Difference between revisions of "MITO 8M Mini SOM/MITO 8M Mini Evaluation Kit/Interfaces and Connectors/Power Supply"
(Created page with "<section begin=History/> {| style="border-collapse:collapse; " !colspan="4" style="width:100%; text-align:left"; border-bottom:solid 2px #ededed"|History |- !style="border-le...") |
(→Power LED) |
||
| Line 44: | Line 44: | ||
[[Category:MITO 8M Mini]] | [[Category:MITO 8M Mini]] | ||
| + | [[Category:MITO 8M Nano]] | ||
Revision as of 11:11, 4 May 2022
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Apr 2022 | First release | |
Power Supply[edit | edit source]
Description[edit | edit source]
Power is provided through the J2 connector. Power voltage range is +[12-24 V].
J2 is a two pins MSTBA 2.5/2-G-5.08 Phoenix connector.
Signals[edit | edit source]
The following table describes the interface signals:
| Pin# | Pin function | Pin Notes |
|---|---|---|
| 1 | DGND | Ground |
| 2 | VIN | +[12-24 V] |
Power LED[edit | edit source]
DL1 is a green LED (placed near battery holder) shows the status of the power input. This LED is ON when a valid power supply is present.
