Open main menu

DAVE Developer's Wiki β

Changes

Hardware Manual (Diva)

936 bytes added, 10:20, 19 March 2018
→‎Pinout table
| 153||EMAC0_PHY_LED_SPEED||ETHPHY.LED2/nINTSEL||2||||||||10kOhm pull-down
|-
| 154||NC/OUT_PMIC_VRTC//OUT_VDD3_SMPS//OUT_VDIG1||||||||||||By default, this pin must not be connected. Optionally, it can route power voltages generated by Diva PSU. This option is meant to allow monitoring of such voltages by carrier board circuitry. It is not meant to power carrier board devices. For more informationAs these options requires custom manufacturing BOMs, please contact technical supportthe [mailto:sales@dave.eu Sales Department] for more information.
|-
| 155||EMAC0_PHY_LED_LINK/ACT||ETHPHY.LED1/nREGOFF||3||||||||
|-
| 156||NC/Monitoring||||||||||||By default, this pin must not be connected. Optionally, it can route power voltages generated by Diva PSU. This option is meant to allow monitoring of such voltages by carrier board circuitry. It is not meant to power carrier board devices. For more informationAs these options requires custom manufacturing BOMs, please contact technical supportthe [mailto:sales@dave.eu Sales Department] for more information.
|-
| 157||AM335X_GMII1_TXD3||CPU.[GMII1_TXD3/DCAN0_TX/RGMII1_TD3/UART4_RXD/MCASP1_FSX/MMC2_DAT1/MCASP0_FSR/GPIO0_16]||J18||||||||
|-
| 158||NC/Monitoring||||||||||||By default, this pin must not be connected. Optionally, it can route power voltages generated by Diva PSU. This option is meant to allow monitoring of such voltages by carrier board circuitry. It is not meant to power carrier board devices. For more informationAs these options requires custom manufacturing BOMs, please contact technical supportthe [mailto:sales@dave.eu Sales Department] for more information.
|-
| 159||AM335X_GMII1_TXD2||CPU.[GMII1_TXD2/DCAN0_RX/RGMII1_TD2/UART4_TXD/MCASP1_AXR0/MMC2_DAT2/MCASP0_AHCLKX/GPIO0_17]||K15||||||||Internally connected to the WDT (if present) – HW option
|-
| 160||NC/Monitoring||||||||||||By default, this pin must not be connected. Optionally, it can route power voltages generated by Diva PSU. This option is meant to allow monitoring of such voltages by carrier board circuitry. It is not meant to power carrier board devices. For more informationAs these options requires custom manufacturing BOMs, please contact technical supportthe [mailto:sales@dave.eu Sales Department] for more information.
|-
| 161||DGND||||||||||||
|-
| 162||NC/Monitoring||||||||||||By default, this pin must not be connected. Optionally, it can route power voltages generated by Diva PSU. This option is meant to allow monitoring of such voltages by carrier board circuitry. It is not meant to power carrier board devices. For more informationAs these options requires custom manufacturing BOMs, please contact technical supportthe [mailto:sales@dave.eu Sales Department] for more information.
|-
| 163||AM335X_GMII1_RXDV||CPU.[GMII1_RXDV/LCD_MEMORY_CLK/RGMII1_RCTL/UART5_TXD/MCASP1_ACLKX/MMC2_DAT0/MCASP0_ACLKR/GPIO3_4]||J17||||||||
|-
| 164||NC/Monitoring||||||||||||By default, this pin must not be connected. Optionally, it can route power voltages generated by Diva PSU. This option is meant to allow monitoring of such voltages by carrier board circuitry. It is not meant to power carrier board devices. For more informationAs these options requires custom manufacturing BOMs, please contact technical supportthe [mailto:sales@dave.eu Sales Department] for more information.
|-
| 165||AM335X_GMII1_MDIO_CLK||CPU.[MDIO_CLK/TIMER5/UART5_TXD/UART3_RTSN/MMC0_SDWP/MMC1_CLK/MMC2_CLK/GPIO0_1]||M18||||||||Internally connected to the ETH PHY
|-
