Difference between revisions of "ORCA-TN-001 — Running Armbian Bullseye (Debian 11)"
| Line 20: | Line 20: | ||
==Testbed== | ==Testbed== | ||
| − | == | + | ==Building and deploying the root file system onto the target== |
https://armbian.site-meganet.com/dl/uefi-arm64/archive/Armbian_22.11.1_Uefi-arm64_bullseye_current_5.15.80_minimal.img.xz | https://armbian.site-meganet.com/dl/uefi-arm64/archive/Armbian_22.11.1_Uefi-arm64_bullseye_current_5.15.80_minimal.img.xz | ||
| Line 46: | Line 46: | ||
... | ... | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | root@uefi-arm64:~# | + | root@uefi-arm64:~# cat /etc/fstab |
| − | + | UUID=41eabd71-ef7f-4a75-94a0-3a55dbacbaea / ext4 defaults,noatime,commit=600,errors=remount-ro 0 1 | |
| − | + | #UUID=7EEE-611C /boot/efi vfat defaults 0 2 | |
| − | + | tmpfs /tmp tmpfs defaults,nosuid 0 0 | |
| − | |||
| − | |||
| + | ==Bootstrap process== | ||
| + | U-Boot SPL 2020.04-desk-mx8m-l-2.0.0-rc2+fslc+g32087d457a (Dec 20 2022 - 15:01:10 +0000) | ||
| + | SOM ConfigID not found, using default | ||
| + | SOM ConfigID#: ffffffff | ||
| + | DDRINFO: start DRAM init | ||
| + | DDRINFO: DRAM rate 4000MTS | ||
| + | DDRINFO:ddrphy calibration done | ||
| + | DDRINFO: ddrmix config done | ||
| + | Normal Boot | ||
| + | Trying to boot from BOOTROM | ||
| + | image offset 0x8000, pagesize 0x200, ivt offset 0x0 | ||
| + | NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-0-g2a2678646 | ||
| + | NOTICE: BL31: Built : 22:11:34, Dec 15 2021 | ||
| + | |||
| + | |||
| + | U-Boot 2020.04-desk-mx8m-l-2.0.0-rc2+fslc+g32087d457a (Dec 20 2022 - 15:01:10 +0000) | ||
| + | |||
| + | CPU: i.MX8MP[8] rev1.1 1800 MHz (running at 1200 MHz) | ||
| + | CPU: Commercial temperature grade (0C to 95C) at 46C | ||
| + | Reset cause: POR | ||
| + | Model: DAVE i.MX8MPlus on SBC ORCA Rev A | ||
| + | DRAM: 6 GiB | ||
| + | TCPC: Vendor ID [0x1fc9], Product ID [0x5110], Addr [I2C2 0x50] | ||
| + | tcpc_init: Can't find device id=0x3d | ||
| + | MMC: FSL_SDHC: 1, FSL_SDHC: 2 | ||
| + | Loading Environment from MMC... OK | ||
| + | Fail to setup video link | ||
| + | In: serial | ||
| + | Out: serial | ||
| + | Err: serial | ||
| + | |||
| + | BuildInfo: | ||
| + | - ATF 2a26786 | ||
| + | - U-Boot 2020.04-desk-mx8m-l-2.0.0-rc2+fslc+g32087d457a | ||
| + | |||
| + | SOM ConfigID not found, using default | ||
| + | SOM ConfigID#: ffffffff | ||
| + | SOM UniqueID#: 0002aaff:a32f16cc | ||
| + | CB ConfigID#: 00001001 | ||
| + | CB UniqueID#: 00000000:00000000 | ||
| + | SOM ConfigID not found, using default | ||
| + | SOM: Unknown on SBC ORCA | ||
| + | switch to partitions #0, OK | ||
| + | mmc1 is current device | ||
| + | flash target is MMC:1 | ||
| + | Net: | ||
| + | Warning: ethernet@30be0000 (eth0) using random MAC address - 5e:83:9d:9b:04:e4 | ||
| + | eth0: ethernet@30be0000 | ||
| + | Fastboot: Normal | ||
| + | Normal Boot | ||
| + | Hit any key to stop autoboot: 0 | ||
| + | switch to partitions #0, OK | ||
| + | mmc1 is current device | ||
| + | 1084 bytes read in 13 ms (81.1 KiB/s) | ||
| + | Running bootscript from mmc ... | ||
| + | ## Executing script at 40480000 | ||
| + | bootscript generated with command "mkimage -A ARM -T script -C none -n DESK-MX8M -d bootscript.txt boot.scr" | ||
| + | Booting DESK-MX8M via mmcboot with imx8mp-mito8mplus-cb1001.dtb as device tree | ||
| + | 30931456 bytes read in 1325 ms (22.3 MiB/s) | ||
| + | 59285 bytes read in 19 ms (3 MiB/s) | ||
| + | ## Flattened Device Tree blob at 43000000 | ||
| + | Booting using the fdt blob at 0x43000000 | ||
| + | Using Device Tree in place at 0000000043000000, end 0000000043011794 | ||
| + | |||
| + | Starting kernel ... | ||
| + | |||
| + | [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | ||
| + | [ 0.000000] Linux version 5.15.32-00007-gfe10aa07dfca-dirty (rborsellino@bionicbakery) (aarch64-poky-linux-gcc (GCC) 11.2.0, GNU ld ( | ||
| + | GNU Binutils) 2.38.20220313) #2 SMP PREEMPT Wed Oct 26 08:58:42 CEST 2022 | ||
| + | [ 0.000000] Machine model: i.MX8MPlus Mito8MPlus on SBC Orca | ||
| + | [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x0000000030890000 (options '115200') | ||
| + | [ 0.000000] printk: bootconsole [ec_imx6q0] enabled | ||
| + | [ 0.000000] efi: UEFI not found. | ||
| + | [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000c4000000, size 960 MiB | ||
| + | [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | ||
| + | [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000094300000, size 1 MiB | ||
| + | [ 0.000000] OF: reserved mem: initialized node vdev0buffer@94300000, compatible id shared-dma-pool | ||
| + | [ 0.000000] NUMA: No NUMA configuration found | ||
| + | [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000001bfffffff] | ||
| + | [ 0.000000] NUMA: NODE_DATA [mem 0x1bf44f800-0x1bf451fff] | ||
| + | [ 0.000000] Zone ranges: | ||
| + | [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] | ||
| + | [ 0.000000] DMA32 empty | ||
| + | [ 0.000000] Normal [mem 0x0000000100000000-0x00000001bfffffff] | ||
| + | [ 0.000000] Movable zone start for each node | ||
| + | [ 0.000000] Early memory node ranges | ||
| + | [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000557fffff] | ||
| + | [ 0.000000] node 0: [mem 0x0000000055800000-0x0000000055ffffff] | ||
| + | [ 0.000000] node 0: [mem 0x0000000058000000-0x00000000923fffff] | ||
| + | [ 0.000000] node 0: [mem 0x0000000092400000-0x00000000a43fffff] | ||
| + | [ 0.000000] node 0: [mem 0x00000000a4400000-0x00000001bfffffff] | ||
| + | [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000001bfffffff] | ||
| + | [ 0.000000] psci: probing for conduit method from DT. | ||
| + | [ 0.000000] psci: PSCIv1.1 detected in firmware. | ||
| + | [ 0.000000] psci: Using standard PSCI v0.2 function IDs | ||
| + | [ 0.000000] psci: Trusted OS migration not required | ||
| + | [ 0.000000] psci: SMC Calling Convention v1.1 | ||
| + | [ 0.000000] percpu: Embedded 20 pages/cpu s41176 r8192 d32552 u81920 | ||
| + | [ 0.000000] Detected VIPT I-cache on CPU0 | ||
| + | [ 0.000000] CPU features: detected: GIC system register CPU interface | ||
| + | [ 0.000000] CPU features: detected: ARM erratum 845719 | ||
| + | [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1540096 | ||
| + | [ 0.000000] Policy zone: Normal | ||
| + | [ 0.000000] Kernel command line: console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200 root=/dev/mmcblk1p3 | ||
| + | [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | ||
| + | [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | ||
| + | [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | ||
| + | [ 0.000000] software IO TLB: mapped [mem 0x00000000c0000000-0x00000000c4000000] (64MB) | ||
| + | [ 0.000000] Memory: 4752512K/6258688K available (18560K kernel code, 1534K rwdata, 7072K rodata, 2944K init, 541K bss, 523136K reserv | ||
| + | ed, 983040K cma-reserved) | ||
| + | [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | ||
| + | [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | ||
| + | [ 0.000000] rcu: RCU event tracing is enabled. | ||
| + | [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. | ||
| + | [ 0.000000] Trampoline variant of Tasks RCU enabled. | ||
| + | [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | ||
| + | [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | ||
| + | [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | ||
| + | [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | ||
| + | [ 0.000000] GICv3: 160 SPIs implemented | ||
| + | [ 0.000000] GICv3: 0 Extended SPIs implemented | ||
| + | [ 0.000000] GICv3: Distributor has no Range Selector support | ||
| + | [ 0.000000] Root IRQ handler: gic_handle_irq | ||
| + | [ 0.000000] GICv3: 16 PPIs implemented | ||
| + | [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000 | ||
| + | [ 0.000000] ITS: No ITS available, not enabling LPIs | ||
| + | [ 0.000000] random: get_random_bytes called from start_kernel+0x474/0x660 with crng_init=0 | ||
| + | [ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys). | ||
| + | [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns | ||
| + | [ 0.000000] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns | ||
| + | [ 0.008452] Console: colour dummy device 80x25 | ||
| + | [ 0.012574] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000) | ||
| + | [ 0.022841] pid_max: default: 32768 minimum: 301 | ||
| + | [ 0.027528] LSM: Security Framework initializing | ||
| + | [ 0.032172] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | ||
| + | [ 0.039749] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | ||
| + | [ 0.048941] rcu: Hierarchical SRCU implementation. | ||
| + | [ 0.053747] EFI services will not be available. | ||
| + | [ 0.057332] smp: Bringing up secondary CPUs ... | ||
| + | [ 0.062081] Detected VIPT I-cache on CPU1 | ||
| + | [ 0.062105] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000 | ||
| + | [ 0.062140] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | ||
| + | [ 0.062560] Detected VIPT I-cache on CPU2 | ||
| + | [ 0.062578] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000 | ||
| + | [ 0.062597] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | ||
| + | [ 0.062991] Detected VIPT I-cache on CPU3 | ||
| + | [ 0.063010] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000 | ||
| + | [ 0.063030] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | ||
| + | [ 0.063094] smp: Brought up 1 node, 4 CPUs | ||
| + | [ 0.118314] SMP: Total of 4 processors activated. | ||
| + | [ 0.123031] CPU features: detected: 32-bit EL0 Support | ||
| + | [ 0.128207] CPU features: detected: 32-bit EL1 Support | ||
| + | [ 0.133356] CPU features: detected: CRC32 instructions | ||
| + | [ 0.145828] CPU: All CPU(s) started at EL2 | ||
| + | [ 0.147109] alternatives: patching kernel code | ||
| + | [ 0.153158] devtmpfs: initialized | ||
| + | [ 0.162466] KASLR disabled due to lack of seed | ||
| + | [ 0.164216] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | ||
| + | [ 0.173882] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | ||
