Thermal tests and measurements (SBCX)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Contents
History[edit | edit source]
| Version | Date | Notes |
|---|---|---|
| First public release |
Introduction[edit | edit source]
This document describes the tests that have been performed on SBCX board to characterize thermal behavior of some configurations. The results here presented can be used by integrators building systems upon SBCX board as a basis for comparison. In fact, as stated in the SBCX's Hardware Manual, systems integrators have to perform thermal analysis on the application's definitive configuration that generally differs significantly with respect to the use cases here described, in terms of both hardware and software.
Test beds[edit | edit source]
Five different test beds have been considered. From the electronics point of view, all of them are based on the following parts:
- SBCX equipped iMX6 Dual Lite processor (maximum frequency = TBD) and 1GB SDRAM
- LCD TBD.
Common settings:
- Linux governor:
- LCD backlight intensity: 100%
- test bed #1
- Tamb = TBD °C
- system layout - SBCX
tbd inserire foto
- test bed #2:
- Tamb = TBD °C
- system layout - SBCX
tbd inserire foto
- test bed #3:
- Tamb = TBD °C
- system layout - SBCX
tbd inserire foto
- test bed #4:
- Tamb = TBD °C
- system layout - SBCX
tbd inserire foto
- test bed #5:
- Tamb = TBD °C
- system layout - SBCX
tbd inserire foto
