MITO 8M Mini SOM/MITO 8M Mini Hardware/Peripherals/SPI
< MITO 8M Mini SOM | MITO 8M Mini Hardware
Revision as of 15:21, 29 December 2020 by U0009 (talk | contribs) (Created page with "<section begin=History/> {| style="border-collapse:collapse; " ! colspan="4" style="width:100%; text-align:left" ; border-bottom:solid 2px #ededed" |History |- ! style="borde...")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Dec 2020 | First release | |
Peripheral SPI[edit | edit source]
The Enhanced Configurable Serial Peripheral Interface (ECSPI) is a full-duplex, synchronous, four-wire serial communication block.
Description[edit | edit source]
Three SPI interface are available on MITO 8M Mini/Nano based on iMX8M Mini/Nano SoC.
The SPI port supports the following standards and features:
- Full-duplex synchronous serial interface
- Master/Slave configurable
- One Chip Select (SS) signal
- Transfer continuation function allows unlimited length data transfers
- 32-bit wide by 64-entry FIFO for both transmit and receive data
- Polarity and phase of the Chip Select (SS) and SPI Clock (SCLK) are configurable
- Direct Memory Access (DMA) support
Pin mapping[edit | edit source]
The Pin mapping is described in the Pinout table section
