Changes

===Bootstrap Full bootstrap process===

U-Boot 2016.03-rialto-1.1.2 (Jan 17 2019 - 15:10:28 +0100), Build: jenkins-Rialto_U-Boot-10 CPU: Freescale i.MX6UL rev1.2 528 MHz (running at 396 MHz)CPU: Industrial temperature grade (-40C to 105C) at 36CReset cause: POREnvironment: NANDI2C: readyDRAM: 512 MiBRelocating to 9ff1c000, new gd at 9eefbeb8, sp at 9eefbe90PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11NAND: 1024 MiBMMC: FSL_SDHC: 0In: serialOut: serialErr: serialswitch to partitions #0, OKmmc0 is current deviceSOM ConfigID#: 00000022SOM UniqueID#: ee6b78bb:1e08a9d4CB ConfigID#: 00000046CB UniqueID#: 00000000:00000000Board: MX6UL RialtoNet: FEC0Normal BootHit any key to stop autoboot: 0=> run net_mmcFEC0 Waiting for PHY auto negotiation to complete...... doneUsing FEC0 deviceTFTP from server 192.168.0.13; our IP address is 192.168.0.81Filename 'rialto/linux/rialto-1.1.3_uImage'.Load address: 0x80800000Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 819.3 KiB/sdoneBytes transferred = 7170152 (6d6868 hex)Using FEC0 deviceTFTP from server 192.168.0.13; our IP address is 192.168.0.81Filename 'rialto/linux/rialto-1.1.3_imx6ul-lynx-som0022-cb0046.dtb'.Load address: 0x83000000Loading: ####### 540 KiB/sdoneBytes transferred = 33793 (8401 hex)FDT: override 'som_uniqueid' with 'ee6b78bb:1e08a9d4'FDT: override 'cb_uniqueid' with '00000000:00000000'## Booting kernel from Legacy Image at 80800000 ... Image Name: Linux-4.1.15-rialto-1.1.3 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 7170088 Bytes = 6.8 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000FDT: fixup by running configid_fixupfdt..FDT: override 'som_uniqueid' with 'ee6b78bb:1e08a9d4'FDT: override 'cb_uniqueid' with '00000000:00000000' Loading Kernel Image ... OK reserving fdt memory region: addr=83000000 size=9000 Using Device Tree in place at 83000000, end 8300bfffModify /soc/aips-bus@02000000/bee@02044000:status disabledft_system_setup for mx6 

[ 0.000000] Linux version 4.91.1115-xelkrialto-41.01.0-00001-g892b58a968ea 3 (llandrejenkins@linuxserver2) (gcc version 65.23.0 (GCC) ) #3 1 SMP PREEMPT Tue Aug 20 09Thu Jul 18 16:1619:33 12 CEST 2019[ 0.000000] CPU: ARMv7 Processor [412fc09a410fc075] revision 10 5 (ARMv7), cr=10c53c7d

[ 0.000000] OF: fdt:Machine model: AxelLite Quad on XELK-LFreescale i.MX6 UltraLite CB0046 SBCSPG rev.A[ 0.000000] OF: fdtcma:Reserved memory: failed to reserve memory for node 'splashscreen': base 0x00000000, size 0 64 MiBat 0x9c000000

[ 0.000000] percpuPERCPU: Embedded 14 12 pages/cpu @e559b000 s26060 9bbb1000 s17420 r8192 d23092 u57344d23540 u49152[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520598130048[ 0.000000] Kernel command line: root=/dev/mmcblk1p1 mmcblk0p4 rootwait rw ip=192.168.0.8081:192.168.0.13:192.168.0.254:255.255.255.0:xelklynx:eth0:off panic=1 fec_mac=0070:50b3:c2d5:1e3e:afa5:b2 72 console=ttymxc2ttymxc0,115200n8 115200 vmalloc=400M mtdparts=gpmi-nand:8M(nand-uboot),1M(nand-env1),1M(nand-env2),1M(nand-dtb),1M(nand-spare),8M(nand-kernel),-(nand-ubi);spi32766spi0.0:1M(spi-uboot),256k(spi-env1),256k(spi-env2),512k(spi-dtb),6M8M(spi-kernel),-4M(spi-freesplash) maxcpus=4 video=mxcfb0:dev=lcd,LCD-AM(spi-800480STMQW-TA1,if=RGB666free)[ 0.000000] PID hash table entries: 4096 2048 (order: 21, 16384 8192 bytes)[ 0.000000] Dentry cache hash table entries: 262144 65536 (order: 86, 1048576 262144 bytes)[ 0.000000] Inode-cache hash table entries: 131072 32768 (order: 75, 524288 131072 bytes)[ 0.000000] Memory: 1733632K440268K/2097152K 524288K available (10240K 8829K kernel code, 578K 561K rwdata, 2632K 3336K rodata, 1024K 448K init, 468K 444K bss, 363520K 18484K reserved, 0K 65536K cma-reserved, 90112K 0K highmem)

[ 0.000000] vmalloc : 0xe7000000 0xa0800000 - 0xff800000 0xff000000 ( 392 1512 MB)[ 0.000000] lowmem : 0x80000000 - 0xe6800000 0xa0000000 (1640 512 MB)

[ 0.000000] .text : 0x80008000 - 0x80b00000 0x80be9914 (11232 12167 kB)[ 0.000000] .init : 0x80e00000 0x80bea000 - 0x80f00000 0x80c5a000 (1024 448 kB)[ 0.000000] .data : 0x80f00000 0x80c5a000 - 0x80f909a0 0x80ce6770 ( 579 562 kB)[ 0.000000] .bss : 0x80f909a0 0x80ce9000 - 0x81005ab0 0x80d583c0 ( 469 445 kB)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=41, Nodes=1

[ 0.000000] BuildAdditional per-time adjustment of leaf fanout CPU info printed with stalls.[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to 32nr_cpu_ids=1.[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1