| + | [ 0.216102] pinctrl core: initialized pinctrl subsystem | ||
| + | [ 0.219000] DMI not present or invalid. | ||
| + | [ 0.222712] NET: Registered PF_NETLINK/PF_ROUTE protocol family | ||
| + | [ 0.233145] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations | ||
| + | [ 0.237940] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | ||
| + | [ 0.245899] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | ||
| + | [ 0.253486] audit: initializing netlink subsys (disabled) | ||
| + | [ 0.258998] audit: type=2000 audit(0.200:1): state=initialized audit_enabled=0 res=1 | ||
| + | [ 0.259544] thermal_sys: Registered thermal governor 'step_wise' | ||
| + | [ 0.266619] thermal_sys: Registered thermal governor 'power_allocator' | ||
| + | [ 0.272925] cpuidle: using governor menu | ||
| + | [ 0.283320] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | ||
| + | [ 0.290054] ASID allocator initialised with 65536 entries | ||
| + | [ 0.296378] Serial: AMBA PL011 UART driver | ||
| + | [ 0.299571] imx mu driver is registered. | ||
| + | [ 0.303459] imx rpmsg driver is registered. | ||
| + | [ 0.318256] imx8mp-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver | ||
| + | [ 0.337368] platform 32fd8000.hdmi: Fixing up cyclic dependency with 32fc6000.lcd-controller | ||
| + | [ 0.364575] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages | ||
| + | [ 0.368469] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages | ||
| + | [ 0.375237] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages | ||
| + | [ 0.381933] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages | ||
| + | [ 0.389686] cryptd: max_cpu_qlen set to 1000 | ||
| + | [ 0.395774] ACPI: Interpreter disabled. | ||
| + | [ 0.397530] iommu: Default domain type: Translated | ||
| + | [ 0.401712] iommu: DMA domain TLB invalidation policy: strict mode | ||
| + | [ 0.408174] vgaarb: loaded | ||
| + | [ 0.410978] SCSI subsystem initialized | ||
| + | [ 0.414794] usbcore: registered new interface driver usbfs | ||
| + | [ 0.420033] usbcore: registered new interface driver hub | ||
| + | [ 0.425353] usbcore: registered new device driver usb | ||
| + | [ 0.431353] mc: Linux media interface: v0.10 | ||
| + | [ 0.434717] videodev: Linux video capture interface: v2.00 | ||
| + | [ 0.440277] pps_core: LinuxPPS API ver. 1 registered | ||
| + | [ 0.445194] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | ||
| + | [ 0.454401] PTP clock support registered | ||
| + | [ 0.458498] EDAC MC: Ver: 3.0.0 | ||
| + | [ 0.462556] FPGA manager framework | ||
| + | [ 0.464955] Advanced Linux Sound Architecture Driver Initialized. | ||
| + | [ 0.471511] Bluetooth: Core ver 2.22 | ||
| + | [ 0.474609] NET: Registered PF_BLUETOOTH protocol family | ||
| + | [ 0.479935] Bluetooth: HCI device and connection manager initialized | ||
| + | [ 0.486324] Bluetooth: HCI socket layer initialized | ||
| + | [ 0.491221] Bluetooth: L2CAP socket layer initialized | ||
| + | [ 0.496303] Bluetooth: SCO socket layer initialized | ||
| + | [ 0.501797] clocksource: Switched to clocksource arch_sys_counter | ||
| + | [ 0.507469] VFS: Disk quotas dquot_6.6.0 | ||
| + | [ 0.511302] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | ||
| + | [ 0.518318] pnp: PnP ACPI: disabled | ||
| + | [ 0.527865] NET: Registered PF_INET protocol family | ||
| + | [ 0.530114] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) | ||
| + | [ 0.540407] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) | ||
| + | [ 0.546229] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) | ||
| + | [ 0.554489] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) | ||
| + | [ 0.562451] TCP: Hash tables configured (established 65536 bind 65536) | ||
| + | [ 0.568221] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) | ||
| + | [ 0.575051] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) | ||
| + | [ 0.582411] NET: Registered PF_UNIX/PF_LOCAL protocol family | ||
| + | [ 0.588218] RPC: Registered named UNIX socket transport module. | ||
| + | [ 0.593819] RPC: Registered udp transport module. | ||
| + | [ 0.598553] RPC: Registered tcp transport module. | ||
| + | [ 0.603264] RPC: Registered tcp NFSv4.1 backchannel transport module. | ||
| + | [ 0.610422] PCI: CLS 0 bytes, default 64 | ||
| + | [ 0.614329] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available | ||
| + | [ 0.622618] kvm [1]: IPA Size Limit: 40 bits | ||
| + | [ 0.627805] kvm [1]: GICv3: no GICV resource entry | ||
| + | [ 0.631003] kvm [1]: disabling GICv2 emulation | ||
| + | [ 0.635467] kvm [1]: GIC system register CPU interface enabled | ||
| + | [ 0.641398] kvm [1]: vgic interrupt IRQ9 | ||
| + | [ 0.645379] kvm [1]: Hyp mode initialized successfully | ||
| + | [ 0.653435] Initialise system trusted keyrings | ||
| + | [ 0.655159] workingset: timestamp_bits=42 max_order=21 bucket_order=0 | ||
| + | [ 0.667445] squashfs: version 4.0 (2009/01/31) Phillip Lougher | ||
| + | [ 0.671002] NFS: Registering the id_resolver key type | ||
| + | [ 0.675546] Key type id_resolver registered | ||
| + | [ 0.679725] Key type id_legacy registered | ||
| + | [ 0.683818] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | ||
| + | [ 0.690488] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | ||
| + | [ 0.697943] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. | ||
| + | [ 0.704373] 9p: Installing v9fs 9p2000 file system support | ||
| + | [ 0.744904] Key type asymmetric registered | ||
| + | [ 0.746156] Asymmetric key parser 'x509' registered | ||
| + | [ 0.751099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) | ||
| + | [ 0.758491] io scheduler mq-deadline registered | ||
| + | [ 0.763040] io scheduler kyber registered | ||
| + | [ 0.773725] EINJ: ACPI disabled. | ||
| + | [ 0.784543] imx-sdma 30bd0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2 | ||
| + | [ 0.787457] mxs-dma 33000000.dma-apbh: initialized | ||
| + | [ 0.792209] imx-sdma 30bd0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin | ||
| + | [ 0.798661] SoC: i.MX8MP revision 1.1 | ||
| + | [ 0.810800] Bus freq driver module loaded | ||
| + | [ 0.820322] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | ||
| + | [ 0.825997] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 31, base_baud = 5000000) is a IMX | ||
| + | [ 0.833120] 30880000.serial: ttymxc2 at MMIO 0x30880000 (irq = 32, base_baud = 5000000) is a IMX | ||
| + | [ 0.841867] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 33, base_baud = 1500000) is a IMX | ||
| + | [ 0.850339] printk: console [ttymxc1] enabled | ||
| + | [ 0.850339] printk: console [ttymxc1] enabled | ||
| + | [ 0.858975] printk: bootconsole [ec_imx6q0] disabled | ||
| + | [ 0.858975] printk: bootconsole [ec_imx6q0] disabled | ||
| + | [ 0.882487] loop: module loaded | ||
| + | [ 0.887025] megasas: 07.717.02.00-rc1 | ||
| + | [ 0.892265] imx ahci driver is registered. | ||
| + | [ 0.901941] tun: Universal TUN/TAP device driver, 1.6 | ||
| + | [ 0.907894] thunder_xcv, ver 1.0 | ||
| + | [ 0.911167] thunder_bgx, ver 1.0 | ||
| + | [ 0.914436] nicpf, ver 1.0 | ||
| + | [ 0.919391] hclge is initializing | ||
| + | [ 0.922730] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version | ||
| + | [ 0.929960] hns3: Copyright (c) 2017 Huawei Corporation. | ||
| + | [ 0.935325] e1000: Intel(R) PRO/1000 Network Driver | ||
| + | [ 0.940209] e1000: Copyright (c) 1999-2006 Intel Corporation. | ||
| + | [ 0.945999] e1000e: Intel(R) PRO/1000 Network Driver | ||
| + | [ 0.950969] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | ||
| + | [ 0.956928] igb: Intel(R) Gigabit Ethernet Network Driver | ||
| + | [ 0.962336] igb: Copyright (c) 2007-2014 Intel Corporation. | ||
| + | [ 0.967941] igbvf: Intel(R) Gigabit Virtual Function Network Driver | ||
| + | [ 0.974221] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | ||
| + | [ 0.980333] sky2: driver version 1.30 | ||
| + | [ 0.984635] usbcore: registered new interface driver r8152 | ||
| + | [ 0.990349] VFIO - User Level meta-driver version: 0.3 | ||
| + | [ 1.000832] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | ||
| + | [ 1.007439] ehci-pci: EHCI PCI platform driver | ||
| + | [ 1.011937] ehci-platform: EHCI generic platform driver | ||
| + | [ 1.017383] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | ||
| + | [ 1.023597] ohci-pci: OHCI PCI platform driver | ||
| + | [ 1.028085] ohci-platform: OHCI generic platform driver | ||
| + | [ 1.034134] usbcore: registered new interface driver uas | ||
| + | [ 1.039500] usbcore: registered new interface driver usb-storage | ||
| + | [ 1.045574] usbcore: registered new interface driver usbserial_generic | ||
| + | [ 1.052128] usbserial: USB Serial support registered for generic | ||
| + | [ 1.058168] usbcore: registered new interface driver ftdi_sio | ||
| + | [ 1.063937] usbserial: USB Serial support registered for FTDI USB Serial Device | ||
| + | [ 1.071283] usbcore: registered new interface driver usb_serial_simple | ||
| + | [ 1.077836] usbserial: USB Serial support registered for carelink | ||
| + | [ 1.083946] usbserial: USB Serial support registered for zio | ||
| + | [ 1.089631] usbserial: USB Serial support registered for funsoft | ||
| + | [ 1.095662] usbserial: USB Serial support registered for flashloader | ||
| + | [ 1.102047] usbserial: USB Serial support registered for google | ||
| + | [ 1.107990] usbserial: USB Serial support registered for libtransistor | ||
| + | [ 1.114539] usbserial: USB Serial support registered for vivopay | ||
| + | [ 1.120566] usbserial: USB Serial support registered for moto_modem | ||
| + | [ 1.126858] usbserial: USB Serial support registered for motorola_tetra | ||
| + | [ 1.133491] usbserial: USB Serial support registered for novatel_gps | ||
| + | [ 1.139866] usbserial: USB Serial support registered for hp4x | ||
| + | [ 1.145637] usbserial: USB Serial support registered for suunto | ||
| + | [ 1.151580] usbserial: USB Serial support registered for siemens_mpi | ||
| + | [ 1.157969] usbcore: registered new interface driver usb_ehset_test | ||
