| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Dec 2020 | First release | |
Contents
Peripheral SPIEdit
The Enhanced Configurable Serial Peripheral Interface (ECSPI) is a full-duplex, synchronous, four-wire serial communication block.
DescriptionEdit
Three SPI interface are available on MITO 8M Mini/Nano based on iMX8M Mini/Nano SoC.
The SPI port supports the following standards and features:
- Full-duplex synchronous serial interface
- Master/Slave configurable
- One Chip Select (SS) signal
- Transfer continuation function allows unlimited length data transfers
- 32-bit wide by 64-entry FIFO for both transmit and receive data
- Polarity and phase of the Chip Select (SS) and SPI Clock (SCLK) are configurable
- Direct Memory Access (DMA) support
Pin mappingEdit
The Pin mapping is described in the Pinout table section