Difference between revisions of "MITO 8M Nano SOM/MITO 8M Nano Evaluation Kit/Interfaces and Connectors/Power Supply"
(Created page with "{{#lst:MITO_8M_Mini_SOM/MITO_8M_Mini_Evaluation_Kit/Interfaces_and_Connectors/Power_Supply}}") |
|||
| Line 1: | Line 1: | ||
| + | <section begin=Body/> | ||
{{#lst:MITO_8M_Mini_SOM/MITO_8M_Mini_Evaluation_Kit/Interfaces_and_Connectors/Power_Supply}} | {{#lst:MITO_8M_Mini_SOM/MITO_8M_Mini_Evaluation_Kit/Interfaces_and_Connectors/Power_Supply}} | ||
| + | <section end=Body/> | ||
Revision as of 13:13, 10 May 2022
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2022/05/04 | First release | ||
Power Supply[edit | edit source]
Description[edit | edit source]
Power is provided through the J2 connector. Power voltage range is +[12-24 V].
J2 is a two pins MSTBA 2.5/2-G-5.08 Phoenix connector.
Signals[edit | edit source]
The following table describes the interface signals:
| Pin# | Pin function | Pin Notes |
|---|---|---|
| 1 | DGND | Ground |
| 2 | VIN | +[12-24 V] |
Power LED[edit | edit source]
DL1 is a green LED (placed near battery holder) shows the status of the power input. This LED is ON when a valid power supply is present.