| + | [ 1.168257] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0 | ||
| + | [ 1.174480] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:09:45 UTC (585) | ||
| + | [ 1.183850] i2c_dev: i2c /dev entries driver | ||
| + | [ 1.192344] Bluetooth: HCI UART driver ver 2.3 | ||
| + | [ 1.196819] Bluetooth: HCI UART protocol H4 registered | ||
| + | [ 1.201970] Bluetooth: HCI UART protocol BCSP registered | ||
| + | [ 1.207304] Bluetooth: HCI UART protocol LL registered | ||
| + | [ 1.212449] Bluetooth: HCI UART protocol ATH3K registered | ||
| + | [ 1.217873] Bluetooth: HCI UART protocol Three-wire (H5) registered | ||
| + | [ 1.224247] Bluetooth: HCI UART protocol Broadcom registered | ||
| + | [ 1.229943] Bluetooth: HCI UART protocol QCA registered | ||
| + | [ 1.235393] EDAC MC: ECC not enabled | ||
| + | [ 1.240412] sdhci: Secure Digital Host Controller Interface driver | ||
| + | [ 1.246615] sdhci: Copyright(c) Pierre Ossman | ||
| + | [ 1.251717] Synopsys Designware Multimedia Card Interface Driver | ||
| + | [ 1.258476] sdhci-pltfm: SDHCI platform and OF driver helper | ||
| + | [ 1.266312] ledtrig-cpu: registered to indicate activity on CPUs | ||
| + | [ 1.273834] usbcore: registered new interface driver usbhid | ||
| + | [ 1.279425] usbhid: USB HID core driver | ||
| + | [ 1.287730] cs_system_cfg: CoreSight Configuration manager initialised | ||
| + | [ 1.296034] optee: probing for conduit method. | ||
| + | [ 1.297209] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA | ||
| + | [ 1.300507] optee: revision 3.10 (a991c904) | ||
| + | [ 1.301262] optee: dynamic shared memory is enabled | ||
| + | [ 1.316954] optee: initialized driver | ||
| + | [ 1.323636] Galcore version 6.4.3.p4.398061 | ||
| + | [ 1.386570] mmc2: new HS400 Enhanced strobe MMC card at address 0001 | ||
| + | [ 1.394329] mmcblk2: mmc2:0001 DG4008 7.28 GiB | ||
| + | [ 1.401873] mmcblk2: p1 p2 | ||
| + | [ 1.406410] mmcblk2boot0: mmc2:0001 DG4008 4.00 MiB | ||
| + | [ 1.413160] mmcblk2boot1: mmc2:0001 DG4008 4.00 MiB | ||
| + | [ 1.419986] mmcblk2rpmb: mmc2:0001 DG4008 4.00 MiB, chardev (234:0) | ||
| + | [ 1.441381] [drm] Initialized vivante 1.0.0 20170808 for 40000000.mix_gpu_ml on minor 0 | ||
| + | [ 1.451090] hantrodec 0 : module inserted. Major = 511 | ||
| + | [ 1.456704] hantrodec 1 : module inserted. Major = 511 | ||
| + | [ 1.463267] hantroenc: HW at base <0000000038320000> with ID <0x80006200> | ||
| + | [ 1.470198] hx280enc: module inserted. Major <510> | ||
| + | [ 1.478003] NET: Registered PF_LLC protocol family | ||
| + | [ 1.483307] NET: Registered PF_INET6 protocol family | ||
| + | [ 1.490180] Segment Routing with IPv6 | ||
| + | [ 1.493878] In-situ OAM (IOAM) with IPv6 | ||
| + | [ 1.497850] NET: Registered PF_PACKET protocol family | ||
| + | [ 1.503607] Bluetooth: RFCOMM TTY layer initialized | ||
| + | [ 1.508507] Bluetooth: RFCOMM socket layer initialized | ||
| + | [ 1.513682] Bluetooth: RFCOMM ver 1.11 | ||
| + | [ 1.517452] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | ||
| + | [ 1.522770] Bluetooth: BNEP filters: protocol multicast | ||
| + | [ 1.528014] Bluetooth: BNEP socket layer initialized | ||
| + | [ 1.532983] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 | ||
| + | [ 1.538918] Bluetooth: HIDP socket layer initialized | ||
| + | [ 1.544578] 8021q: 802.1Q VLAN Support v1.8 | ||
| + | [ 1.548798] lib80211: common routines for IEEE802.11 drivers | ||
| + | [ 1.554571] 9pnet: Installing 9P2000 support | ||
| + | [ 1.558883] tsn generic netlink module v1 init... | ||
| + | [ 1.563656] Key type dns_resolver registered | ||
| + | [ 1.568791] Loading compiled-in X.509 certificates | ||
| + | [ 1.598302] regulator-se050-en GPIO handle specifies active low - ignored | ||
| + | [ 1.605616] reg-fixed-voltage regulator-csi-en: nonexclusive access to GPIO for regulator-csi-en | ||
| + | [ 1.775644] i2c i2c-0: IMX I2C adapter registered | ||
| + | [ 1.781288] i2c 1-003c: Fixing up cyclic dependency with 32e40000.csi | ||
| + | [ 1.788025] ov5640 1-003c: supply DOVDD not found, using dummy regulator | ||
| + | [ 1.794839] ov5640 1-003c: supply AVDD not found, using dummy regulator | ||
| + | [ 1.801498] ov5640 1-003c: supply DVDD not found, using dummy regulator | ||
| + | [ 1.809529] ov5640 1-003c: ov5640_read_reg: error: reg=300a | ||
| + | [ 1.815131] ov5640 1-003c: ov5640_check_chip_id: failed to read chip identifier | ||
| + | [ 1.822707] i2c i2c-1: IMX I2C adapter registered | ||
| + | [ 1.828562] i2c 2-003c: Fixing up cyclic dependency with 32e50000.csi | ||
| + | [ 1.835305] ov5640 2-003c: supply DOVDD not found, using dummy regulator | ||
| + | [ 1.842117] ov5640 2-003c: supply AVDD not found, using dummy regulator | ||
| + | [ 1.848775] ov5640 2-003c: supply DVDD not found, using dummy regulator | ||
| + | [ 1.856340] ov5640 2-003c: ov5640_read_reg: error: reg=300a | ||
| + | [ 1.861948] ov5640 2-003c: ov5640_check_chip_id: failed to read chip identifier | ||
| + | [ 1.869506] i2c i2c-2: IMX I2C adapter registered | ||
| + | [ 1.875170] i2c i2c-5: IMX I2C adapter registered | ||
| + | [ 1.880239] imx8mq-usb-phy 381f0040.usb-phy: supply vbus not found, using dummy regulator | ||
| + | [ 1.888739] imx8mq-usb-phy 382f0040.usb-phy: supply vbus not found, using dummy regulator | ||
| + | [ 1.898999] imx6q-pcie 33800000.pcie: supply epdev_on not found, using dummy regulator | ||
| + | [ 1.907074] imx6q-pcie 33800000.pcie: error -ENOENT: pcie_phy clock source missing or invalid | ||
| + | [ 1.915711] imx6q-pcie: probe of 33800000.pcie failed with error -2 | ||
| + | [ 1.926822] pps pps0: new PPS source ptp0 | ||
| + | [ 1.938742] fec 30be0000.ethernet eth0: registered PHC device 0 | ||
| + | [ 1.945510] imx-dwmac 30bf0000.ethernet: IRQ eth_lpi not found | ||
| + | [ 1.952246] imx-dwmac 30bf0000.ethernet: User ID: 0x10, Synopsys ID: 0x51 | ||
| + | [ 1.959054] imx-dwmac 30bf0000.ethernet: DWMAC4/5 | ||
| + | [ 1.963855] imx-dwmac 30bf0000.ethernet: DMA HW capability register supported | ||
| + | [ 1.970994] imx-dwmac 30bf0000.ethernet: RX Checksum Offload Engine supported | ||
| + | [ 1.978135] imx-dwmac 30bf0000.ethernet: TX Checksum insertion supported | ||
| + | [ 1.984840] imx-dwmac 30bf0000.ethernet: Wake-Up On Lan supported | ||
| + | [ 1.990991] imx-dwmac 30bf0000.ethernet: Enable RX Mitigation via HW Watchdog Timer | ||
| + | [ 1.998661] imx-dwmac 30bf0000.ethernet: device MAC address 3a:d3:7c:68:83:2e | ||
| + | [ 2.005813] imx-dwmac 30bf0000.ethernet: Enabled L3L4 Flow TC (entries=8) | ||
| + | [ 2.012612] imx-dwmac 30bf0000.ethernet: Enabled RFS Flow TC (entries=8) | ||
| + | [ 2.019328] imx-dwmac 30bf0000.ethernet: Enabling HW TC (entries=256, max_off=256) | ||
| + | [ 2.026908] imx-dwmac 30bf0000.ethernet: Using 34 bits DMA width | ||
| + | [ 2.038138] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | ||
| + | [ 2.043663] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 | ||
| + | [ 2.051669] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000002001010010 | ||
| + | [ 2.061118] xhci-hcd xhci-hcd.1.auto: irq 77, io mem 0x38200000 | ||
| + | [ 2.068011] hub 1-0:1.0: USB hub found | ||
| + | [ 2.071789] hub 1-0:1.0: 1 port detected | ||
| + | [ 2.075976] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | ||
| + | [ 2.081481] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 | ||
| + | [ 2.089155] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed | ||
| + | [ 2.095737] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | ||
| + | [ 2.104593] hub 2-0:1.0: USB hub found | ||
| + | [ 2.108379] hub 2-0:1.0: 1 port detected | ||
| + | [ 2.113322] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 5 mkt segment 0 supported-hw 0x20 0x1 | ||
| + | [ 2.124835] mxc-mipi-csi2-sam 32e40000.csi: supply mipi-phy not found, using dummy regulator | ||
| + | [ 2.125106] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO | ||
| + | [ 2.133656] : mipi_csis_imx8mp_phy_reset, No remote pad found! | ||
| + | [ 2.144245] mxc-mipi-csi2-sam 32e40000.csi: lanes: 2, hs_settle: 13, clk_settle: 2, wclk: 1, freq: 500000000 | ||
| + | [ 2.155213] mxc-mipi-csi2-sam 32e50000.csi: supply mipi-phy not found, using dummy regulator | ||
| + | [ 2.164019] : mipi_csis_imx8mp_phy_reset, No remote pad found! | ||
| + | [ 2.169921] mxc-mipi-csi2-sam 32e50000.csi: lanes: 2, hs_settle: 13, clk_settle: 2, wclk: 1, freq: 266000000 | ||
| + | [ 2.172629] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA | ||
| + | [ 2.181676] isi-capture 32e00000.isi:cap_device: deferring 32e00000.isi:cap_device device registration | ||
| + | [ 2.196978] mxc-isi 32e00000.isi: mxc_isi.0 registered successfully | ||
| + | [ 2.204912] isi-capture 32e02000.isi:cap_device: deferring 32e02000.isi:cap_device device registration | ||
| + | [ 2.214374] mxc-isi 32e02000.isi: mxc_isi.1 registered successfully | ||
| + | [ 2.223575] dwhdmi-imx 32fd8000.hdmi: Detected HDMI TX controller v2.13a with HDCP (samsung_dw_hdmi_phy2) | ||
| + | [ 2.227158] mmc1: host does not support reading read-only switch, assuming write-enable | ||
| + | [ 2.235103] dwhdmi-imx 32fd8000.hdmi: registered DesignWare HDMI I2C bus driver | ||
| + | [ 2.245092] mmc1: new high speed SDHC card at address aaaa | ||
| + | [ 2.252673] imx-drm display-subsystem: bound imx-lcdifv3-crtc.0 (ops lcdifv3_crtc_ops) | ||
| + | [ 2.255359] mmcblk1: mmc1:aaaa SA16G 14.8 GiB | ||
| + | [ 2.262033] imx-drm display-subsystem: bound 32fd8000.hdmi (ops dw_hdmi_imx_ops) | ||
| + | [ 2.270081] mmcblk1: p1 p2 p3 | ||
| + | [ 2.274337] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 | ||
| + | [ 2.284752] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes | ||
| + | [ 2.298449] isi-m2m 32e00000.isi:m2m_device: Register m2m success for ISI.0 | ||
| + | [ 2.305583] cfg80211: Loading compiled-in X.509 certificates for regulatory database | ||
| + | [ 2.316639] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | ||
| + | [ 2.317420] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA | ||
| + | [ 2.325914] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 | ||