| 166||NC/Monitoring||||||||||||By default, this pin must not be connected. Optionally, it can route power voltages generated by Diva PSU. This option is meant to allow monitoring of such voltages by carrier board circuitry. It is not meant to power carrier board devices. For more informationAs these options requires custom manufacturing BOMs, please contact technical supportthe [mailto:sales@dave.eu Sales Department] for more information.
|-
| 167||AM335X_GMII1_MDIO_DATA||CPU.[MDIO_DATA/TIMER6/UART5_RXD/UART3_CTSN/MMC0_SDCD/MMC1_CMD/MMC2_CMD/GPIO0_0]||M17||||||||Internally connected to the ETH PHY
|-
| 168||NC/Monitoring||||||||||||By default, this pin must not be connected. Optionally, it can route power voltages generated by Diva PSU. This option is meant to allow monitoring of such voltages by carrier board circuitry. It is not meant to power carrier board devices. For more informationAs these options requires custom manufacturing BOMs, please contact technical supportthe [mailto:sales@dave.eu Sales Department] for more information.
|-
| 169||AM335X_GMII1_COL||CPU.[GMII1_COL/RMII2_REFCLK/SPI1_SCLK/UART5_RXD/MCASP1_AXR2/MMC2_DAT3/MCASP0_AXR2/GPIO3_0]||H16||||||||Internally used for DDR power management (if required) – HW option
| 175||AM335X_GMII1_RXCLK||CPU.[GMII1_RXCLK/UART2_TXD/RGMII1_RCLK/MMC0_DAT6/MMC1_DAT1/UART1_DSRN/MCASP0_FSX/GPIO3_10]||L18||||||||
|-
| 176||NC/Monitoring||||||||||||By default, this pin must not be connected. Optionally, it can route power voltages generated by Diva PSU. This option is meant to allow monitoring of such voltages by carrier board circuitry. It is not meant to power carrier board devices. For more informationAs these options requires custom manufacturing BOMs, please contact technical supportthe [mailto:sales@dave.eu Sales Department] for more information.
|-
| 177||AM335X_GMII1_TXCLK||CPU.[GMII1_TXCLK/UART2_RXD/RGMII1_TCLK/MMC0_DAT7/MMC1_DAT0/UART1_DCDN/MCASP0_ACLKX/GPIO3_9]||K18||||||||
|-
| 178||NC/Monitoring||||||||||||By default, this pin must not be connected. Optionally, it can route power voltages generated by Diva PSU. This option is meant to allow monitoring of such voltages by carrier board circuitry. It is not meant to power carrier board devices. For more informationAs these options requires custom manufacturing BOMs, please contact technical supportthe [mailto:sales@dave.eu Sales Department] for more information.
|-
| 179||PMIC_CLK32OUT||PMIC.CLK32KOUT||PMIC.38||||||||
| 181||DGND||||||||||||
|-
| 182||NC/Monitoring||||||||||||By default, this pin must not be connected. Optionally, it can route power voltages generated by Diva PSU. This option is meant to allow monitoring of such voltages by carrier board circuitry. It is not meant to power carrier board devices. For more informationAs these options requires custom manufacturing BOMs, please contact technical supportthe [mailto:sales@dave.eu Sales Department] for more information.
|-
| 183||PMIC_PWR_EN||CPU.PMIC_PWR_EN, PMIC.PWRHOLD||CPU.C6, PMIC.1||||||||
|-
| 184||NC/Monitoring||||||||||||By default, this pin must not be connected. Optionally, it can route power voltages generated by Diva PSU. This option is meant to allow monitoring of such voltages by carrier board circuitry. It is not meant to power carrier board devices. For more informationAs these options requires custom manufacturing BOMs, please contact technical supportthe [mailto:sales@dave.eu Sales Department] for more information.
|-
| 185||PMIC_INT1||PMIC.INT1||45||||||||
U0001
Bureaucrats, dave_user, Administrators
4,650
edits
Retrieved from "https://wiki.dave.eu/index.php/Special:MobileDiff/7620"