[ 0.000000] L2C: DT/platform modifies aux control register: 0x32070000 -> 0x32470000mxc_clocksource_init 24000000[ 0.000000] L2CSwitching to timer-310 errata 752271 769419 enabledbased delay loop, resolution 41ns[ 0.000000000017] L2C-310 enabling early BRESP for Cortex-A9sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns[ 0.000000000059] L2C-310 full line of zeros enabled for Cortex-A9[ clocksource mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns[ 0.000000002544] L2C-310 ID prefetch enabled, offset 16 linesConsole: colour dummy device 80x30[ 0.000000002586] L2C-310 dynamic clock gating enabledCalibrating delay loop (skipped), standby mode enabledvalue calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)[ 0.000000002619] pid_max: default: 32768 minimum: 301[ 0.002863] L2CMount-310 cache controller enabledhash table entries: 1024 (order: 0, 16 ways, 1024 kB4096 bytes)[ 0.000000002896] L2CMountpoint-310cache hash table entries: CACHE_ID 0x410000c71024 (order: 0, AUX_CTRL 0x764700014096 bytes)[ 0.000000004269] Switching to timer-based delay loop, resolution 333nsInitializing cgroup subsys net_cls[ 0.000007004358] sched_clockCPU: Testing write buffer coherency: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841nsok[ 0.004851] /cpus/cpu@0 missing clock-frequency property[ 0.000023004893] clocksourceCPU0: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffffthread -1, cpu 0, socket 0, max_idle_ns: 637086815595 nsmpidr 80000000[ 0.001305005007] Console: colour dummy device 80x30Setting up static identity map for 0x80008280 - 0x800082d8[ 0.001326049002] Calibrating delay loop (skipped), value calculated using timer frequencyBrought up 1 CPUs[ 0.. 6049046] SMP: Total of 1 processors activated (48.00 BogoMIPS ).[ 0.049068] CPU: All CPU(lpj=30000s)started in SVC mode.[ 0.001340050199] pid_maxdevtmpfs: default: 32768 minimum: 301initialized[ 0.001461072529] Mount-cache hash table entries: 4096 (orderVFP support v0.3: implementor 41 architecture 2, 16384 bytes)part 30 variant 7 rev 5[ 0.001473073449] Mountpoint-cache hash table entriesclocksource jiffies: mask: 4096 (order0xffffffff max_cycles: 20xffffffff, 16384 bytes)max_idle_ns: 19112604462750000 ns[ 0.002152078835] CPUpinctrl core: Testing write buffer coherency: okinitialized pinctrl subsystem[ 0.002511081917] CPU0NET: thread -1, cpu 0, socket 0, mpidr 80000000Registered protocol family 16[ 0.002573100032] Setting up static identity map DMA: preallocated 256 KiB pool for 0x10100000 - 0x10100058atomic coherent allocations[ 0.149858130931] CPU1cpuidle: thread -1, cpu 1, socket 0, mpidr 80000001using governor ladder[ 0.219845161000] CPU2cpuidle: thread -1, cpu 2, socket 0, mpidr 80000002using governor menu[ 0.289845209331] CPU3hw-breakpoint: thread -found 5 (+1, cpu 3, socket 0, mpidr 80000003reserved) breakpoint and 4 watchpoint registers.[ 0.289938209366] Brought up 4 CPUshw-breakpoint: maximum watchpoint size is 8 bytes.[ 0.289962213881] SMPimx6ul-pinctrl 20e0000.iomuxc: Total of 4 processors activated (24.00 BogoMIPS).initialized IMX pinctrl driver[ 0.289972288772] CPUmxs-dma 1804000.dma-apbh: All CPU(s) started in SVC mode.initialized[ 0.290797296632] devtmpfs: SCSI subsystem initialized[ 0.303116297997] VFP support v0.3usbcore: implementor 41 architecture 3 part 30 variant 9 rev 4registered new interface driver usbfs[ 0.303415298237] clocksourceusbcore: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 nsregistered new interface driver hub[ 0.303553298467] xorusbcore: measuring software checksum speedregistered new device driver usb[ 0.399574301170] arm4regs i2c i2c-0: 1229.200 MB/secIMX I2C adapter registered[ 0.499575301217] 8regs i2c i2c-0: 948.400 MB/seccan't use DMA[ 0.599575302989] 32regs i2c i2c-1: 1025.200 MB/secIMX I2C adapter registered[ 0.599585303035] xori2c i2c-1: using function: arm4regs (1229.200 MB/sec)can't use DMA[ 0.599605303383] pinctrl coreLinux video capture interface: initialized pinctrl subsystemv2.00[ 0.600546303599] NETpps_core: Registered protocol family 16LinuxPPS API ver. 1 registered[ 0.601598303624] DMApps_core: preallocated 256 KiB pool for atomic coherent allocationsSoftware ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>[ 0.629594303709] cpuidle: using governor menuPTP clock support registered[ 0.629863306533] CPU identified as i.MX6Q, silicon rev 1.5MIPI CSI2 driver module loaded[ 0.629980307222] Use WDOG2 as reset sourceAdvanced Linux Sound Architecture Driver Initialized.[ 0.640092309413] vddarmBluetooth: bypassed regulator has no supply!Core ver 2.20[ 0.640104309546] vddarmNET: failed to get the current voltage(-517)Registered protocol family 31[ 0.640866309572] vddsocBluetooth: bypassed regulator has no supply!HCI device and connection manager initialized[ 0.640878309615] vddsocBluetooth: failed to get the current voltage(-517)HCI socket layer initialized[ 0.652274309650] hw-breakpointBluetooth: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.L2CAP socket layer initialized[ 0.652286309768] hw-breakpointBluetooth: maximum watchpoint size is 4 bytes.SCO socket layer initialized[ 0.653064312653] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driverSwitched to clocksource mxc_timer1[ 0.655326340510] imx-gpc 20dc000.gpcNET: pu regulator not ready, retryRegistered protocol family 2[ 0.859845342142] raid6TCP established hash table entries: int32x1 gen4096 () 106 MB/sorder: 2, 16384 bytes)[ 10.029627342281] raid6TCP bind hash table entries: int32x1 xor4096 (order: 3, 32768 bytes) 148 MB/s[ 10.199808342439] raid6TCP: int32x2 genHash tables configured (established 4096 bind 4096) 165 MB/s[ 10.369715342586] raid6UDP hash table entries: int32x2 xor256 (order: 1, 8192 bytes) 168 MB/s[ 10.539890342772] raid6UDP-Lite hash table entries: int32x4 gen256 (order: 1, 8192 bytes) 193 MB/s[ 10.709588343244] raid6NET: int32x4 xor() 169 MB/sRegistered protocol family 1[ 10.879821343999] raid6RPC: int32x8 gen() 215 MB/sRegistered named UNIX socket transport module.[ 20.049683344036] raid6RPC: int32x8 xor() 156 MB/sRegistered udp transport module.[ 20.049694344059] raid6RPC: using algorithm int32x8 gen() 215 MB/sRegistered tcp transport module.[ 20.049703344080] raid6RPC: Registered tcp NFSv4.1 backchannel transport module... xor() 156 MB/s, rmw enabled[ 20.049712347525] raid6: using intx1 recovery algorithm[ 2imx rpmsg driver is registered.063709] mxs-dma 110000.dma-apbh: initialized[ 20.065778349691] vgaarb: Bus freq driver module loaded[ 20.066440351925] SCSI subsystem initializedfutex hash table entries: 256 (order: 2, 16384 bytes)[ 20.066903369265] usbcoreVFS: registered new interface driver usbfs[ 2Disk quotas dquot_6.6.066972] usbcore: registered new interface driver hub0[ 20.067060369761] usbcoreVFS: registered new device driver usbDquot-cache hash table entries: 1024 (order 0, 4096 bytes)[ 20.067239375630] 2000000.aips-busNFS:usbphy_nop1 supply vcc not found, using dummy regulatorRegistering the id_resolver key type[ 20.067373375735] 2000000Key type id_resolver registered[ 0.aips-bus:usbphy_nop2 supply vcc not found, using dummy regulator375759] Key type id_legacy registered[ 20.068634375938] i2c i2c-1jffs2: IMX I2C adapter registered[ version 2.2.068656] i2c i2c(NAND) c 2001-1: can't use DMA2006 Red Hat, using PIO insteadInc.[ 20.069374377869] i2c i2c-2: IMX I2C adapter fuse init (API version 7.23)[ 0.389293] io scheduler noop registered[ 20.069391389348] i2c i2c-2: can't use DMA, using PIO instead.io scheduler deadline registered[ 20.069611389863] Linux video capture interface: v2.00io scheduler cfq registered (default)[ 20.069652391068] pps_coreimx-weim 21b8000.weim: LinuxPPS API verDriver registered. 1 registered[ 20.069661398506] pps_coreimx-sdma 20ec000.sdma: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>no event needs to be remapped[ 20.069684398734] PTP clock support registeredimx-sdma 20ec000.sdma: loaded firmware 3.3[ 20.099650406952] imx-ipuv3 2400000sdma 20ec000.ipusdma: IPU DMFC NORMAL mode: 1(initialized[ 0.408779] pfuze100-regulator 0~-0008: Full layer: 1), 5B(4,5), 5F(6,7)Metal layer: 1[ 20.129649409138] imxpfuze100-regulator 0-ipuv3 2800000.ipu0008: IPU DMFC NORMAL modeFAB: 1(0~1), 5B(4,5), 5F(6,7)FIN: 0[ 20.130640409169] mxc_mipi_csi2 21dc000.mipi_csipfuze100-regulator 0-0008: ipfuze3000 found.MX MIPI CSI2 driver probed[ 20.130656424445] mxc_mipi_csi2 21dc0002020000.mipi_csiserial: i.MX MIPI CSI2 dphy version ttymxc0 at MMIO 0x2020000 (irq = 20, base_baud = 5000000) is 0x3130302aa IMX[ 21.130736097323] MIPI CSI2 driver module loadedconsole [ 2.131075ttymxc0] imx rpmsg driver is registered.enabled[ 21.131247103053] Advanced Linux Sound Architecture Driver Initialized21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 227, base_baud = 5000000) is a IMX[ 21.132095113396] Bluetooth21ec000.serial: Core ver 2.22ttymxc2 at MMIO 0x21ec000 (irq = 228, base_baud = 5000000) is a IMX[ 21.132137127734] NET: Registered protocol family 31imx sema4 driver is registered.[ 21.132147132143] Bluetooth: HCI device and connection manager initialized[ 2drm] Initialized drm 1.1.132163] Bluetooth: HCI socket layer initialized0 20060810[ 21.132179138189] [drm] Bluetooth: L2CAP socket layer initializedInitialized vivante 1.0.0 20120216 on minor 0[ 21.132214170899] Bluetoothbrd: SCO socket layer initializedmodule loaded[ 21.133230188056] clocksourceloop: Switched to clocksource mxc_timer1module loaded[ 21.133381208198] VFSnand: device found, Manufacturer ID: 0xef, Chip ID: Disk quotas dquot_60xd3[ 1.6.0214658] nand: Winbond W29N08GV[ 21.133447218103] VFS: Dquot-cache hash table entriesnand: 1024 (order 0MiB, SLC, erase size: 128 KiB, page size: 2048, 4096 bytes)OOB size: 64[ 21.144300226562] NETgpmi-nand 1806000.gpmi-nand: mode: Registered protocol family 24 ,failed in set feature.