| + | [ 2.338943] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db | ||
| + | [ 2.347091] ALSA device list: | ||
| + | [ 2.350072] No soundcards found. | ||
| + | [ 2.372674] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. | ||
| + | [ 2.382504] VFS: Mounted root (ext4 filesystem) readonly on device 179:99. | ||
| + | [ 2.398828] devtmpfs: mounted | ||
| + | [ 2.402506] Freeing unused kernel memory: 2944K | ||
| + | [ 2.407121] Run /sbin/init as init process | ||
| + | [ 2.551919] random: fast init done | ||
| + | [ 3.026354] systemd[1]: System time before build time, advancing clock. | ||
| + | [ 3.064706] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP + | ||
| + | LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) | ||
| + | [ 3.088550] systemd[1]: Detected architecture arm64. | ||
| + | |||
| + | Welcome to Debian GNU/Linux 11 (bullseye)! | ||
| + | |||
| + | [ 3.139998] systemd[1]: Set hostname to <uefi-arm64>. | ||
| + | [ 3.201880] Hot alarm is canceled. GPU3D clock will return to 64/64 | ||
| + | [ 3.609007] systemd[178]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. | ||
| + | [ 3.880648] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it di | ||
| + | sables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or ' | ||
| + | control-group'. Support for KillMode=none is deprecated and will eventually be removed. | ||
| + | [ 4.074251] systemd[1]: Queued start job for default target Graphical Interface. | ||
| + | [ 4.084321] random: systemd: uninitialized urandom read (16 bytes read) | ||
| + | [ 4.091166] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firew | ||
| + | alling. | ||
| + | [ 4.103793] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) | ||
| + | [ 4.114485] systemd[1]: Created slice system-modprobe.slice. | ||
| + | [ OK ] Created slice system-modprobe.slice. | ||
| + | [ 4.138251] random: systemd: uninitialized urandom read (16 bytes read) | ||
| + | [ 4.146036] systemd[1]: Created slice system-serial\x2dgetty.slice. | ||
| + | [ OK ] Created slice system-serial\x2dgetty.slice. | ||
| + | [ 4.170255] random: systemd: uninitialized urandom read (16 bytes read) | ||
| + | [ 4.177892] systemd[1]: Created slice User and Session Slice. | ||
| + | [ OK ] Created slice User and Session Slice. | ||
| + | [ 4.202520] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | ||
| + | [ OK ] Started Forward Password R…uests to Wall Directory Watch. | ||
| + | [ 4.226123] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. | ||
| + | [ 4.238098] systemd[1]: Reached target Remote File Systems. | ||
| + | [ OK ] Reached target Remote File Systems. | ||
| + | [ 4.262246] systemd[1]: Reached target Slices. | ||
| + | [ OK ] Reached target Slices. | ||
| + | [ 4.282260] systemd[1]: Reached target Swap. | ||
| + | [ OK ] Reached target Swap. | ||
| + | [ 4.302397] systemd[1]: Listening on Syslog Socket. | ||
| + | [ OK ] Listening on Syslog Socket. | ||
| + | [ 4.322655] systemd[1]: Listening on fsck to fsckd communication Socket. | ||
| + | [ OK ] Listening on fsck to fsckd communication Socket. | ||
| + | [ 4.346457] systemd[1]: Listening on initctl Compatibility Named Pipe. | ||
| + | [ OK ] Listening on initctl Compatibility Named Pipe. | ||
| + | [ 4.370839] systemd[1]: Listening on Journal Audit Socket. | ||
| + | [ OK ] Listening on Journal Audit Socket. | ||
| + | [ 4.383574] systemd[1]: Listening on Journal Socket (/dev/log). | ||
| + | [ OK ] Listening on Journal Socket (/dev/log). | ||
| + | [ 4.406754] systemd[1]: Listening on Journal Socket. | ||
| + | [ OK ] Listening on Journal Socket. | ||
| + | [ 4.434100] systemd[1]: Listening on udev Control Socket. | ||
| + | [ OK ] Listening on udev Control Socket. | ||
| + | [ 4.458673] systemd[1]: Listening on udev Kernel Socket. | ||
| + | [ OK ] Listening on udev Kernel Socket. | ||
| + | [ 4.485562] systemd[1]: Mounting Huge Pages File System... | ||
| + | Mounting Huge Pages File System... | ||
| + | [ 4.508830] systemd[1]: Mounting POSIX Message Queue File System... | ||
| + | Mounting POSIX Message Queue File System... | ||
| + | [ 4.532797] systemd[1]: Mounting Kernel Debug File System... | ||
| + | Mounting Kernel Debug File System... | ||
| + | [ 4.550883] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. | ||
| + | [ 4.569735] systemd[1]: Starting Restore / save the current clock... | ||
| + | Starting Restore / save the current clock... | ||
| + | [ 4.593660] systemd[1]: Starting Set the console keyboard layout... | ||
| + | Starting Set the console keyboard layout... | ||
| + | [ 4.614380] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. | ||
| + | [ 4.629117] systemd[1]: Starting Load Kernel Module configfs... | ||
| + | Starting Load Kernel Module configfs... | ||
| + | [ 4.653138] systemd[1]: Starting Load Kernel Module drm... | ||
| + | Starting Load Kernel Module drm... | ||
| + | [ 4.673290] systemd[1]: Starting Load Kernel Module fuse... | ||
| + | Starting Load Kernel Module fuse... | ||
| + | [ 4.696967] systemd[1]: Started Nameserver information manager. | ||
| + | [ OK ] Started Nameserver information manager. | ||
| + | [ 4.718364] systemd[1]: Reached target Network (Pre). | ||
| + | [ OK ] Reached target Network (Pre). | ||
| + | [ 4.740455] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. | ||
| + | [ 4.752435] systemd[1]: Starting File System Check on Root Device... | ||
| + | Starting File System Check on Root Device... | ||
| + | [ 4.780826] systemd[1]: Starting Load Kernel Modules... | ||
| + | Starting Load Kernel Modules... | ||
| + | [ 4.789397] systemd[1]: Starting Coldplug All udev Devices... | ||
| + | Starting Coldplug All udev Devices... | ||
| + | [ 4.802600] systemd[1]: Mounted Huge Pages File System. | ||
| + | [ OK ] Mounted 4.808509] systemd[1]: Mounted POSIX Message Queue File System. | ||
| + | ;39mHuge Pages File System. | ||
| + | [ 4.817509] systemd[1]: Mounted Kernel Debug File System. | ||
| + | [ OK ] Mounted 4.826614] systemd[1]: Finished Restore / save the current clock. | ||
| + | ;39mPOSIX Message Queue File Syst[ 4.835477] systemd[1]: modprobe@configfs.service: Succeeded. | ||
| + | em. | ||
| + | [ OK ] Moun[ 4.843716] systemd[1]: Finished Load Kernel Module configfs. | ||
| + | ted Kernel Debug File Sy[ 4.852727] systemd[1]: modprobe@drm.service: Succeeded. | ||
| + | stem. | ||
| + | [ OK ] Fi[ 4.860517] systemd[1]: Finished Load Kernel Module drm. | ||
| + | nished Restore / save th[ 4.868992] systemd[1]: modprobe@fuse.service: Succeeded. | ||
| + | e current clock. | ||
| + | [ O[ 4.876953] systemd[1]: Finished Load Kernel Module fuse. | ||
| + | K ] Finished Load Kernel Module configfs. | ||
| + | [ 4.887084] systemd[1]: Finished Load Kernel Modules. | ||
| + | 0;32m OK ] Finished 4.896628] systemd[1]: Condition check resulted in FUSE Control File System being skipped. | ||
| + | 9mLoad Kernel Module drm. | ||
| + | [ OK ] Finished 4.909507] systemd[1]: Mounting Kernel Configuration File System... | ||
| + | 1;39mLoad Kernel Module fuse. | ||
| + | [ OK ] Finished [ 4.921091] systemd[1]: Started File System Check Daemon to report status. | ||
| + | Load Kernel Modules. | ||
| + | Mounting Ke[ 4.933844] systemd[1]: Starting Apply Kernel Variables... | ||
| + | rnel Configuration File System... | ||
| + | [ OK ] Start[ 4.945273] systemd[1]: Finished Set the console keyboard layout. | ||
| + | ed File System Check Dae[ 4.954257] systemd[1]: Mounted Kernel Configuration File System. | ||
| + | mon to report status. | ||
| + | Starting Apply Kernel Variables... | ||
| + | [ OK ] Finished Set the console keyboard layout. | ||
| + | [ OK ] Mounted Kernel Configuration File System. | ||
| + | [ 5.007387] systemd[1]: Finished File System Check on Root Device. | ||
| + | [ OK ] Finished File System Check on Root Device. | ||
| + | [ 5.031370] systemd[1]: Finished Apply Kernel Variables. | ||
| + | [ OK ] Finished Apply Kernel Variables. | ||
| + | [ 5.057614] systemd[1]: Starting Remount Root and Kernel File Systems... | ||
| + | Starting Remount Root and Kernel File Systems... | ||
| + | [ 5.256231] EXT4-fs (mmcblk1p3): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none. | ||
| + | [ 5.269736] systemd[1]: Finished Remount Root and Kernel File Systems. | ||
| + | [ OK ] Finished Remount Root and Kernel File Systems. | ||
| + | [ 5.300724] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. | ||
| + | [ 5.309390] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. | ||
| + | [ 5.321700] systemd[1]: Starting Load/Save Random Seed... | ||
| + | Starting Load/Save Random Seed... | ||
| + | [ 5.344978] systemd[1]: Starting Create System Users... | ||
| + | Starting Create System Users... | ||
| + | [ 5.396537] systemd[1]: Finished Create System Users. | ||
| + | [ OK ] Finished Create System Users. | ||
| + | [ 5.416013] systemd[1]: Finished Coldplug All udev Devices. | ||
| + | [ OK ] Finished Coldplug All udev Devices. | ||
| + | [ 5.443231] systemd[1]: Starting Helper to synchronize boot up for ifupdown... | ||
| + | Starting Helper to synchronize boot up for ifupdown... | ||
| + | [ 5.468965] systemd[1]: Starting Create Static Device Nodes in /dev... | ||
| + | Starting Create Static Device Nodes in /dev... | ||
| + | [ 5.514321] systemd[1]: Finished Create Static Device Nodes in /dev. | ||
| + | [ OK ] Finished Create Static Device Nodes in /dev. | ||
| + | [ 5.542593] systemd[1]: Reached target Local File Systems (Pre). | ||
| + | [ OK ] Reached target Local File Systems (Pre). | ||
| + | [ 5.570962] systemd[1]: Mounting /tmp... | ||
| + | Mounting /tmp... | ||
| + | [ 5.593042] systemd[1]: Starting Rule-based Manager for Device Events and Files... | ||
| + | Starting Rule-based Manage…for Device Events and Files... | ||
| + | [ 5.620259] systemd[1]: Mounted /tmp. | ||
| + | [ OK ] Mounted /tmp. | ||
| + | [ 5.638377] systemd[1]: Reached target Local File Systems. | ||
| + | [ OK ] Reached target Local File Systems. | ||
| + | [ 5.664910] systemd[1]: Starting Armbian leds state... | ||
| + | Starting Armbian leds state... | ||
