MITO 8M Mini SOM/MITO 8M Mini Evaluation Kit/Interfaces and Connectors/USB ports

From DAVE Developer's Wiki
< MITO 8M Mini SOM‎ | MITO 8M Mini Evaluation Kit
Revision as of 11:13, 4 May 2022 by U0007 (talk | contribs) (Device usage)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
History
Version Issue Date Notes
1.0.0 Apr 2022 First release


USB ports[edit | edit source]

Description[edit | edit source]

MITO 8M Mini Evaluation Kit provides two USB ports, one Host and one OTG:

  • J17 is a standard USB Host 2.0 Type A connector
USB Host connector


  • J18 is a micro-AB type receptacle for a USB OTG connection: this interface can operate in Host mode and Device (peripheral) mode


USB OTG connector

Signals[edit | edit source]

The following table describes the interface signals

USB Host[edit | edit source]

Pin# SOM Pin# Pin name Pin function Pin Notes
1 J10.188 USB_HOST_VBUS VBUS USB2 VBUS
2 J10.202 USB_HOST_DN USB Host Data - USB2 DM
3 J10.200 USB_HOST_DP USB Host Data + USB2 DP
4 - DGND Ground

USB OTG[edit | edit source]

Pin# SOM Pin# Pin name Pin function Pin Notes
6, 7, 8, 9 - USB_OTG_SH Shield
1 J10.186 USB_OTG_VBUS VBUS USB1 VBUS
2 J10.196 USB_OTG_DN USB OTG Data - USB1 DM
3 J10.198 USB_OTG_DP USB OTG Data + USB1 DP
4 J10.192 ENET_RX_ER USB OTG ID USB1 ID
5 - GND Ground

Device usage[edit | edit source]

The USB Host port can be used under Linux for connecting USB peripheral devices: the related peripheral driver has to be integrated into the Linux kernel.

The USB OTG feature can be easily tested using the Mass Storage Gadget driver.