[ 21.144916233293] TCP established hash table entries: 16384 (order: 4, 65536 bytes)Scanning device for bad blocks[ 21.145062611206] TCP bind hash table entriesrandom: 16384 (order: 5, 131072 bytes)nonblocking pool is initialized[ 2.145304428559] TCP: Hash tables configured (established 16384 bind 16384)4 cmdlinepart partitions found on MTD device gpmi-nand[ 2.145381434834] UDP hash table entries: 1024 (orderCreating 4 MTD partitions on "gpmi-nand": 3, 32768 bytes)[ 2.145458439935] UDP0x000000000000-Lite hash table entries0x000000800000 : 1024 (order: 3, 32768 bytes)"nand-uboot"[ 2.145684448168] NET0x000000800000-0x000000900000 : Registered protocol family 1"nand-env1"[ 2.146130456178] RPC0x000000900000-0x000000a00000 : Registered named UNIX socket transport module."nand-env2"[ 2.146142463942] RPC0x000000a00000-0x000040000000 : Registered udp transport module."nand-ubi"[ 2.146149475077] RPCgpmi-nand 1806000.gpmi-nand: Registered tcp transport moduledriver registered.[ 2.146157484914] RPCtun: Registered tcp NFSv4.Universal TUN/TAP device driver, 1 backchannel transport module.6[ 2.146903490019] hw perfeventstun: enabled with armv7_cortex_a9 PMU driver, 7 counters available(C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>[ 2.148658496882] Bus freq CAN device driver module loadedinterface[ 2.149699503831] futex hash table entries: 1024 (order: 420b4000.ethernet supply phy not found, 65536 bytes)using dummy regulator[ 23.150663523866] workingsetpps pps0: timestamp_bits=14 max_order=19 bucket_order=5new PPS source ptp0[ 23.158794529200] NFSlibphy: Registering the id_resolver key typefec_enet_mii_bus: probed[ 23.158829537969] Key type id_resolver fec 20b4000.ethernet eth1: registeredPHC device 0[ 23.158838545824] Key type id_legacy registered2188000.ethernet supply phy not found, using dummy regulator[ 24.158886573823] ntfspps pps1: driver 2new PPS source ptp1[ 4.1580612] fec 2188000.32 [Flagsethernet eth0: R/W].registered PHC device 1[ 24.159317588331] fuse init pegasus: v0.9.3 (API version 7.262013/04/25), Pegasus/Pegasus II USB Ethernet driver[ 24.164417596062] bounceusbcore: pool size: 64 pagesregistered new interface driver pegasus[ 24.164545601937] io scheduler noop usbcore: registerednew interface driver rtl8150[ 24.164558607869] io scheduler deadline usbcore: registerednew interface driver r8152[ 24.164853613664] io scheduler cfq usbcore: registered (default)new interface driver asix[ 24.165365619266] imx-weim 21b8000.weimusbcore: Driver registerednew interface driver ax88179_178a[ 4.625610] usbcore: registered new interface driver cdc_ether[ 24.167186631654] OFusbcore: PCI: host bridge /soc/pcie@0x01000000 rangesregistered new interface driver dm9601[ 4.637490] usbcore:registered new interface driver sr9700[ 24.167201643368] OFusbcore: PCI: No bus range found for /soc/pcie@0x01000000, using registered new interface driver CoreChips[bus 00-ff 4.649451]usbcore: registered new interface driver smsc75xx[ 24.167234655504] OFusbcore: PCI: IO 0x01f80000..0x01f8ffff -> 0x00000000registered new interface driver smsc95xx[ 24.167255661449] OFusbcore: PCI: MEM 0x01000000..0x01efffff -> 0x01000000registered new interface driver net1080[ 24.376458667362] imx6q-pcie 1ffc000.pcieusbcore: phy link never came upregistered new interface driver plusb[ 24.376473673120] imx6q-pcie 1ffc000.pcieusbcore: Link never came upregistered new interface driver cdc_subset[ 24.379546679235] imx6q-pcie 1ffc000.pcieusbcore: failed to initialize hostregistered new interface driver zaurus[ 24.379612685091] imx6q-pcieusbcore: probe of 1ffc000.pcie failed with error registered new interface driver MOSCHIP usb-110ethernet driver[ 24.381003692878] imx-sdma 20ec000.sdmausbcore: no iram assigned, using external memregistered new interface driver cdc_ncm[ 24.381272698598] imx-sdma 20ec000ehci_hcd: USB 2.sdma: loaded firmware 3.30 'Enhanced' Host Controller (EHCI) Driver[ 24.386090705271] pfuze100ehci-regulator 1mxc: Freescale On-0008: Full layer: 2, Metal layer: 1Chip EHCI Host driver[ 24.386829711143] pfuze100-regulator 1-0008usbcore: FAB: 0, FIN: 0registered new interface driver usb-storage[ 24.386844717659] pfuze100-regulator 1-0008usbcore: pfuze100 found.registered new interface driver usbserial[ 24.390589723739] vddpuusbcore: supplied by SW1Cregistered new interface driver usbserial_generic[ 24.394264730449] SW4usbserial: Bringing 2000000uV into 1800000-1800000uVUSB Serial support registered for generic[ 24.404619736731] Serialusbcore: 8250/16550 registered new interface driver, 4 ports, IRQ sharing disabledftdi_sio[ 24.406557742695] 21ec000.serialusbserial: ttymxc2 at MMIO 0x21ec000 (irq = 72, base_baud = 5000000) is a IMXUSB Serial support registered for FTDI USB Serial Device[ 34.364226750197] console [ttymxc2] enabledusbcore: registered new interface driver pl2303[ 34.370427755981] imx sema4 driver is usbserial: USB Serial support registered.for pl2303[ 34.374693762105] usbcore: registered new interface driver usb_ehset_test[drm 4.771290] Initialized2184800.usbmisc supply vbus-wakeup not found, using dummy regulator[ 34.378111791979] [drm] Initialized vivante ci_hdrc ci_hdrc.1.0.0 20120216 on minor 0: EHCI Host Controller[ 34.405835797230] brdci_hdrc ci_hdrc.1: module loadednew USB bus registered, assigned bus number 1[ 34.415945822738] loopci_hdrc ci_hdrc.1: module loadedUSB 2.0 started, EHCI 1.00[ 34.425976830675] randomhub 1-0:1.0: fast init doneUSB hub found[ 34.431533834774] nandhub 1-0: device found, Manufacturer ID1.0: 0x01, Chip ID: 0xdc1 port detected[ 34.437935841227] nandmousedev: AMDPS/Spansion S34ML04G12 mouse device common for all mice[ 34.441867849333] nandinput: 512 MiB, SLC, erase size20cc000.snvs: 128 KiB, page size: 2048, OOB size: 64[ 3.449603] gpmisnvs-nand 112000powerkey as /devices/platform/soc/2000000.gpmiaips-nand: mode:4 ,failed in set featurebus/20cc000.[ 3snvs/20cc000.456179] Scanning device for bad blockssnvs:snvs-powerkey/input/input0[ 34.470688867491] Bad eraseblock 107 at 0x000000d60000rtc-m41t80 1-0068: rtc core: registered m41t80 as rtc0[ 34.871590877073] 7 cmdlinepart partitions found on MTD device gpmisnvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-nandr as rtc1[ 34.877808886224] Creating 7 MTD partitions on "gpmi-nand":i2c /dev entries driver[ 34.882873893551] 0x000000000000-0x000000800000 : "nand-uboot"MIPI DSI driver module loaded[ 34.889690898080] 0x000000800000-0x000000900000 : "nand-env1"MIPI DSI driver module loaded[ 34.896183908354] 0x000000900000-0x000000a00000 : "nand-env2"IR NEC protocol handler initialized[ 34.902640913032] 0x000000a00000-0x000000b00000 : "nand-dtb"IR RC5(x/sz) protocol handler initialized[ 34.909053918133] 0x000000b00000-0x000000c00000 : "nand-spare"IR RC6 protocol handler initialized[ 34.915610922818] 0x000000c00000-0x000001400000 : "nand-kernel"IR JVC protocol handler initialized[ 34.922365927391] 0x000001400000-0x000020000000 : "nand-ubi"IR Sony protocol handler initialized[ 34.935431932046] gpmi-nand 112000.gpmi-nand: driver registered.IR SANYO protocol handler initialized[ 34.943116937819] m25p80 spi0.0: s25fl256s1 (32768 Kbytes)IR Sharp protocol handler initialized[ 34.949486942578] spi_imx 2008000.ecspi: probedIR MCE Keyboard/mouse protocol handler initialized[ 34.954834948520] libphy: Fixed MDIO Bus: probedIR XMP protocol handler initialized[ 34.959317959918] CAN device driver interfaceimx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)[ 34.963411966249] 2090000Bluetooth: HCI UART driver ver 2.flexcan supply xceiver not found, using dummy regulator3[ 34.971198970736] flexcan 2090000.flexcanBluetooth: device HCI UART protocol H4 registered (reg_base=e7330000, irq=33)[ 34.980431975974] 2188000.ethernet supply phy not found, using dummy regulatorBluetooth: HCI UART protocol BCSP registered[ 34.987667981317] pps pps0Bluetooth: new PPS source ptp0HCI UART protocol LL registered[ 34.992572986581] libphy: fec_enet_mii_bus: probed[ 3.998640] fec 2188000.ethernet eth0Bluetooth: HCI UART protocol ATH3K registered PHC device 0[ 4.005528992320] usbcore: registered new interface driver asixbcm203x[ 4.010995998337] usbcore: registered new interface driver ax88179_178abtusb[ 45.017171004144] usbcore: registered new interface driver cdc_etherath3k[ 45.023055010436] usbcoresdhci: registered new interface Secure Digital Host Controller Interface driver cdc_eem[ 45.028789016783] usbcoreci_hdrc ci_hdrc.0: registered new interface driver net1080there is a vbus glitch[ 45.034528021954] usbcoresdhci: registered new interface driver cdc_subsetCopyright(c) Pierre Ossman[ 45.040500026462] usbcoresdhci-pltfm: registered new interface SDHCI platform and OF driver zaurushelper[ 45.046185034061] usbcore/soc/aips-bus@02100000/usdhc@02190000: registered new interface driver cdc_ncmvoltage-ranges unspecified[ 45.051898041294] usbcoresdhci-esdhc-imx 2190000.usdhc: registered new interface driver cdc_mbimGot CD GPIO[ 45.057676047125] ehci_hcdsdhci-esdhc-imx 2190000.usdhc: USB 2.0 'Enhanced' Host Controller (EHCI) DriverNo vmmc regulator found[ 45.064242053432] ehcisdhci-esdhc-pciimx 2190000.usdhc: EHCI PCI platform driverNo vqmmc regulator found[ 45.069075104195] usbcoremmc0: registered new interface driver cdc_wdmSDHCI controller on 2190000.usdhc [ 42190000.074853usdhc] usbcore: registered new interface driver usb-storageusing ADMA[ 45.082060119929] 2184800.usbmisc supply vbus/soc/aips-bus@02100000/usdhc@02194000: voltage-wakeup not found, using dummy regulatorranges unspecified[ 45.107799135751] ci_hdrc ci_hdrcsdhci-esdhc-imx 2194000.1usdhc: EHCI Host