| + | [ 5.685146] systemd[1]: Starting Armbian ZRAM config... | ||
| + | Starting Armbian ZRAM config... | ||
| + | [ 5.704707] systemd[1]: Starting Set console font and keymap... | ||
| + | Starting Set console font and keymap... | ||
| + | [ 5.724808] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... | ||
| + | Starting Tell Plymouth To Write Out Runtime Data... | ||
| + | [ 5.747410] systemd[1]: Finished Set console font and keymap. | ||
| + | [ OK ] Finished Set console font and keymap. | ||
| + | [ 5.771579] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. | ||
| + | [ OK ] Finished Tell Plymouth To Write Out Runtime Data. | ||
| + | [ 5.794462] systemd[1]: Started Rule-based Manager for Device Events and Files. | ||
| + | [ OK ] Started Rule-based Manager for Device Events and Files. | ||
| + | [ 5.819462] systemd[1]: Finished Armbian leds state. | ||
| + | [ OK ] Finished Armbian leds state. | ||
| + | [ 5.841045] systemd[1]: Starting Show Plymouth Boot Screen... | ||
| + | Starting Show Plymouth Boot Screen... | ||
| + | [ 5.885988] systemd[1]: Received SIGRTMIN+20 from PID 267 (plymouthd). | ||
| + | [ 5.915469] systemd[1]: Started Show Plymouth Boot Screen. | ||
| + | [ OK ] Started 5.922352] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsp | ||
| + | lash is active being skipped. | ||
| + | ;39mShow Plymouth Boot Screen[ 5.938359] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. | ||
| + | . | ||
| + | [ OK ] Started 5.949356] systemd[1]: Reached target Local Encrypted Volumes. | ||
| + | ;39mForward Password R…s to Ply[ 5.959551] systemd[1]: Reached target Paths. | ||
| + | mouth Directory Watch. | ||
| + | [ OK ] Reached target Local Encrypted Volumes. | ||
| + | [ OK ] Reached target Paths. | ||
| + | [ 6.026527] systemd[1]: armbian-zram-config.service: Main process exited, code=exited, status=1/FAILURE | ||
| + | [ 6.036769] systemd[1]: armbian-zram-config.service: Failed with result 'exit-code'. | ||
| + | [ 6.045780] systemd[1]: Failed to start Armbian ZRAM config. | ||
| + | [FAILED] Failed to start Armbian ZRAM conf[ 6.055314] systemd[1]: Starting Armbian memory supported logging... | ||
| + | ig. | ||
| + | See 'systemctl status armbian-zram-config.service' for details. | ||
| + | Starting Armbian memory supported logging... | ||
| + | [ 6.265405] systemd[1]: Found device /dev/ttymxc1. | ||
| + | [ 6.270606] cfg80211: failed to load regulatory.db | ||
| + | [ OK ] Found device /dev/ttymxc1. | ||
| + | [ 6.421201] imx-sdma 30e10000.dma-controller: firmware found. | ||
| + | [ 6.421201] imx-sdma 30bd0000.dma-controller: firmware found. | ||
| + | [ 6.421372] imx-sdma 30bd0000.dma-controller: loaded firmware 4.5 | ||
| + | [ 7.001399] systemd[1]: Finished Helper to synchronize boot up for ifupdown. | ||
| + | [ OK ] Finished 7.011956] systemd[1]: Starting Raise network interfaces... | ||
| + | 1;39mHelper to synchronize boot up for ifupdown. | ||
| + | Starting Raise network interfaces... | ||
| + | [ 7.225419] Generic PHY 30be0000.ethernet-1:08: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:08, irq=POLL) | ||
| + | [ 7.310724] systemd[1]: Finished Raise network interfaces. | ||
| + | [ OK ] Finished Raise network interfaces. | ||
| + | [ 7.613835] random: crng init done | ||
| + | [ 7.617252] random: 7 urandom warning(s) missed due to ratelimiting | ||
| + | [ 7.648331] systemd[1]: Finished Load/Save Random Seed. | ||
| + | [ OK ] Finished 7.654340] systemd[1]: Condition check resulted in First Boot Complete being skipped. | ||
| + | [ 7.664986] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. | ||
| − | + | [ 7.677519] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. | |
| − | + | [ 8.607137] systemd[1]: Finished Armbian memory supported logging. | |
| − | + | [ OK ] Finished Armbian memory supported l[ 8.616777] systemd[1]: Starting Journal Service... | |
| − | + | ogging. | |
| − | + | Starting Journal Service... | |
| + | [ 8.813254] systemd[1]: Started Journal Service. | ||
| + | [ OK ] Started Journal Service. | ||
| + | Starting Flush Journal to Persistent Storage... | ||
| + | [ 8.851136] systemd-journald[422]: Received client request to flush runtime journal. | ||
| + | [ OK ] Finished Flush Journal to Persistent Storage. | ||
| + | Starting Create Volatile Files and Directories... | ||
| + | [ OK ] Finished Create Volatile Files and Directories. | ||
| + | [ OK ] Started Entropy Daemon based on the HAVEGE algorithm. | ||
| + | Starting Update UTMP about System Boot/Shutdown... | ||
| + | [ OK ] Finished Update UTMP about System Boot/Shutdown. | ||
| + | [ OK ] Reached target System Initialization. | ||
| + | [ OK ] Started Daily apt download activities. | ||
| + | [ OK ] Started Daily apt upgrade and clean activities. | ||
| + | [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. | ||
| + | [ OK ] Started Discard unused blocks once a week. | ||
| + | [ OK ] Started Daily rotation of log files. | ||
| + | [ OK ] Started Clean PHP session files every 30 mins. | ||
| + | [ OK ] Started Run system activit…ounting tool every 10 minutes. | ||
| + | [ OK ] Started Generate summary o…esterday's process accounting. | ||
| + | [ OK ] Started Daily Cleanup of Temporary Directories. | ||
| + | [ OK ] Reached target Timers. | ||
| + | [ OK ] Listening on D-Bus System Message Bus Socket. | ||
| + | [ OK ] Reached target Sockets. | ||
| + | Starting Armbian hardware monitoring... | ||
| + | Starting Armbian hardware optimization... | ||
| + | [ OK ] Finished Armbian hardware monitoring. | ||
| + | [ OK ] Finished Armbian hardware optimization. | ||
| + | [ OK ] Reached target Basic System. | ||
| + | [ OK ] Started Armbian first run tasks. | ||
| + | [ OK ] Created slice system-getty.slice. | ||
| + | [ OK ] Started Regular background program processing daemon. | ||
| + | [ OK ] Started D-Bus System Message Bus. | ||
| + | Starting Remove Stale Onli…t4 Metadata Check Snapshots... | ||
| + | Starting LSB: Load kernel …d to enable cpufreq scaling... | ||
| + | Starting System Logging Service... | ||
| + | Starting Resets System Activity Logs... | ||
| + | Starting User Login Management... | ||
| + | Starting WPA supplicant... | ||
| + | [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. | ||
| + | [ 9.283020] fec 30be0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx | ||
| + | [ 9.291303] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | ||
| + | [ OK ] Finished Resets System Activity Logs. | ||
| + | [ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling. | ||
| + | Starting LSB: set CPUFreq kernel parameters... | ||
| + | [ OK ] Started System Logging Service. | ||
| + | [ OK ] Started LSB: set CPUFreq kernel parameters. | ||
| + | Starting LSB: Set sysfs variables from /etc/sysfs.conf... | ||
| + | [ OK ] Started User Login Management. | ||
| + | [ OK ] Started WPA supplicant. | ||
| + | [ OK ] Reached target Network. | ||
| + | [ OK ] Reached target Network is Online. | ||
| + | Starting LSB: Advanced IEEE 802.11 management daemon... | ||
| + | Starting Network Time Service... | ||
| + | Starting OpenVPN service... | ||
| + | Starting /etc/rc.local Compatibility... | ||
| + | Starting OpenBSD Secure Shell server... | ||
| + | Starting Permit User Sessions... | ||
| + | [ 9.710449] systemd-journald[422]: Received client request to relinquish /var/log/journal/9d4683f3346a494aa37ca5176b1495aa access. | ||
| + | [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. | ||
| + | [ OK ] Finished OpenVPN service. | ||
| + | [ OK ] Started /etc/rc.local Compatibility. | ||
| + | [ OK ] Finished Permit User Sessions. | ||
| + | Starting Hold until boot process finishes up... | ||
| + | Starting Terminate Plymouth Boot Screen... | ||
| − | + | Armbian 22.11.1 Bullseye ttymxc1 | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | uefi-arm64 login: [ 21.520671] systemd-journald[422]: Received client request to flush runtime journal. | |
| − | + | [ 21.589388] systemd-journald[422]: Received client request to relinquish /var/log/journal/9d4683f3346a494aa37ca5176b1495aa access. | |
| − | |||
| − | + | uefi-arm64 login: root | |
| + | Password: | ||
| + | _ _ _____ _____ ___ __ _ _ | ||
| + | | | | | ____| ___|_ _| __ _ _ __ _ __ ___ / /_ | || | | ||
| + | | | | | _| | |_ | | / _` | '__| '_ ` _ \| '_ \| || |_ | ||
| + | | |_| | |___| _| | | | (_| | | | | | | | | (_) |__ _| | ||
| + | \___/|_____|_| |___| \__,_|_| |_| |_| |_|\___/ |_| | ||
| + | |||
| + | Welcome to Armbian 22.11.4 Bullseye with Linux 5.15.32-00007-gfe10aa07dfca-dirty | ||
| + | |||
| + | System load: 21% Up time: 1 min | ||
| + | Memory usage: 6% of 5.47G IP: 192.168.0.81 | ||
| + | CPU temp: 47°C Usage of /: 41% of 9.2G | ||
| + | |||
| + | [ Menu-driven system configuration (beta): sudo apt update && sudo apt install armbian-config ] | ||
| + | |||
| + | root@uefi-arm64:~# | ||
Revision as of 12:55, 31 January 2023
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Contents
History[edit | edit source]
| Version | Date | Notes |
|---|---|---|
| 1.0.0 | January 2023 | First public release |
Introduction[edit | edit source]
Testbed[edit | edit source]
Building and deploying the root file system onto the target[edit | edit source]
unzx Armbian_22.11.1_Uefi-arm64_bullseye_current_5.15.80_minimal.img.xz
$ fdisk -l ./Armbian_22.11.1_Uefi-arm64_bullseye_current_5.15.80_minimal.img Disk ./Armbian_22.11.1_Uefi-arm64_bullseye_current_5.15.80_minimal.img: 3,45 GiB, 3690987520 bytes, 7208960 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: DA7CB2A5-40D2-374F-998C-5C601A83CF12
Device Start End Sectors Size Type ./Armbian_22.11.1_Uefi-arm64_bullseye_current_5.15.80_minimal.img1 8192 532479 524288 256M EFI ./Armbian_22.11.1_Uefi-arm64_bullseye_current_5.15.80_minimal.img2 532480 7208926 6676447 3,2G Linu
$ sudo mount -o loop,offset=272629760 Armbian_22.11.1_Uefi-arm64_bullseye_current_5.15.80_minimal.img /mnt/tmp/
$ sudo cp -aRv * /media/amarson/debian/ 'armbian.key' -> '/media/amarson/debian/armbian.key' 'bin' -> '/media/amarson/debian/bin' 'boot' -> '/media/amarson/debian/boot' ...
