface called EMIF (EMIF0 and EMIF1). EMIF0 is connected to 32-bit DDR2 SDRAM bank (up to 512 MByte). EMIF1 is not connected to any device, hence is permanently disabled.

About non-volatile memories, 8-bit NAND flash is conneted to processor through GPMC bus. Associated chip select is CS0n in order to make it work as boot device.