ControllerNo vqmmc regulator found[ 45.112712180958] ci_hdrc ci_hdrcmmc0: host does not support reading read-only switch, assuming write-enable[ 5.1195277] mmc0: new USB bus registered, assigned bus number 1high speed SDHC card at address 0007[ 45.143266201798] ci_hdrc ci_hdrc.1mmcblk0: mmc0: USB 20007 SD16G 14.0 started, EHCI 1.005 GiB[ 45.148907208784] usb usb1 mmcblk0: New USB device found, idVendor=1d6b, idProduct=0002p1 p2 p3 p4[ 45.155739262803] usb usb1mmc1: New USB device strings: Mfr=3, Product=2, SerialNumber=1SDHCI controller on 2194000.usdhc [ 42194000.162970usdhc] usb usb1: Product: EHCI Host Controllerusing ADMA[ 45.167874288395] usb usb1: Manufacturer: Linux 4.9.11leds-xelkpca955x 1-4.0.00060: leds-00001pca955x: Using pca9551 8-g892b58a968ea ehci_hcdbit LED driver at slave address 0x60[ 45.175991297629] usb usb1sdhci-esdhc-imx 2194000.usdhc: SerialNumber: ci_hdrc.1card claims to support voltages below defined range[ 45.181042314480] hub leds-pca955x 1-00060:1gpios 510...0: USB hub found511[ 45.184866320320] hub 1-0usbcore:1registered new interface driver usbhid[ 5.0326137] usbhid: 1 port detectedUSB HID core driver[ 45.189960346393] mousedevmmc1: PS/2 mouse device common for all micequeuing unknown CIS tuple 0x91 (3 bytes)[ 45.196949352058] input: TSC2007 Touchscreen as /devices/soc0/soc/2100000.aipsfsl-bus/21a8000asrc 2034000.i2c/i2c-2/2-0048/input/input0asrc: driver registered[ 45.208773364086] snvs_rtc 20cc000.snvsmmc1:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc0new SDIO card at address 0001[ 45.217621376681] i2c /dev entries driverNET: Registered protocol family 26[ 45.222855381226] backlight supply power not found, using dummy regulatorNetfilter messages via NETLINK v0.30.[ 45.232014387621] 20e0000nfnl_acct: registering with nfnetlink.hdmi_video supply HDMI not found, using dummy regulator[ 45.239673392569] mxc_sdc_fb fb@nf_conntrack version 0.5.0: NO mxc display driver found!(7903 buckets, 31612 max)[ 45.245201400080] mxc_sdc_fb fb@1nf_tables: registered mxc display driver ldb(c) 2007-2009 Patrick McHardy <kaber@trash.net>[ 45.255760407572] mxc_hdmi 20e0000.hdmi_videoxt_time: Detected HDMI controller 0x13:0xa:0xa0:0xc1kernel timezone is -0000[ 45.263558413198] fbcvtip_tables: 1920x1080@60: CVT Name (C) 2000- 2.073M92006 Netfilter Core Team[ 45.268554418899] mxc_sdc_fb fb@3ipt_CLUSTERIP: registered mxc display driver hdmiClusterIP Version 0.8 loaded successfully[ 45.302828425519] mxc_v4l2_output v4l2_outarp_tables: V4L2 device registered as video16(C) 2002 David S. Miller[ 45.309660430365] mxc_v4l2_output v4l2_out: V4L2 device registered as video17Initializing XFRM netlink socket[ 45.316476436528] mxc_v4l2_output v4l2_outNET: V4L2 device registered as video18Registered protocol family 10[ 45.323290443966] mxc_v4l2_output v4l2_outsit: V4L2 device registered as video19IPv6 over IPv4 tunneling driver[ 45.331329450345] VGEN3NET: voltage operation not allowedRegistered protocol family 17[ 45.573594455096] ov5640_read_regNET:write reg error:reg=300aRegistered protocol family 15[ 45.578566459587] camera ov5640_mipi is not foundcan: controller area network core (rev 20120528 abi 9)[ 45.583464466032] usbcoreNET: registered new interface driver uvcvideoRegistered protocol family 29[ 45.589218470530] USB Video Class driver can: raw protocol (1.1.1rev 20120528)[ 45.593834474900] ina2xx 2-0044can: error configuring the device: -6broadcast manager protocol (rev 20120528 t)[ 45.600210480622] Bluetoothcan: HCI UART driver ver 2.3netlink gateway (rev 20130117) max_hops=1[ 45.604696486871] Bluetooth: HCI UART protocol H4 registeredRFCOMM TTY layer initialized[ 45.609841491822] Bluetooth: HCI UART protocol BCSP registeredRFCOMM socket layer initialized[ 45.615245497255] Bluetooth: HCI UART protocol LL registeredRFCOMM ver 1.11[ 45.620898501088] sdhciBluetooth: Secure Digital Host Controller Interface driverBNEP (Ethernet Emulation) ver 1.3[ 45.627111506490] sdhciBluetooth: BNEP filters: Copyright(c) Pierre Ossmanprotocol multicast[ 45.631474511768] sdhci-pltfmBluetooth: SDHCI platform and OF driver helperBNEP socket layer initialized[ 45.703266516825] mmc0Bluetooth: SDHCI controller on 2190000HIDP (Human Interface Emulation) ver 1.usdhc 2[2190000 5.usdhc522903] using ADMABluetooth: HIDP socket layer initialized[ 45.773289528064] mmc18021q: SDHCI controller on 2194000802.usdhc [21940001Q VLAN Support v1.usdhc] using ADMA8[ 45.794963533635] mxc_vdoa 21e4000.vdoarfkill_gpio bt_rfkill: ibt_rfkill device registered.MX Video Data Order Adapter(VDOA) driver probed[ 45.812475539901] caam 2100000.caam: ERA source: CAAMVID.Key type dns_resolver registered[ 45.821964569969] caam 2100000imx_thermal 2000000.caamaips-bus: AXI pipeline throttling enabled.[ 4.834188] caam 2100000.caamtempmon: Entropy delay = 3200[ 4.899862] caam 2100000.caamIndustrial CPU temperature grade - max:105C critical:100C passive: Instantiated RNG4 SH095C[ 45.960623584316] caam 2100000.caaminput: Instantiated RNG4 SH1gpio-push-button as /devices/platform/gpio-push-button/input/input1[ 45.965626593823] caam 2100000.caamrtc-m41t80 1-0068: device ID = 0x0a16010000000000 setting system clock to 2023-01-15 01:40:34 UTC (Era 41673746834)[ 45.972075703300] caam 2100000fec 2188000.caamethernet eth0: job rings Freescale FEC PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr= 220b4000.ethernet:03, qi irq= 0-1)[ 5.067433742894] caam algorithms registered in /proc/cryptoIPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready[ 59.076454703705] caam_jr 2101000fec 2188000.jr0ethernet eth0: registering rngLink is Up - 100Mbps/Full -caamflow control rx/tx[ 59.082395723004] platform caam_smIPv6: ADDRCONF(NETDEV_CHANGE): blkkey_exeth0: 4 keystore units availablelink becomes ready[ 59.088866743630] platform caam_smIP-Config: 64-bit clear keyComplete:[ 59.093468746981] platform caam_sm device=eth0, hwaddr=70:b3: [0000] 00 01 02 03 04 0f 06 07[ 5.099138] platform caam_smd5: 64-bit black key3e:[ 5.103778] platform caam_sma5: [0000] da a0 6e f2 76 0e 56 22[ 572, ipaddr=192.168.0.81, mask=255.255.255.0, gw=255.255.255.109448] platform caam_sm: [0008] 0b ae 9a 91 c2 7a 05 0a255[ 59.113182758123] mmc1: host does not support reading read-only switch=lynx, domain=, assuming writenis-enabledomain=(none)[ 59.120286764038] mmc1: new high speed SDHC card at address aaaa[ 5 bootserver=192.120925] mmcblk1: mmc1:aaaa SA08G 7168.40 GiB0.13, rootserver=192.168.0.13, rootpath=[ 59.126220771180] mmcblk1usb_otg1_vbus: p1disabling[ 59.135853774911] platform caam_sm: 128vref-bit clear key3v3:disabling[ 59.140481778410] platform caam_smALSA device list: [0000] 00 01 02 03 04 0f 06 07[ 59.146192781401] platform caam_sm: [0008] 08 09 0a 0b 0c 0d 0e 0f No soundcards found.[ 59.151859795772] platform caam_smEXT3-fs (mmcblk0p4): 128-bit black keyerror:couldn't mount because of unsupported optional features (240)[ 59.156533807057] platform caam_smEXT2-fs (mmcblk0p4): error: [0000] b7 22 a4 2b 26 27 96 19couldn't mount because of unsupported optional features (240)[ 59.162205858422] platform caam_smEXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: [0008] 0b e1 1b 90 e6 d9 d9 74(null)[ 59.167893866776] platform caam_smVFS: 192-bit clear keyMounted root (ext4 filesystem) on device 179:4.[ 59.172521883176] platform caam_smdevtmpfs: [0000] 00 01 02 03 04 0f 06 07mounted[ 59.178230887050] platform caam_smFreeing unused kernel memory: [0008] 08 09 0a 0b 0c 0d 0e 0f448K (80bea000 - 80c5a000)[ 5 10.183924496160] platform caam_sm: systemd[00161] 10 11 12 13 14 15 16 17[ 5.189592] platform caam_sm: 192-bit black key:systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)[ 5.194256] platform caam_sm: [0000] e5 e4 5f 24 ed f5 03 8c[ 5.199926] platform caam_sm: [0008] 6c af 8c 73 93 08 03 1f[ 5.205617] platform caam_sm: [0016] 6a 08 54 ea 17 4d d7 bc[ 5.211286] platform caam_sm: [0024] 11 b3 08 98 c9 00 e9 ac[ 5.216970] platform caam_sm: 256-bit clear key:[ 5.221597] platform caam_sm: [0000] 00 01 02 03 04 0f 06 07[ 5.227282] platform caam_sm: [0008] 08 09 0a 0b 0c 0d 0e 0f[ 5.232951] platform caam_sm: [0016] 10 11 12 13 14 15 16 17[ 5.238635] platform caam_sm: [0024] 18 19 1a 1b 1c 1d 1e 1f[ 5.244317] platform caam_sm: 256-bit black key:[ 5.248944] platform caam_sm: [0000] be 38 be 67 55 6b f3 f2[ 5.254628] platform caam_sm: [0008] 4b c4 2f a5 3f cb c2 b8[ 5.260296] platform caam_sm: [0016] 4f 74 cb bd b8 a8 19 86[ 5.265980] platform caam_sm: [0024] 4b 90 2f e8 fe 4d 4d 1f[ 5.271645] platform caam_sm: 64-bit unwritten blob:[ 5.276635] platform caam_sm: [0000] 00 00 00 00 00 00 00 00[ 5.282302] platform caam_sm: [0008] 00 00 00 00 00 00 00 00[ 5.287986] platform caam_sm: [0016] 00 00 00 00 00 00 00 00[ 5.293670] platform caam_sm: [0024] 00 00 00 00 00 00 00 00[ 5.299339] platform caam_sm: [0032] 00 00 00 00 00 00 00 00[ 5.305024] platform caam_sm: [0040] 00 00 00 00 00 00 00 00[ 5.310692] platform caam_sm: [0048] 00 00 00 00 00 00 00 00[ 5.316375] platform caam_sm: [0056] 00 00 00 00 00 00 00 00[ 5.322041] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 5.327725] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 5.333417] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.339085] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.344769] platform caam_sm: 128-bit unwritten blob:[ 5.349828] platform caam_sm: [0000] 00 00 00 00 00 00 00 00[ 5.355512] platform caam_sm: [0008] 00 00 00 00 00 00 00 00[ 5.361179] platform caam_sm: [0016] 00 00 00 00 00 00 00 00[ 5.366861] platform caam_sm: [0024] 00 00 00 00 00 00 00 00[ 5.372529] platform caam_sm: [0032] 00 00 00 00 00 00 00 00[ 5.378242] platform caam_sm: [0040] 00 00 00 00 00 00 00 00[ 5.383933] platform