NaonEVB-Mid is a carrier board designed to evaluate the functionalities of [[:Category:Naon SOM|NAON]].

U-Boot 2010.06-0031100011-gb07cc94-dirty gd371eb4 (Jul 24 2012 Apr 22 2013 - 0912:2917:3817) [nelk-24.0.0-Naon-min-rc1]

U-Boot 2010.06-0031100011-gb07cc94-dirty gd371eb4 (Jul 24 2012 Apr 22 2013 - 0912:2917:3253) [nelk-24.0.0-rc1Naon]

NAND: Searching for NAND device @ GPMC CS:0HW ECC BCH8 Selected

MUX: configuring for evb_midNet: Detected MACID:000:50:c2C2:b91E:cfAF:b1E3

loadaddr=0x81000000spi_load_1st=tftp ${loadaddr} naon/MLOnand_load_1st=mw.b ${loadaddr} 0xFF 0x20000; tftp ${loadaddr} naon/MLOspi_update_1st=sf probe 0:0; sf erase 0x0 0x20000; sf write ${loadaddr} 0x0 0x20000nand_update_1st=nand erase 0x0 0x20000; nandecc hw 2; nand write.i ${loadaddr} 0x0 0x20000load=mw.b ${loadaddr} 0xFF 0x40000; tftp ${loadaddr} naon/u-boot.binspi_update=sf probe 0:0; sf erase 0x20000 0x40000; sf write ${loadaddr} 0x20000 0x40000nand_update=nand erase 0x20000 0x40000; nandecc hw 2; nand write.i ${loadaddr} 0x20000 0x40000loadk=mw.b ${loadaddr} 0xFF 0x400000; tftp ${loadaddr} ${bootfile}spi_updatek=sf probe 0:0; sf erase 0x80000 0x3000000x400000; sf write ${loadaddr} 0x80000 0x3000000x400000nand_updatek=nand erase 0xA0000 0x400000; nandecc hw 2; nand write.i ${loadaddr} 0xA0000 0x400000console=ttyO0addcons=setenv bootargs ${bootargs} console=${console},115200n8 earlyprintkaddmem=setenv bootargs ${bootargs} mem=${mem} vram=${vram} notifyk.vpssm3_sva=${notify_mem}addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gateway}:${netmask}:${hostname}:${ethdev}nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} panic=5 rootdelay=5net_nfs=run loadk nfsargs addip addcons addmem; bootm ${buf}

spi_nand=run nandargs addip addcons addmem; sf probe 0:0; sf read ${loadaddr} 0x80000 0x3000000x400000; bootm ${loadaddr}nand_nand=run nandargs addip addcons addmem; nandecc hw 2; nand read ${loadaddr} 0xA0000 0x400000; bootm $(loadaddr}

spi_mmc=run mmcargs addip addcons addmem; sf probe 0:0; sf read ${loadaddr} 0x80000 0x3000000x400000; bootm ${loadaddr}ethactipaddr=cpswserial#_DAx=00B1ethaddr=00:50:C2:B9:CF:B1spi_load_1st=tftp ${loadaddr} produzione/naon/nelk/1192.0168.0/u-boot.min.spi77spi_update_1stserverip=sf probe 192.168.0:0; sf erase 0x0 0x20000; sf write ${loadaddr} 0x0 0x20000.23loadnetmask=tftp ${loadaddr} produzione/naon/nelk/1255.0255.0/u-boot255.binspi_update=sf probe 0:0; sf erase 0x20000 0x40000; sf write ${loadaddr} 0x20000 0x40000loadaddr=0x81000000loadk=tftp ${loadaddr} ${bootfile}rootpath=/home/shared/produzione/rfs/naonnfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} panic=5

ethdevrootpath=eth0/home/shared/devel/dave/naon-DAA/sw/linux/sdk/rfs/nelkaddip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gateway}:${netmask}:${hostname}:${ethdev}console=ttyO0addcons=setenv bootargs ${bootargs} console=${console},115200n8 earlyprintketh1

addmemethaddr=setenv bootargs ${bootargs} mem=${mem} vram=${vram} notifyk.vpssm3_sva=${notify_mem}net_nfs=run loadk nfsargs addip addcons addmem; bootm ${buf}DAx_test_result=test_passed00:17:EB:52:6A:8Abaudrateethact=115200cpsw=1giga=onbootcmd=run spi_mmcbootfile=posdk5.04/uImagefilesize=284C68fileaddr=81000000netmask=255.255.255.0ipaddr=192.168.0.213serveripnaon_host=192.168.0.250evb_mid

==== Booting from SD/MMC ==== If you have the bootable SD/MMC provided with the development kitand it contains the boot.scr script file, the following command is automatically executed by U-Boot: <pre class="board-terminal">echo trying to boot from NELK MMC; mmc rescan 0; fatload mmc 0 80900000 boot.scr; source 80900000; run net_nfs</pre> If the boot.scr script file is not available, you can manually boot the system from SD using the following commands: <pre class="board-terminal">mmc rescan 0fatload mmc 0 81000000 uImagesetenv mmcargs 'setenv bootargs root=/dev/mmcblk0p2 rw'run mmcargs addip addcons addmembootm 81000000</pre>  If a Linux kernel image has been preliminary programmed on the SPI NOR flash, you can run the following command:

==== Booting from network ==== If you have installed the [[:Category:DVDK|Dave '''DAVE Embedded Systems''' Virtual Development Kit]], you can start the Virtual Machine and start Linux loading the kernel through tftp and mounting the NFS root file system with the following command: