XUELK-AN-001: Using WiFi-Bluetooth combo plugin with SBC Lynx
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Contents
HistoryEdit
| Version | Date | XUELK version | Notes |
|---|---|---|---|
| 1.0.0 | August 2016 | 1.0.0 | First public release |
IntroductionEdit
SBC Lynx can be populated with DWM WiFi/Bluetooth combo plugin to easily add wireless connectivity.
This application note describes how to enable these interfaces when working with XUELK 1.0.0
LimitationsEdit
DWM wireless module shares some signals with mezzanine board connector J53. Thus, when DWM module is used, the following signals must be left floating:
- J53.1 (UART2_RX_DATA)
- J53.2 (UART2_nRTS)
- J53.3 (UART2_TX_DATA)
- J53.4 (UART2_nCTS).