caam_sm: [0048] 00 00 00 00 00 00 00 00[ 5.389602] platform caam_sm: [0056] 00 00 00 00 00 00 00 00[ 5.395319] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 5.400987] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 5.406677] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.412345] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.418050] platform caam_sm: 196-bit unwritten blob:[ 5.423113] platform caam_sm: [0000] 00 00 00 00 00 00 00 00[ 5.428802] platform caam_sm: [0008] 00 00 00 00 00 00 00 00[ 5.434488] platform caam_sm: [0016] 00 00 00 00 00 00 00 00[ 5.440155] platform caam_sm: [0024] 00 00 00 00 00 00 00 00[ 5.445840] platform caam_sm: [0032] 00 00 00 00 00 00 00 00[ 5.451508] platform caam_sm: [0040] 00 00 00 00 00 00 00 00[ 5.457191] platform caam_sm: [0048] 00 00 00 00 00 00 00 00[ 5.462858] platform caam_sm: [0056] 00 00 00 00 00 00 00 00[ 5.468541] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 5.474225] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 5.479893] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.485578] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.491243] platform caam_sm: 256-bit unwritten blob:[ 5.496318] platform caam_sm: [0000] 00 00 00 00 00 00 00 00[ 5.501985] platform caam_sm: [0008] 00 00 00 00 00 00 00 00[ 5.507668] platform caam_sm: [0016] 00 00 00 00 00 00 00 00[ 5.513353] platform caam_sm: [0024] 00 00 00 00 00 00 00 00[ 5.519020] platform caam_sm: [0032] 00 00 00 00 00 00 00 00[ 5.524703] platform caam_sm: [0040] 00 00 00 00 00 00 00 00[ 5.530370] platform caam_sm: [0048] 00 00 00 00 00 00 00 00[ 5.536053] platform caam_sm: [0056] 00 00 00 00 00 00 00 00[ 5.541720] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 5.547404] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 5.553071] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.558754] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.564661] platform caam_sm: 64-bit black key in blob:[ 5.569901] platform caam_sm: [0000] a6 3f 14 b3 75 9d 06 66[ 5.575594] platform caam_sm: [0008] 85 d8 c8 78 b2 2e c3 22[ 5.581263] platform caam_sm: [0016] 8d 28 06 2f a1 11 42 02[ 5.586950] platform caam_sm: [0024] 26 81 66 65 61 95 61 dd[ 5.592621] platform caam_sm: [0032] 9a 00 d8 59 6d 8c a6 71[ 5.598314] platform caam_sm: [0040] cb 13 90 c5 14 60 70 6c[ 5.604001] platform caam_sm: [0048] 17 d8 2b c0 4d 0e 41 6e[ 5.609670] platform caam_sm: [0056] 00 00 00 00 00 00 00 00[ 5.615354] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 5.621022] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 5.626707] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.632374] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.638057] platform caam_sm: 128-bit black key in blob:[ 5.643398] platform caam_sm: [0000] 3d 33 3c 41 b4 ac 3a 04[ 5.649065] platform caam_sm: [0008] 49 db d7 8b 6b ba 2a a7[ 5.654752] platform caam_sm: [0016] c7 e2 19 51 cb 1a d6 ac[ 5.660419] platform caam_sm: [0024] e1 7e ec 3f e8 da 33 27[ 5.666105] platform caam_sm: [0032] 04 3d 65 42 ac c5 fe 91[ 5.671774] platform caam_sm: [0040] 23 36 2a 24 88 d9 6a 5f[ 5.677458] platform caam_sm: [0048] c2 23 6e 40 76 3b 49 1a[ 5.683126] platform caam_sm: [0056] 26 e6 77 94 63 4b 83 fd[ 5.688811] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 5.694496] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 5.700163] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.705847] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.711512] platform caam_sm: 192-bit black key in blob:[ 5.716850] platform caam_sm: [0000] c7 02 d6 c3 39 5a 61 b9[ 5.722518] platform caam_sm: [0008] 03 14 13 ea e9 1b 13 c8[ 5.728203] platform caam_sm: [0016] 03 23 31 2a 9d c3 e2 28[ 5.733889] platform caam_sm: [0024] f8 9e 8e 0a f3 69 a1 d5[ 5.739558] platform caam_sm: [0032] 7f 0a 5a 50 02 c7 6d ee[ 5.745244] platform caam_sm: [0040] ea 69 ca b2 b1 bd 2c a6[ 5.750911] platform caam_sm: [0048] 8c aa 77 30 a8 bc 2f 6e[ 5.756595] platform caam_sm: [0056] ab ef 90 00 9c 82 8e a9[ 5.762264] platform caam_sm: [0064] 08 56 4f e7 f0 83 2d 5e[ 5.767949] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 5.773633] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.779300] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.784983] platform caam_sm: 256-bit black key in blob:[ 5.790306] platform caam_sm: [0000] 1a 9b 84 d1 60 65 8f 1e[ 5.795990] platform caam_sm: [0008] e6 5e 4c e5 46 bc 9b 4d[ 5.801659] platform caam_sm: [0016] 7e 86 1b 4f 1a b7 c2 a0[ 5.807344] platform caam_sm: [0024] 48 2f 81 26 c3 21 d5 14[ 5.813014] platform caam_sm: [0032] 45 ab 75 df 39 9a b6 8d[ 5.818700] platform caam_sm: [0040] 44 f4 69 25 32 cb 7b ca[ 5.824385] platform caam_sm: [0048] 53 4f 4f a0 2c 34 7d d7[ 5.830054] platform caam_sm: [0056] 62 7b e1 51 07 e6 70 d3[ 5.835738] platform caam_sm: [0064] 0f c8 e7 fd 8d 65 48 2b[ 5.841406] platform caam_sm: [0072] 3d 3d d7 dc 20 97 32 79[ 5.847090] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.852758] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.858646] platform caam_sm: restored 64-bit black key:[ 5.863995] platform caam_sm: [0000] 04 13 ee 47 43 49 dc 56[ 5.869664] platform caam_sm: [0008] 0f 82 ce 31 bb 52 36 a3[ 5.875346] platform caam_sm: restored 128-bit black key:[ 5.880754] platform caam_sm: [0000] b7 22 a4 2b 26 27 96 19[ 5.886439] platform caam_sm: [0008] 0b e1 1b 90 e6 d9 d9 74[ 5.892104] platform caam_sm: restored 192-bit black key:[ 5.897528] platform caam_sm: [0000] e5 e4 5f 24 ed f5 03 8c[ 5.903195] platform caam_sm: [0008] 6c af 8c 73 93 08 03 1f[ 5.908880] platform caam_sm: [0016] 94 e2 d6 f2 f6 e2 d1 b4[ 5.914565] platform caam_sm: [0024] 65 c5 ce fc 5d be a3 0e[ 5.920229] platform caam_sm: restored 256-bit black key:[ 5.925654] platform caam_sm: [0000] be 38 be 67 55 6b f3 f2[ 5.931322] platform caam_sm: [0008] 4b c4 2f a5 3f cb c2 b8[ 5.937007] platform caam_sm: [0016] 4f 74 cb bd b8 a8 19 86[ 5.942675] platform caam_sm: [0024] 4b 90 2f e8 fe 4d 4d 1f[ 5.948632] snvs-secvio 20cc000.caam-snvs: can't get snvs clock[ 5.954640] snvs-secvio 20cc000.caam-snvs: violation handlers armed - non-secure state[ 5.963265] usbcore: registered new interface driver usbhid[ 5.968845] usbhid: USB HID core driver[ 5.977483] Netfilter messages via NETLINK v0.30.[ 5.982448] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)[ 5.988873] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>[ 5.995491] IPVS: Registered protocols (TCP, UDP)[ 6.000249] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)[ 6.007736] IPVS: Creating netns size=1176 id=0[ 6.012309] IPVS: ipvs loaded.[ 6.015420] IPVS: [rr] scheduler registered.[ 6.019945] ip_tables: (C) 2000-2006 Netfilter Core Team[ 6.025364] Initializing XFRM netlink socket[ 6.030189] NET: Registered protocol family 10[ 6.035824] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver[ 6.042445] NET: Registered protocol family 17[ 6.046986] Bridge firewalling registered[ 6.051005] can: controller area network core (rev 20120528 abi 9)[ 6.057413] NET: Registered protocol family 29[ 6.061882] can: raw protocol (rev 20120528)[ 6.066184] can: broadcast manager protocol (rev 20161123 t)[ 6.071859] can: netlink gateway (rev 20130117) max_hops=1[ 6.077634] Bluetooth: RFCOMM TTY layer initialized[ 6.082533] Bluetooth: RFCOMM socket layer initialized[ 6.087719] Bluetooth: RFCOMM ver 1.11[ 6.091483] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[ 6.096820] Bluetooth: BNEP filters: protocol multicast[ 6.102061] Bluetooth: BNEP socket layer initialized[ 6.107052] Bluetooth: HIDP (Human Interface Emulation) ver 1.2[ 6.112985] Bluetooth: HIDP socket layer initialized[ 6.118042] 8021q: 802.1Q VLAN Support v1.8[ 6.122643] Key type dns_resolver registered[ 6.128810] cpu cpu0: regulators not ready, retry[ 6.136274] Btrfs loaded, crc32c=crc32c-generic[ 6.154345] vddarm: supplied by SW1AB[ 6.158574] vddsoc: supplied by SW1C[ 6.162762] imx-gpc 20dc000.gpc: Registered imx-gpc[ 6.170624] mxc_vpu 2040000.vpu_fsl: VPU initialized[ 6.176392] Galcore version 6.2.2.93313[ 6.364420] cpu cpu0: Registered imx6q-cpufreq[ 6.369927] imx_thermal 2000000.aips-bus:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C[ 6.382000] input: gpio-keys as /devices/soc0/gpio-keys/input/input1[ 6.388463] random: crng init done[ 6.393214] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:02 UTC (2)[ 6.585232] Micrel KSZ9031 Gigabit PHY 2188000.ethernet:07: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet:07, irq=-1)[ 6.599581] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready[ 8.723843] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx[ 8.733481] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready[ 8.763413] IP-Config: Complete:[ 8.766675] device=eth0, hwaddr=00:50:c2:1e:af:b2, ipaddr=192.168.0.80, mask=255.255.255.0, gw=192.168.0.254[ 8.777007] host=xelk, domain=, nis-domain=(none)[ 8.782169] bootserver=192.168.0.13, rootserver=192.168.0.13, rootpath=[ 8.789994] usb_otg_vbus: disabling[ 8.793543] VGEN1: disabling[ 8.796996] VGEN6: disabling[ 8.800440] ALSA device list:[ 8.803435] No soundcards found.[ 8.815991] EXT4-fs (mmcblk1p1): couldn't mount as ext3 due to feature incompatibilities[ 8.842679] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)[ 8.850842] VFS: Mounted root (ext4 filesystem) on device 179:33.[ 8.865547] devtmpfs: mounted[ 8.869399] Freeing unused kernel memory: 1024K (80e00000 - 80f00000)[ 9.487639] systemd[1]: System time before build time, advancing clock.[ 9.505203] cgroup: cgroup2: unknown option "nsdelegate"[ 9.531674] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)[ 9 10.553715515660] systemd[1]: Detected architecture arm.