root@uefi-arm64:~# cat /etc/fstab UUID=41eabd71-ef7f-4a75-94a0-3a55dbacbaea / ext4 defaults,noatime,commit=600,errors=remount-ro 0 1
- UUID=7EEE-611C /boot/efi vfat defaults 0 2
tmpfs /tmp tmpfs defaults,nosuid 0 0
Bootstrap process[edit | edit source]
U-Boot SPL 2020.04-desk-mx8m-l-2.0.0-rc2+fslc+g32087d457a (Dec 20 2022 - 15:01:10 +0000) SOM ConfigID not found, using default SOM ConfigID#: ffffffff DDRINFO: start DRAM init DDRINFO: DRAM rate 4000MTS DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-0-g2a2678646 NOTICE: BL31: Built : 22:11:34, Dec 15 2021
U-Boot 2020.04-desk-mx8m-l-2.0.0-rc2+fslc+g32087d457a (Dec 20 2022 - 15:01:10 +0000)
CPU: i.MX8MP[8] rev1.1 1800 MHz (running at 1200 MHz) CPU: Commercial temperature grade (0C to 95C) at 46C Reset cause: POR Model: DAVE i.MX8MPlus on SBC ORCA Rev A DRAM: 6 GiB TCPC: Vendor ID [0x1fc9], Product ID [0x5110], Addr [I2C2 0x50] tcpc_init: Can't find device id=0x3d MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK Fail to setup video link In: serial Out: serial Err: serial
BuildInfo: - ATF 2a26786 - U-Boot 2020.04-desk-mx8m-l-2.0.0-rc2+fslc+g32087d457a
SOM ConfigID not found, using default SOM ConfigID#: ffffffff SOM UniqueID#: 0002aaff:a32f16cc CB ConfigID#: 00001001 CB UniqueID#: 00000000:00000000 SOM ConfigID not found, using default SOM: Unknown on SBC ORCA switch to partitions #0, OK mmc1 is current device flash target is MMC:1 Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 5e:83:9d:9b:04:e4 eth0: ethernet@30be0000 Fastboot: Normal Normal Boot Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device 1084 bytes read in 13 ms (81.1 KiB/s) Running bootscript from mmc ...
- Executing script at 40480000
bootscript generated with command "mkimage -A ARM -T script -C none -n DESK-MX8M -d bootscript.txt boot.scr" Booting DESK-MX8M via mmcboot with imx8mp-mito8mplus-cb1001.dtb as device tree 30931456 bytes read in 1325 ms (22.3 MiB/s) 59285 bytes read in 19 ms (3 MiB/s)
- Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000 Using Device Tree in place at 0000000043000000, end 0000000043011794
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.15.32-00007-gfe10aa07dfca-dirty (rborsellino@bionicbakery) (aarch64-poky-linux-gcc (GCC) 11.2.0, GNU ld ( GNU Binutils) 2.38.20220313) #2 SMP PREEMPT Wed Oct 26 08:58:42 CEST 2022 [ 0.000000] Machine model: i.MX8MPlus Mito8MPlus on SBC Orca [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x0000000030890000 (options '115200') [ 0.000000] printk: bootconsole [ec_imx6q0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000c4000000, size 960 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000094300000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vdev0buffer@94300000, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000001bfffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x1bf44f800-0x1bf451fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000001bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000557fffff] [ 0.000000] node 0: [mem 0x0000000055800000-0x0000000055ffffff] [ 0.000000] node 0: [mem 0x0000000058000000-0x00000000923fffff] [ 0.000000] node 0: [mem 0x0000000092400000-0x00000000a43fffff] [ 0.000000] node 0: [mem 0x00000000a4400000-0x00000001bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000001bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 20 pages/cpu s41176 r8192 d32552 u81920 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1540096 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200 root=/dev/mmcblk1p3 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000c0000000-0x00000000c4000000] (64MB) [ 0.000000] Memory: 4752512K/6258688K available (18560K kernel code, 1534K rwdata, 7072K rodata, 2944K init, 541K bss, 523136K reserv ed, 983040K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 160 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000 [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] random: get_random_bytes called from start_kernel+0x474/0x660 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns [ 0.000000] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns [ 0.008452] Console: colour dummy device 80x25 [ 0.012574] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000) [ 0.022841] pid_max: default: 32768 minimum: 301 [ 0.027528] LSM: Security Framework initializing [ 0.032172] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.039749] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.048941] rcu: Hierarchical SRCU implementation. [ 0.053747] EFI services will not be available. [ 0.057332] smp: Bringing up secondary CPUs ... [ 0.062081] Detected VIPT I-cache on CPU1 [ 0.062105] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000 [ 0.062140] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.062560] Detected VIPT I-cache on CPU2 [ 0.062578] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000 [ 0.062597] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.062991] Detected VIPT I-cache on CPU3 [ 0.063010] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000 [ 0.063030] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.063094] smp: Brought up 1 node, 4 CPUs [ 0.118314] SMP: Total of 4 processors activated. [ 0.123031] CPU features: detected: 32-bit EL0 Support [ 0.128207] CPU features: detected: 32-bit EL1 Support [ 0.133356] CPU features: detected: CRC32 instructions [ 0.145828] CPU: All CPU(s) started at EL2 [ 0.147109] alternatives: patching kernel code [ 0.153158] devtmpfs: initialized [ 0.162466] KASLR disabled due to lack of seed [ 0.164216] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.173882] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.216102] pinctrl core: initialized pinctrl subsystem [ 0.219000] DMI not present or invalid. [ 0.222712] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.233145] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.237940] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.245899] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.253486] audit: initializing netlink subsys (disabled) [ 0.258998] audit: type=2000 audit(0.200:1): state=initialized audit_enabled=0 res=1 [ 0.259544] thermal_sys: Registered thermal governor 'step_wise' [ 0.266619] thermal_sys: Registered thermal governor 'power_allocator' [ 0.272925] cpuidle: using governor menu [ 0.283320] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.290054] ASID allocator initialised with 65536 entries [ 0.296378] Serial: AMBA PL011 UART driver [ 0.299571] imx mu driver is registered. [ 0.303459] imx rpmsg driver is registered. [ 0.318256] imx8mp-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver [ 0.337368] platform 32fd8000.hdmi: Fixing up cyclic dependency with 32fc6000.lcd-controller [ 0.364575] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.368469] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.375237] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.381933] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.389686] cryptd: max_cpu_qlen set to 1000 [ 0.395774] ACPI: Interpreter disabled. [ 0.397530] iommu: Default domain type: Translated [ 0.401712] iommu: DMA domain TLB invalidation policy: strict mode [ 0.408174] vgaarb: loaded [ 0.410978] SCSI subsystem initialized [ 0.414794] usbcore: registered new interface driver usbfs [ 0.420033] usbcore: registered new interface driver hub [ 0.425353] usbcore: registered new device driver usb [ 0.431353] mc: Linux media interface: v0.10 [ 0.434717] videodev: Linux video capture interface: v2.00 [ 0.440277] pps_core: LinuxPPS API ver. 1 registered [ 0.445194] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.454401] PTP clock support registered [ 0.458498] EDAC MC: Ver: 3.0.0 [ 0.462556] FPGA manager framework [ 0.464955] Advanced Linux Sound Architecture Driver Initialized. [ 0.471511] Bluetooth: Core ver 2.22 [ 0.474609] NET: Registered PF_BLUETOOTH protocol family [ 0.479935] Bluetooth: HCI device and connection manager initialized [ 0.486324] Bluetooth: HCI socket layer initialized [ 0.491221] Bluetooth: L2CAP socket layer initialized [ 0.496303] Bluetooth: SCO socket layer initialized [ 0.501797] clocksource: Switched to clocksource arch_sys_counter [ 0.507469] VFS: Disk quotas dquot_6.6.0 [ 0.511302] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.518318] pnp: PnP ACPI: disabled [ 0.527865] NET: Registered PF_INET protocol family [ 0.530114] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.540407] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.546229] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.554489] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.562451] TCP: Hash tables configured (established 65536 bind 65536) [ 0.568221] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.575051] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.582411] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.588218] RPC: Registered named UNIX socket transport module. [ 0.593819] RPC: Registered udp transport module. [ 0.598553] RPC: Registered tcp transport module. [ 0.603264] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.610422] PCI: CLS 0 bytes, default 64 [ 0.614329] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.622618] kvm [1]: IPA Size Limit: 40 bits [ 0.627805] kvm [1]: GICv3: no GICV resource entry [ 0.631003] kvm [1]: disabling GICv2 emulation [ 0.635467] kvm [1]: GIC system register CPU interface enabled [ 0.641398] kvm [1]: vgic interrupt IRQ9 [ 0.645379] kvm [1]: Hyp mode initialized successfully [ 0.653435] Initialise system trusted keyrings [ 0.655159] workingset: timestamp_bits=42 max_order=21 bucket_order=0 [ 0.667445] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.671002] NFS: Registering the id_resolver key type [ 0.675546] Key type id_resolver registered [ 0.679725] Key type id_legacy registered [ 0.683818] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.690488] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.697943] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.704373] 9p: Installing v9fs 9p2000 file system support [ 0.744904] Key type asymmetric registered [ 0.746156] Asymmetric key parser 'x509' registered [ 0.751099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.758491] io scheduler mq-deadline registered [ 0.763040] io scheduler kyber registered [ 0.773725] EINJ: ACPI disabled. [ 0.784543] imx-sdma 30bd0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2 [ 0.787457] mxs-dma 33000000.dma-apbh: initialized [ 0.792209] imx-sdma 30bd0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin [ 0.798661] SoC: i.MX8MP revision 1.1 [ 0.810800] Bus freq driver module loaded [ 0.820322] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.825997] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 31, base_baud = 5000000) is a IMX [ 0.833120] 30880000.serial: ttymxc2 at MMIO 0x30880000 (irq = 32, base_baud = 5000000) is a IMX [ 0.841867] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 33, base_baud = 1500000) is a IMX [ 0.850339] printk: console [ttymxc1] enabled [ 0.850339] printk: console [ttymxc1] enabled [ 0.858975] printk: bootconsole [ec_imx6q0] disabled [ 0.858975] printk: bootconsole [ec_imx6q0] disabled [ 0.882487] loop: module loaded [ 0.887025] megasas: 07.717.02.00-rc1 [ 0.892265] imx ahci driver is registered. [ 0.901941] tun: Universal TUN/TAP device driver, 1.6 [ 0.907894] thunder_xcv, ver 1.0 [ 0.911167] thunder_bgx, ver 1.0 [ 0.914436] nicpf, ver 1.0 [ 0.919391] hclge is initializing [ 0.922730] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.929960] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.935325] e1000: