RIALTO SBC/Interfaces and Connectors/RTC
< RIALTO SBC
Revision as of 15:20, 12 January 2024 by U0007 (talk | contribs) (Created page with "<section begin=History/> {| style="border-collapse:collapse; " !colspan="4" style="width:100%; text-align:left"; border-bottom:solid 2px #ededed"|History |- !style="border-le...")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2024/01/12 | First documentation release | ||
RTC[edit | edit source]
Description[edit | edit source]
RIALTO SBC uses an external I2C RTC device, i.e. M41T83SQA6F.
An external lithium battery (like Panasonic ML-1220/V1AN rechargeable battery) can be optionally mounted on RIALTO SBC.
Signals[edit | edit source]
The following table describes the interface signals:
| Pin# | Pin name | Pin function | Pin Notes |
|---|---|---|---|
| 1 | RTC_LICELL | VBAT | coin cell battery network has to be properly configured for lithium battery recharge current |
| 2 | GND | Ground |
Device mapping[edit | edit source]
RTC is mapped to /dev/rtc0 device in Linux.
Device usage[edit | edit source]
The peripheral can be accessed through the date and hwclock linux commands.