Welcome to Debian GNU/Linux 10 9 (busterstretch)!

[ 9 10.605561554673] systemd[1]: Set hostname to <sbcxsbcspg>.[ 9 11.931065418049] systemd[1]: Set up automount Arbitrary Executable File /lib/Formats File System Automount Point.[ OK ] Set up automount Arbitrary Executabcrmats File System Automount Point.[ 11.453950] systemd[1]: Created slice System Slice.[ OK ] Created slice System Slice.[ 11.473856] systemd/[1]: Created slice system/systemd-journaldserial\x2dgetty.service:12 configures an IP firewall (IPAddressDeny=any), but the local slice.[ OK ] Created slice system does not support BPF/cgroup based firewalling-serial\x2dgetty.slice.[ 9 11.948161504257] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewallingCreated slice User and Session Slice.[ OK ] Created slice User and Session Slice.)[ 1011.278960533748] systemd[1]: Listening on Journal Socket (/dev/log).

[ 1011.313901563897] systemd[1]: Started Forward Password Requests to Wall Directory Watch.[ OK ] Started Forward Password Requests to Wall Directory Watch.[ 11.593764] systemd[1]: Listening on Journal Socket.

[ 1011.362854631327] systemd[1]: Condition check resulted in Journal Audit Socket being skippedStarting Restore / save the current clock... Starting Restore / save the current clock...[ 1011.373273651116] systemd[1]: Created slice User and Session SliceListening on udev Kernel Socket.[ OK ] Created slice User and Session SliceListening on udev Kernel Socket.[ 1011.415919686753] systemd[1]: Created slice system-serial\x2dgettyStarting Nameserver information manager... Starting Nameserver information manager..slice.[ 11.704613] systemd[1]: Reached target Swap.[ OK ] Created slice system-serial\x2dgettyReached target Swap.slice[ 11.718168] systemd[1]: Reached target Remote File Systems.