Intel(R) PRO/1000 Network Driver [ 0.940209] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.945999] e1000e: Intel(R) PRO/1000 Network Driver [ 0.950969] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.956928] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.962336] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.967941] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.974221] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.980333] sky2: driver version 1.30 [ 0.984635] usbcore: registered new interface driver r8152 [ 0.990349] VFIO - User Level meta-driver version: 0.3 [ 1.000832] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.007439] ehci-pci: EHCI PCI platform driver [ 1.011937] ehci-platform: EHCI generic platform driver [ 1.017383] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.023597] ohci-pci: OHCI PCI platform driver [ 1.028085] ohci-platform: OHCI generic platform driver [ 1.034134] usbcore: registered new interface driver uas [ 1.039500] usbcore: registered new interface driver usb-storage [ 1.045574] usbcore: registered new interface driver usbserial_generic [ 1.052128] usbserial: USB Serial support registered for generic [ 1.058168] usbcore: registered new interface driver ftdi_sio [ 1.063937] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.071283] usbcore: registered new interface driver usb_serial_simple [ 1.077836] usbserial: USB Serial support registered for carelink [ 1.083946] usbserial: USB Serial support registered for zio [ 1.089631] usbserial: USB Serial support registered for funsoft [ 1.095662] usbserial: USB Serial support registered for flashloader [ 1.102047] usbserial: USB Serial support registered for google [ 1.107990] usbserial: USB Serial support registered for libtransistor [ 1.114539] usbserial: USB Serial support registered for vivopay [ 1.120566] usbserial: USB Serial support registered for moto_modem [ 1.126858] usbserial: USB Serial support registered for motorola_tetra [ 1.133491] usbserial: USB Serial support registered for novatel_gps [ 1.139866] usbserial: USB Serial support registered for hp4x [ 1.145637] usbserial: USB Serial support registered for suunto [ 1.151580] usbserial: USB Serial support registered for siemens_mpi [ 1.157969] usbcore: registered new interface driver usb_ehset_test [ 1.168257] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0 [ 1.174480] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:09:45 UTC (585) [ 1.183850] i2c_dev: i2c /dev entries driver [ 1.192344] Bluetooth: HCI UART driver ver 2.3 [ 1.196819] Bluetooth: HCI UART protocol H4 registered [ 1.201970] Bluetooth: HCI UART protocol BCSP registered [ 1.207304] Bluetooth: HCI UART protocol LL registered [ 1.212449] Bluetooth: HCI UART protocol ATH3K registered [ 1.217873] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 1.224247] Bluetooth: HCI UART protocol Broadcom registered [ 1.229943] Bluetooth: HCI UART protocol QCA registered [ 1.235393] EDAC MC: ECC not enabled [ 1.240412] sdhci: Secure Digital Host Controller Interface driver [ 1.246615] sdhci: Copyright(c) Pierre Ossman [ 1.251717] Synopsys Designware Multimedia Card Interface Driver [ 1.258476] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.266312] ledtrig-cpu: registered to indicate activity on CPUs [ 1.273834] usbcore: registered new interface driver usbhid [ 1.279425] usbhid: USB HID core driver [ 1.287730] cs_system_cfg: CoreSight Configuration manager initialised [ 1.296034] optee: probing for conduit method. [ 1.297209] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA [ 1.300507] optee: revision 3.10 (a991c904) [ 1.301262] optee: dynamic shared memory is enabled [ 1.316954] optee: initialized driver [ 1.323636] Galcore version 6.4.3.p4.398061 [ 1.386570] mmc2: new HS400 Enhanced strobe MMC card at address 0001 [ 1.394329] mmcblk2: mmc2:0001 DG4008 7.28 GiB [ 1.401873] mmcblk2: p1 p2 [ 1.406410] mmcblk2boot0: mmc2:0001 DG4008 4.00 MiB [ 1.413160] mmcblk2boot1: mmc2:0001 DG4008 4.00 MiB [ 1.419986] mmcblk2rpmb: mmc2:0001 DG4008 4.00 MiB, chardev (234:0) [ 1.441381] [drm] Initialized vivante 1.0.0 20170808 for 40000000.mix_gpu_ml on minor 0 [ 1.451090] hantrodec 0 : module inserted. Major = 511 [ 1.456704] hantrodec 1 : module inserted. Major = 511 [ 1.463267] hantroenc: HW at base <0000000038320000> with ID <0x80006200> [ 1.470198] hx280enc: module inserted. Major <510> [ 1.478003] NET: Registered PF_LLC protocol family [ 1.483307] NET: Registered PF_INET6 protocol family [ 1.490180] Segment Routing with IPv6 [ 1.493878] In-situ OAM (IOAM) with IPv6 [ 1.497850] NET: Registered PF_PACKET protocol family [ 1.503607] Bluetooth: RFCOMM TTY layer initialized [ 1.508507] Bluetooth: RFCOMM socket layer initialized [ 1.513682] Bluetooth: RFCOMM ver 1.11 [ 1.517452] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.522770] Bluetooth: BNEP filters: protocol multicast [ 1.528014] Bluetooth: BNEP socket layer initialized [ 1.532983] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.538918] Bluetooth: HIDP socket layer initialized [ 1.544578] 8021q: 802.1Q VLAN Support v1.8 [ 1.548798] lib80211: common routines for IEEE802.11 drivers [ 1.554571] 9pnet: Installing 9P2000 support [ 1.558883] tsn generic netlink module v1 init... [ 1.563656] Key type dns_resolver registered [ 1.568791] Loading compiled-in X.509 certificates [ 1.598302] regulator-se050-en GPIO handle specifies active low - ignored [ 1.605616] reg-fixed-voltage regulator-csi-en: nonexclusive access to GPIO for regulator-csi-en [ 1.775644] i2c i2c-0: IMX I2C adapter registered [ 1.781288] i2c 1-003c: Fixing up cyclic dependency with 32e40000.csi [ 1.788025] ov5640 1-003c: supply DOVDD not found, using dummy regulator [ 1.794839] ov5640 1-003c: supply AVDD not found, using dummy regulator [ 1.801498] ov5640 1-003c: supply DVDD not found, using dummy regulator [ 1.809529] ov5640 1-003c: ov5640_read_reg: error: reg=300a [ 1.815131] ov5640 1-003c: ov5640_check_chip_id: failed to read chip identifier [ 1.822707] i2c i2c-1: IMX I2C adapter registered [ 1.828562] i2c 2-003c: Fixing up cyclic dependency with 32e50000.csi [ 1.835305] ov5640 2-003c: supply DOVDD not found, using dummy regulator [ 1.842117] ov5640 2-003c: supply AVDD not found, using dummy regulator [ 1.848775] ov5640 2-003c: supply DVDD not found, using dummy regulator [ 1.856340] ov5640 2-003c: ov5640_read_reg: error: reg=300a [ 1.861948] ov5640 2-003c: ov5640_check_chip_id: failed to read chip identifier [ 1.869506] i2c i2c-2: IMX I2C adapter registered [ 1.875170] i2c i2c-5: IMX I2C adapter registered [ 1.880239] imx8mq-usb-phy 381f0040.usb-phy: supply vbus not found, using dummy regulator [ 1.888739] imx8mq-usb-phy 382f0040.usb-phy: supply vbus not found, using dummy regulator [ 1.898999] imx6q-pcie 33800000.pcie: supply epdev_on not found, using dummy regulator [ 1.907074] imx6q-pcie 33800000.pcie: error -ENOENT: pcie_phy clock source missing or invalid [ 1.915711] imx6q-pcie: probe of 33800000.pcie failed with error -2 [ 1.926822] pps pps0: new PPS source ptp0 [ 1.938742] fec 30be0000.ethernet eth0: registered PHC device 0 [ 1.945510] imx-dwmac 30bf0000.ethernet: IRQ eth_lpi not found [ 1.952246] imx-dwmac 30bf0000.ethernet: User ID: 0x10, Synopsys ID: 0x51 [ 1.959054] imx-dwmac 30bf0000.ethernet: DWMAC4/5 [ 1.963855] imx-dwmac 30bf0000.ethernet: DMA HW capability register supported [ 1.970994] imx-dwmac 30bf0000.ethernet: RX Checksum Offload Engine supported [ 1.978135] imx-dwmac 30bf0000.ethernet: TX Checksum insertion supported [ 1.984840] imx-dwmac 30bf0000.ethernet: Wake-Up On Lan supported [ 1.990991] imx-dwmac 30bf0000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 1.998661] imx-dwmac 30bf0000.ethernet: device MAC address 3a:d3:7c:68:83:2e [ 2.005813] imx-dwmac 30bf0000.ethernet: Enabled L3L4 Flow TC (entries=8) [ 2.012612] imx-dwmac 30bf0000.ethernet: Enabled RFS Flow TC (entries=8) [ 2.019328] imx-dwmac 30bf0000.ethernet: Enabling HW TC (entries=256, max_off=256) [ 2.026908] imx-dwmac 30bf0000.ethernet: Using 34 bits DMA width [ 2.038138] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 2.043663] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 2.051669] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000002001010010 [ 2.061118] xhci-hcd xhci-hcd.1.auto: irq 77, io mem 0x38200000 [ 2.068011] hub 1-0:1.0: USB hub found [ 2.071789] hub 1-0:1.0: 1 port detected [ 2.075976] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 2.081481] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 2.089155] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 2.095737] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.104593] hub 2-0:1.0: USB hub found [ 2.108379] hub 2-0:1.0: 1 port detected [ 2.113322] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 5 mkt segment 0 supported-hw 0x20 0x1 [ 2.124835] mxc-mipi-csi2-sam 32e40000.csi: supply mipi-phy not found, using dummy regulator [ 2.125106] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO [ 2.133656] : mipi_csis_imx8mp_phy_reset, No remote pad found! [ 2.144245] mxc-mipi-csi2-sam 32e40000.csi: lanes: 2, hs_settle: 13, clk_settle: 2, wclk: 1, freq: 500000000 [ 2.155213] mxc-mipi-csi2-sam 32e50000.csi: supply mipi-phy not found, using dummy regulator [ 2.164019] : mipi_csis_imx8mp_phy_reset, No remote pad found! [ 2.169921] mxc-mipi-csi2-sam 32e50000.csi: lanes: 2, hs_settle: 13, clk_settle: 2, wclk: 1, freq: 266000000 [ 2.172629] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA [ 2.181676] isi-capture 32e00000.isi:cap_device: deferring 32e00000.isi:cap_device device registration [ 2.196978] mxc-isi 32e00000.isi: mxc_isi.0 registered successfully [ 2.204912] isi-capture 32e02000.isi:cap_device: deferring 32e02000.isi:cap_device device registration [ 2.214374] mxc-isi 32e02000.isi: mxc_isi.1 registered successfully [ 2.223575] dwhdmi-imx 32fd8000.hdmi: Detected HDMI TX controller v2.13a with HDCP (samsung_dw_hdmi_phy2) [ 2.227158] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.235103] dwhdmi-imx 32fd8000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.245092] mmc1: new high speed SDHC card at address aaaa [ 2.252673] imx-drm display-subsystem: bound imx-lcdifv3-crtc.0 (ops lcdifv3_crtc_ops) [ 2.255359] mmcblk1: mmc1:aaaa SA16G 14.8 GiB [ 2.262033] imx-drm display-subsystem: bound 32fd8000.hdmi (ops dw_hdmi_imx_ops) [ 2.270081] mmcblk1: p1 p2 p3 [ 2.274337] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.284752] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 2.298449] isi-m2m 32e00000.isi:m2m_device: Register m2m success for ISI.0 [ 2.305583] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.316639] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.317420] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA [ 2.325914] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.338943] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 2.347091] ALSA device list: [ 2.350072] No soundcards found. [ 2.372674] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 2.382504] VFS: Mounted root (ext4 filesystem) readonly on device 179:99. [ 2.398828] devtmpfs: mounted [ 2.402506] Freeing unused kernel memory: 2944K [ 2.407121] Run /sbin/init as init process [ 2.551919] random: fast init done [ 3.026354] systemd[1]: System time before build time, advancing clock. [ 3.064706] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP + LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 3.088550] systemd[1]: Detected architecture arm64.
Welcome to Debian GNU/Linux 11 (bullseye)!
