| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
HistoryEdit
| Version | Date | Divelk version | Hardware Part Nr | Notes |
|---|---|---|---|---|
| 4.0.0 | April 2018 | DIVELK 4.0.0 | DIVELK 4.0.0 |
CalibrationEdit
To calibrate the touchscreen, please do the following:
rm /etc/udev/rules.d/ws-calibrate.rules reboot
At the next restart the weston-calibrator tool should automatically show up. Tap on the red cross appearing on the screen to calibrate the touch panel.
Note: In the case that the filesystem is mounted via NFS and that an additional sdcard is plugged in, make sure delete also the calibration rules stored in the sdcard partition before rebooting.
rm /etc/udev/rules.d/ws-calibrate.rules rm /run/media/mmcblk0p1/ws-calibrate.rules reboot
Additional information can be found at the following link