MITO 8M Nano SOM/MITO 8M Nano Evaluation Kit/Getting started/Boot Configurations
< MITO 8M Nano SOM | MITO 8M Nano Evaluation Kit| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2022/05/10 | First release | ||
Contents
Boot ConfigurationsEdit
MITO 8M Mini Evaluation Board is built upon i.MX8M Mini/Nano family processor.
The following sections detail boot configuration options, which differ depending on the SoM.
For more information about MITO 8M Mini boot options, see the related page on MITO 8M Mini Hardware Manual.
Available optionsEdit
Boot modes can be selected by J32 jumper switches which acts directly on J2.20 BOOT_MODE_SEL SOM pin.
| Boot options order code | Jumper mounted | Jumper not mounted |
|---|---|---|
| Boot from NAND | SD | NAND |
| Boot from eMMC | SD | eMMC |