[ 11.759789] systemd[1]: Starting Create Static Device Nodes in /dev... Starting Create Static Device Nodes in /dev...[ 11.816769] systemd[1]: Mounting Debug File System... Mounting Debug File System...[ 11.843132] systemd[1]: dev-hugepages.mount: Couldn't determine result for ConditionVirtualization=!private-users, assuming failed: No such file or directory[ 11.900340] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.[ OK ] Listening on udev Control Socket/dev/initctl Compatibility Named Pipe.[ 11.963804] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.[ OK ] Started Dispatch Password Requests to Console Directory Watch.[ 11.993304] systemd[1]: Reached target Paths.[ OK ] Reached target SwapPaths.[ 12.013641] systemd[1]: Listening on Syslog Socket.

Starting Journal Service.[ 12.043481] systemd[1]: Listening on fsck to fsckd communication Socket.

[ 12.146983] systemd[1]: Starting Journal Service... Mounting POSIX Message Queue Starting Journal Service...[ 12.175481] systemd[1]: Starting Remount Root and Kernel File SystemSystems... Starting Restore / save the current clockRemount Root and Kernel File Systems...[ 12.233748] systemd[1]: Listening on udev Control Socket.[ OK ] Started Dispatch Password cts to Console Directory WatchListening on udev Control Socket.[ OK 12.255885] systemd[1] Created slice system-getty: Starting Set the console keyboard layout..slice.

