BORA Lite SOM/BORA Lite Evaluation Kit/Interfaces and Connectors/CAN
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2021/10/28 | New documentation layout | ||
Contents
CAN[edit | edit source]
CAN - J24[edit | edit source]
J24 is a 10-pin 5x2x2.54mm pitch vertical header directly connected to BORA Xpress SoM's transceiver for the CAN interface. This 2.5mm-pitch header is compatible with commonly available IDC-10/DB9 flat cables. The following table reports the pinout of the connector:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1, 6, 7, 8, 9, 10 |
N.C. | - | - |
| 2, 5 | CAN_SHIELD | - | - |
| 3 | CAN_L | - | - |
| 4 | CAN_H | - | - |
The S7 switch enables the insertion of a 120ohm CAN termination resistor at the transmitter side.
