Building U-Boot (BELK/BXELK)

From DAVE Developer's Wiki
(Redirected from Building U-Boot (BELK))
Jump to: navigation, search
Info Box
Bora5-small.jpg Applies to Bora
BORA Xpress.png Applies to BORA Xpress
200px-Emblem-important.svg.png As the structure of the BELK/BXELK is based on several tools, it is strongly recommended the reading of this document first. 200px-Emblem-important.svg.png


Version Date BELK/BXELK version Notes
1.0.0 November 2015 3.0.0 / N/A First release
2.0.0 July 2017 4.0.0 / 2.0.0 Udates for BELK 4.0.0 / BXELK 2.0.0


It is assumed that the development environment has been set up properly as described here.

  • start the Linux development server and login into the system
  • assuming that a local repository has not been created, clone the remote U-Boot git repository (the “-b” option is used to automatically checkout the current branch):

git clone -b bora-4.x.x

  • Setup the server environment (please refer to this section)
  • enter the source tree directory and select the desired target by issuing one of the following commands:
    • For BELK <= 3.0.2 and BXELK <= 1.0.1:
      make bora_qspi_config 
      make bora_mmc_config 
      make bora_noflash_config
    • For BELK 4.0.0 or newer and BXELK 2.0.0 or newer:
      make bora_qspi_defconfig 
      make bora_mmc_defconfig 
      make bora_noflash_defconfig 
      make borax_qspi_defconfig 
      make borax_mmc_defconfig 
      make borax_noflash_defconfig
bora_qspi and borax_qspi: U-Boot is built to use NOR flashed based environment.
bora_mmc and bora_mmc: U-Boot environment is placed in SD/MMC card.
bora_noflash and bora_noflash: U-Boot environment is placed in SD/MMC card. NOR flash and NAND flash are disabled.
  • build U-Boot by issuing make command. This will generate U-Boot binary images.

Subsequent builds just require make command, without targets, to update the binary images.

200px-Emblem-important.svg.png By default, BoraEVB and BoraXEVB are configured to boot from NOR flash. Consequently, the U-Boot image stored in the NOR flash is built with bora_qspi and borax_qspi configuration respectively. 200px-Emblem-important.svg.png

In order to download them to the target via TFPT protocol, once the build process is complete the binary images can be copied to the tftp root directory (e.g. /srv/tftp/belk/) with the following commands:

  • For BELK 4.0.0 or newer and BXELK 2.0.0 or newer:
cp spl/boot.bin /srv/tftp/belk/ 
cp u-boot.img /srv/tftp/belk/
  • For BELK <= 3.0.2 and BXELK <= 1.0.1 :
cp u-boot.bin /srv/tftp/belk/