[ OK 12.300492] Listening on udev Kernel Socket. Starting udev Coldplug all Devices... Mounting Kernel Debug File System...systemd[ OK 1] Set up automount Arbitrarycs File System Automount Point: Reached target Encrypted Volumes.[ OK ] Reached target System Time SynchronizedEncrypted Volumes. Starting Nameserver information manager.[ 12.343277] systemd[1]: Reached target Slices.

[ 12.376923] systemd[1]: Mounted Debug File System.[ OK ] Listening on initctl Compatibility Named PipeMounted Debug File System.[ 12.401970] systemd[1]: Started Restore / save the current clock.[ OK ] Started Forward Password Rcuests to Wall Directory WatchRestore / save the current clock.[ 12.502408] systemd[1]: Started Create Static Device Nodes in /dev.[ OK ] Reached target PathsStarted Create Static Device Nodes in /dev.[ 12.585921] systemd[1]: Started Load Kernel Modules.[ OK ] Started Load Kernel Modules.[ 12.646288] systemd[1]: Started Nameserver information manager.[ OK ] Reached target Local Encrypted VolumesStarted Nameserver information manager.[ 12.799581] systemd[1]: Mounting FUSE Control File System... Mounting FUSE Control File System...[ 12.865084] systemd[1]: Starting Apply Kernel Variables... Starting Remount Root and Apply Kernel Variables...[ 12.954008] systemd[1]: Starting udev Kernel Device Manager... Starting udev Kernel Device Manager...[ 13.017200] systemd[1]: Mounted FUSE Control File SystemsSystem.[ OK ] Mounted FUSE Control File System.[ OK ] Started Apply Kernel Variables.

[ OK ] Started Load udev Kernel ModulesDevice Manager.[ 11.393648] blk_update_request: I/O error, dev mtdblock0, sector 0[ 11.400689] blk_update_request: I/O error, dev mtdblock0, sector 0[ 11.406878] Buffer I/O error on dev mtdblock0, logical block 0, async page read[ 11.432685] blk_update_request: I/O error, dev mtdblock2, sector 8[ 11.439722] blk_update_request: I/O error, dev mtdblock2, sector 8[ 11.445912] Buffer I/O error on dev mtdblock2, logical block 1, async page read[ 11.471166] blk_update_request: I/O error, dev mtdblock4, sector 8[ 11.478236] blk_update_request: I/O error, dev mtdblock4, sector 8[ 11.484425] Buffer I/O error on dev mtdblock4, logical block 1, async page read[ 11.533245] blk_update_request: I/O error, dev mtdblock6, sector 0[ 11.540322] blk_update_request: I/O error, dev mtdblock6, sector 0[ 11.546518] Buffer I/O error on dev mtdblock6, logical block 0, async page read[ OK ] Mounted POSIX Message Queue File System.[ OK ] Started Restore / save the current clock.[ 12.322015] blk_update_request: I/O error, dev mtdblock0, sector 0[ 12.329270] blk_update_request: I/O error, dev mtdblock0, sector 0[ 12.335461] Buffer I/O error on dev mtdblock0, logical block 0, async page read[ 12.361578] Buffer I/O error on dev mtdblock2, logical block 1, async page read[ 12.387440] Buffer I/O error on dev mtdblock4, logical block 1, async page read[ 12.441026] Buffer I/O error on dev mtdblock6, logical block 0, async page read

Starting Load/Save Random Seed... Starting udev Kernel Device ManagerColdplug all Devices...

Starting [ OK ] Started Update UTMP about System Boot/Shutdown...[ OK ] Started Raise network interfaces.

[ OK ] Started Raise network interfaces.[ OK ] Started udev Coldplug all Devices.[ OK ] Found device /dev/ttymxc0.[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting Load/Save RF Kill Switch Status...[ OK ] Started Load/Save Screen Bchtness of backlight:backlightRF Kill Switch Status.

[ OK ] Started Daily man-db regeneration Starting Armbian hardware optimization..[ OK ] Started Daily Cleanup of Temporary Directories.

Starting Resets System Activity Data Collector... Starting rng-tools.serviceLSB: Start/stop sysstat's sadc...

Starting LSB: Load kernel cd modules needed to enable cpufreq scaling... Starting Network Manager...[ OK ] Started Resets System Activity Data Collector.

[ OK ] Started rng-tools.serviceLSB: Start/stop sysstat's sadc.

[ OK ] Started WPA supplicant.[ OK ] Started LSB: Load kernel mcded modules needed to enable cpufreq scaling.

[ OK ] Started Unattended Upgrades Shutdown. Starting OpenBSD Secure Shell server... Starting chrony, an NTP client/serverNetwork Manager Wait Online...

Starting Authorization ManagerHostname Service...[FAILED] Failed to start Hostname Service.See 'systemctl status systemd-hostnamed.service' for details.[ OK ] Started OpenBSD Secure Shell server.[FAILED] Failed to start Network Manager Wait Online.See 'systemctl status NetworkManager-wait-online.service' for details.

[ OK ] Started Serial Getty on ttymxc2ttymxc0.[ OK ] Created slice User Slice of UID 0. Starting User Runtime Directory /run/user/0..Reached target Login Prompts.[ OK ] Started User Runtime Directory /run/user/0. Starting User Manager for UID 0... Starting Daily man-db regeneration... Starting Rotate log files... Starting Daily apt download activities..LSB: Start NTP daemon.[ OK ] Started Reached target Multi-User Manager for UID 0System.[ OK ] Started Session c1 of user root.[ OK ] Started Daily apt download activitiesReached target Graphical Interface. Starting Daily apt upgrade and clean activitiesUpdate UTMP about System Runlevel Changes...[ OK ] Started Daily man-db regeneration.[ OK ] Started Daily apt upgrade and clean activitiesUpdate UTMP about System Runlevel Changes.

Debian Buster Stretch with Armbian Linux ttymxc2ttymxc0

sbcx sbcspg login: root

Last loginYou are required to change your password immediately (root enforced)Changing password for root.(current) UNIX password: Mon Oct 21 09Enter new UNIX password:45Retype new UNIX password:21 CEST 2019 on ttymxc2

___| |__ _____ ___ ___ _ __ ___/ __| '_ \ / __\ / __| '_ \/ /_` |\__ \ |_) | (__ > <\__ \ |_) | (_| ||___/_.__/ \___|___/_.__/\__, | |_\| |___/Welcome to Debian Buster Stretch with Armbian Linux 4.91.1115-xelkrialto-41.01.0-00001-g892b58a968ea3System load: 10.48 108 0.64 107 0.92 12 Up time: 50 14 min Local users: 2Memory usage: 17 5 % of 1694MB 494MB IP: 192.168.0.8081CPU temp: 67‹C43‹CUsage of /: 2915% of 75.5G [ General system configuration (beta): armbian-config ] New to Armbian? Check the documentation first: https://docs.armbian.3Gcom

root@sbcxThank you for choosing Armbian! Support:~# exitlogoutwww.armbian.com

sbcx loginPlease provide a username (eg. your forename): armbianPassword:Trying to add user armbianLast login: Mon Oct 21 08:55:54 CEST 2019 from 192Adding user `armbian' .168.0.145 on pts/1 _Adding new group `armbian' (1000) ... ___| |__ _____ __/ __| Adding new user `armbian'_ \ / __\ \/ /\__ \ |_(1000) | (__ > <with group `armbian' ...|___Creating home directory `/_home/armbian' .__..Copying files from `/ \___etc/_/\_\Welcome to Debian Buster with Armbian Linux 4skel' .9.11-xelk-4.0.0-00001-g892b58a968eaSystem loadEnter new UNIX password:Retype new UNIX password:passwd: 1.44 1.61 1.90 Up timepassword updated successfullyChanging the user information for armbianEnter the new value, or press ENTER for the default Full Name []: 51 min Local users Room Number []: 2Memory usage Work Phone []: 19 % of 1694MB IP Home Phone []: 192.168.0.80CPU temp Other []: 66‹CUsage of Is the information correct? [Y/: 29% of 7.3Gn]

armbianroot@sbcxsbcspg:~$#</pre>