[ 3.139998] systemd[1]: Set hostname to <uefi-arm64>. [ 3.201880] Hot alarm is canceled. GPU3D clock will return to 64/64 [ 3.609007] systemd[178]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. [ 3.880648] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it di sables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or ' control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 4.074251] systemd[1]: Queued start job for default target Graphical Interface. [ 4.084321] random: systemd: uninitialized urandom read (16 bytes read) [ 4.091166] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firew alling. [ 4.103793] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 4.114485] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 4.138251] random: systemd: uninitialized urandom read (16 bytes read) [ 4.146036] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.170255] random: systemd: uninitialized urandom read (16 bytes read) [ 4.177892] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.202520] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 4.226123] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 4.238098] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.262246] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 4.282260] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 4.302397] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 4.322655] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 4.346457] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 4.370839] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 4.383574] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 4.406754] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.434100] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.458673] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.485562] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 4.508830] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 4.532797] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 4.550883] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 4.569735] systemd[1]: Starting Restore / save the current clock...
Starting Restore / save the current clock...
[ 4.593660] systemd[1]: Starting Set the console keyboard layout...
Starting Set the console keyboard layout...
[ 4.614380] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. [ 4.629117] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 4.653138] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 4.673290] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 4.696967] systemd[1]: Started Nameserver information manager. [ OK ] Started Nameserver information manager. [ 4.718364] systemd[1]: Reached target Network (Pre). [ OK ] Reached target Network (Pre). [ 4.740455] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 4.752435] systemd[1]: Starting File System Check on Root Device...
Starting File System Check on Root Device...
[ 4.780826] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 4.789397] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 4.802600] systemd[1]: Mounted Huge Pages File System. [ OK ] Mounted 4.808509] systemd[1]: Mounted POSIX Message Queue File System.
- 39mHuge Pages File System.
[ 4.817509] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted 4.826614] systemd[1]: Finished Restore / save the current clock.
- 39mPOSIX Message Queue File Syst[ 4.835477] systemd[1]
- modprobe@configfs.service: Succeeded.
em. [ OK ] Moun[ 4.843716] systemd[1]: Finished Load Kernel Module configfs. ted Kernel Debug File Sy[ 4.852727] systemd[1]: modprobe@drm.service: Succeeded. stem. [ OK ] Fi[ 4.860517] systemd[1]: Finished Load Kernel Module drm. nished Restore / save th[ 4.868992] systemd[1]: modprobe@fuse.service: Succeeded. e current clock. [ O[ 4.876953] systemd[1]: Finished Load Kernel Module fuse. K ] Finished Load Kernel Module configfs. [ 4.887084] systemd[1]: Finished Load Kernel Modules. 0;32m OK ] Finished 4.896628] systemd[1]: Condition check resulted in FUSE Control File System being skipped. 9mLoad Kernel Module drm. [ OK ] Finished 4.909507] systemd[1]: Mounting Kernel Configuration File System... 1;39mLoad Kernel Module fuse. [ OK ] Finished [ 4.921091] systemd[1]: Started File System Check Daemon to report status. Load Kernel Modules.
Mounting Ke[ 4.933844] systemd[1]: Starting Apply Kernel Variables...
rnel Configuration File System... [ OK ] Start[ 4.945273] systemd[1]: Finished Set the console keyboard layout. ed File System Check Dae[ 4.954257] systemd[1]: Mounted Kernel Configuration File System. mon to report status.
Starting Apply Kernel Variables...
[ OK ] Finished Set the console keyboard layout. [ OK ] Mounted Kernel Configuration File System. [ 5.007387] systemd[1]: Finished File System Check on Root Device. [ OK ] Finished File System Check on Root Device. [ 5.031370] systemd[1]: Finished Apply Kernel Variables. [ OK ] Finished Apply Kernel Variables. [ 5.057614] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 5.256231] EXT4-fs (mmcblk1p3): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none. [ 5.269736] systemd[1]: Finished Remount Root and Kernel File Systems. [ OK ] Finished Remount Root and Kernel File Systems. [ 5.300724] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 5.309390] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 5.321700] systemd[1]: Starting Load/Save Random Seed...
Starting Load/Save Random Seed...
[ 5.344978] systemd[1]: Starting Create System Users...
Starting Create System Users...
[ 5.396537] systemd[1]: Finished Create System Users. [ OK ] Finished Create System Users. [ 5.416013] systemd[1]: Finished Coldplug All udev Devices. [ OK ] Finished Coldplug All udev Devices. [ 5.443231] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Starting Helper to synchronize boot up for ifupdown...
[ 5.468965] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting Create Static Device Nodes in /dev...
[ 5.514321] systemd[1]: Finished Create Static Device Nodes in /dev. [ OK ] Finished Create Static Device Nodes in /dev. [ 5.542593] systemd[1]: Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems (Pre). [ 5.570962] systemd[1]: Mounting /tmp...
Mounting /tmp...
[ 5.593042] systemd[1]: Starting Rule-based Manager for Device Events and Files...
Starting Rule-based Manage…for Device Events and Files...
[ 5.620259] systemd[1]: Mounted /tmp. [ OK ] Mounted /tmp. [ 5.638377] systemd[1]: Reached target Local File Systems. [ OK ] Reached target Local File Systems. [ 5.664910] systemd[1]: Starting Armbian leds state...
Starting Armbian leds state...
[ 5.685146] systemd[1]: Starting Armbian ZRAM config...
Starting Armbian ZRAM config...
[ 5.704707] systemd[1]: Starting Set console font and keymap...
Starting Set console font and keymap...
[ 5.724808] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
Starting Tell Plymouth To Write Out Runtime Data...
[ 5.747410] systemd[1]: Finished Set console font and keymap. [ OK ] Finished Set console font and keymap. [ 5.771579] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. [ OK ] Finished Tell Plymouth To Write Out Runtime Data. [ 5.794462] systemd[1]: Started Rule-based Manager for Device Events and Files. [ OK ] Started Rule-based Manager for Device Events and Files. [ 5.819462] systemd[1]: Finished Armbian leds state. [ OK ] Finished Armbian leds state. [ 5.841045] systemd[1]: Starting Show Plymouth Boot Screen...
Starting Show Plymouth Boot Screen...
[ 5.885988] systemd[1]: Received SIGRTMIN+20 from PID 267 (plymouthd). [ 5.915469] systemd[1]: Started Show Plymouth Boot Screen. [ OK ] Started 5.922352] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsp lash is active being skipped.
- 39mShow Plymouth Boot Screen[ 5.938359] systemd[1]
- Started Forward Password Requests to Plymouth Directory Watch.
. [ OK ] Started 5.949356] systemd[1]: Reached target Local Encrypted Volumes.
- 39mForward Password R…s to Ply[ 5.959551] systemd[1]
- Reached target Paths.
mouth Directory Watch. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Reached target Paths. [ 6.026527] systemd[1]: armbian-zram-config.service: Main process exited, code=exited, status=1/FAILURE [ 6.036769] systemd[1]: armbian-zram-config.service: Failed with result 'exit-code'. [ 6.045780] systemd[1]: Failed to start Armbian ZRAM config. [FAILED] Failed to start Armbian ZRAM conf[ 6.055314] systemd[1]: Starting Armbian memory supported logging... ig. See 'systemctl status armbian-zram-config.service' for details.
Starting Armbian memory supported logging...
[ 6.265405] systemd[1]: Found device /dev/ttymxc1. [ 6.270606] cfg80211: failed to load regulatory.db [ OK ] Found device /dev/ttymxc1. [ 6.421201] imx-sdma 30e10000.dma-controller: firmware found. [ 6.421201] imx-sdma 30bd0000.dma-controller: firmware found. [ 6.421372] imx-sdma 30bd0000.dma-controller: loaded firmware 4.5 [ 7.001399] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ OK ] Finished 7.011956] systemd[1]: Starting Raise network interfaces... 1;39mHelper to synchronize boot up for ifupdown.
Starting Raise network interfaces...
[ 7.225419] Generic PHY 30be0000.ethernet-1:08: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:08, irq=POLL) [ 7.310724] systemd[1]: Finished Raise network interfaces. [ OK ] Finished Raise network interfaces. [ 7.613835] random: crng init done [ 7.617252] random: 7 urandom warning(s) missed due to ratelimiting [ 7.648331] systemd[1]: Finished Load/Save Random Seed. [ OK ] Finished 7.654340] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 7.664986] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[ 7.677519] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 8.607137] systemd[1]: Finished Armbian memory supported logging. [ OK ] Finished Armbian memory supported l[ 8.616777] systemd[1]: Starting Journal Service... ogging.
Starting Journal Service...
[ 8.813254] systemd[1]: Started Journal Service. [ OK ] Started Journal Service.
Starting Flush Journal to Persistent Storage...
[ 8.851136] systemd-journald[422]: Received client request to flush runtime journal. [ OK ] Finished Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Finished Create Volatile Files and Directories. [ OK ] Started Entropy Daemon based on the HAVEGE algorithm.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Clean PHP session files every 30 mins. [ OK ] Started Run system activit…ounting tool every 10 minutes. [ OK ] Started Generate summary o…esterday's process accounting. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets.
Starting Armbian hardware monitoring...
Starting Armbian hardware optimization...
[ OK ] Finished Armbian hardware monitoring. [ OK ] Finished Armbian hardware optimization. [ OK ] Reached target Basic System. [ OK ] Started Armbian first run tasks. [ OK ] Created slice system-getty.slice. [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus.
Starting Remove Stale Onli…t4 Metadata Check Snapshots...
Starting LSB: Load kernel …d to enable cpufreq scaling...
Starting System Logging Service...
Starting Resets System Activity Logs...
Starting User Login Management...
Starting WPA supplicant...
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ 9.283020] fec 30be0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 9.291303] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Finished Resets System Activity Logs. [ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling.
Starting LSB: set CPUFreq kernel parameters...
[ OK ] Started System Logging Service. [ OK ] Started LSB: set CPUFreq kernel parameters.
Starting LSB: Set sysfs variables from /etc/sysfs.conf...
[ OK ] Started User Login Management. [ OK ] Started WPA supplicant. [ OK ] Reached target Network. [ OK ] Reached target Network is Online.
Starting LSB: Advanced IEEE 802.11 management daemon...
Starting Network Time Service...
Starting OpenVPN service...
Starting /etc/rc.local Compatibility...
Starting OpenBSD Secure Shell server...
Starting Permit User Sessions...
[ 9.710449] systemd-journald[422]: Received client request to relinquish /var/log/journal/9d4683f3346a494aa37ca5176b1495aa access. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. [ OK ] Finished OpenVPN service. [ OK ] Started /etc/rc.local Compatibility. [ OK ] Finished Permit User Sessions.
Starting Hold until boot process finishes up...
Starting Terminate Plymouth Boot Screen...
Armbian 22.11.1 Bullseye ttymxc1
uefi-arm64 login: [ 21.520671] systemd-journald[422]: Received client request to flush runtime journal. [ 21.589388] systemd-journald[422]: Received client request to relinquish /var/log/journal/9d4683f3346a494aa37ca5176b1495aa access.
uefi-arm64 login: root Password:
_ _ _____ _____ ___ __ _ _
| | | | ____| ___|_ _| __ _ _ __ _ __ ___ / /_ | || | | | | | _| | |_ | | / _` | '__| '_ ` _ \| '_ \| || |_ | |_| | |___| _| | | | (_| | | | | | | | | (_) |__ _|
\___/|_____|_| |___| \__,_|_| |_| |_| |_|\___/ |_|
Welcome to Armbian 22.11.4 Bullseye with Linux 5.15.32-00007-gfe10aa07dfca-dirty
System load: 21% Up time: 1 min Memory usage: 6% of 5.47G IP: 192.168.0.81 CPU temp: 47°C Usage of /: 41% of 9.2G
[ Menu-driven system configuration (beta): sudo apt update && sudo apt install armbian-config ]
root@uefi-arm64:~#
