Changes

===Full bootstrap Bootstrap process===

U-Boot 2016.03-rialto-1.1.2 (Jan 17 2019 - 15:10:28 +0100), Build: jenkins-Rialto_U-Boot-10 CPU: Freescale i.MX6UL rev1.2 528 MHz (running at 396 MHz)CPU: Industrial temperature grade (-40C to 105C) at 36CReset cause: POREnvironment: NANDI2C: readyDRAM: 512 MiBRelocating to 9ff1c000, new gd at 9eefbeb8, sp at 9eefbe90PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11NAND: 1024 MiBMMC: FSL_SDHC: 0In: serialOut: serialErr: serialswitch to partitions #0, OKmmc0 is current deviceSOM ConfigID#: 00000022SOM UniqueID#: ee6b78bb:1e08a9d4CB ConfigID#: 00000046CB UniqueID#: 00000000:00000000Board: MX6UL RialtoNet: FEC0Normal BootHit any key to stop autoboot: 0=> run net_mmcFEC0 Waiting for PHY auto negotiation to complete...... doneUsing FEC0 deviceTFTP from server 192.168.0.13; our IP address is 192.168.0.81Filename 'rialto/linux/rialto-1.1.3_uImage'.Load address: 0x80800000Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 819.3 KiB/sdoneBytes transferred = 7170152 (6d6868 hex)Using FEC0 deviceTFTP from server 192.168.0.13; our IP address is 192.168.0.81Filename 'rialto/linux/rialto-1.1.3_imx6ul-lynx-som0022-cb0046.dtb'.Load address: 0x83000000Loading: ####### 540 KiB/sdoneBytes transferred = 33793 (8401 hex)FDT: override 'som_uniqueid' with 'ee6b78bb:1e08a9d4'FDT: override 'cb_uniqueid' with '00000000:00000000'## Booting kernel from Legacy Image at 80800000 ... Image Name: Linux-4.1.15-rialto-1.1.3 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 7170088 Bytes = 6.8 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000FDT: fixup by running configid_fixupfdt..FDT: override 'som_uniqueid' with 'ee6b78bb:1e08a9d4'FDT: override 'cb_uniqueid' with '00000000:00000000' Loading Kernel Image ... OK reserving fdt memory region: addr=83000000 size=9000 Using Device Tree in place at 83000000, end 8300bfffModify /soc/aips-bus@02000000/bee@02044000:status disabledft_system_setup for mx6 

[ 0.000000] Linux version 4.19.1511-rialtoxelk-14.10.3 0-00001-g892b58a968ea (jenkinsllandre@linuxserver2) (gcc version 56.32.0 (GCC) ) #1 3 SMP PREEMPT Thu Jul 18 Tue Aug 20 09:16:19:12 33 CEST 2019[ 0.000000] CPU: ARMv7 Processor [410fc075412fc09a] revision 5 10 (ARMv7), cr=10c53c7d

[ 0.000000] OF: fdt:Machine model: Freescale i.MX6 UltraLite CB0046 SBCSPG rev.AAxelLite Quad on XELK-L[ 0.000000] cmaOF: fdt: Reserved 64 memory: failed to reserve memory for node 'splashscreen': base 0x00000000, size 0 MiB at 0x9c000000

[ 0.000000] PERCPUpercpu: Embedded 12 14 pages/cpu @9bbb1000 s17420 e559b000 s26060 r8192 d23540 u49152d23092 u57344[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048520598[ 0.000000] Kernel command line: root=/dev/mmcblk0p4 mmcblk1p1 rootwait rw ip=192.168.0.8180:192.168.0.13:192.168.0.254:255.255.255.0:lynxxelk:eth0:off panic=1 fec_mac=7000:b350:d5c2:3e1e:a5af:72 b2 console=ttymxc0ttymxc2,115200 115200n8 vmalloc=400M mtdparts=gpmi-nand:8M(nand-uboot),1M(nand-env1),1M(nand-env2),1M(nand-dtb),1M(nand-spare),8M(nand-kernel),-(nand-ubi);spi0spi32766.0:1M(spi-uboot),256k(spi-env1),256k(spi-env2),512k(spi-dtb),8M6M(spi-kernel),4M-(spi-splashfree)maxcpus=4 video=mxcfb0:dev=lcd,LCD-(spiAM-800480STMQW-free)TA1,if=RGB666[ 0.000000] PID hash table entries: 2048 4096 (order: 12, 8192 16384 bytes)[ 0.000000] Dentry cache hash table entries: 65536 262144 (order: 68, 262144 1048576 bytes)[ 0.000000] Inode-cache hash table entries: 32768 131072 (order: 57, 131072 524288 bytes)[ 0.000000] Memory: 440268K1733632K/524288K 2097152K available (8829K 10240K kernel code, 561K 578K rwdata, 3336K 2632K rodata, 448K 1024K init, 444K 468K bss, 18484K 363520K reserved, 65536K 0K cma-reserved, 0K 90112K highmem)

[ 0.000000] vmalloc : 0xa0800000 0xe7000000 - 0xff000000 0xff800000 (1512 392 MB)[ 0.000000] lowmem : 0x80000000 - 0xa0000000 0xe6800000 ( 512 1640 MB)

[ 0.000000] .text : 0x80008000 - 0x80be9914 0x80b00000 (12167 11232 kB)[ 0.000000] .init : 0x80bea000 0x80e00000 - 0x80c5a000 0x80f00000 ( 448 1024 kB)[ 0.000000] .data : 0x80c5a000 0x80f00000 - 0x80ce6770 0x80f909a0 ( 562 579 kB)[ 0.000000] .bss : 0x80ce9000 0x80f909a0 - 0x80d583c0 0x81005ab0 ( 445 469 kB)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=14, Nodes=1

[ 0.000000] Additional perBuild-CPU info printed with stalls.[ 0.000000] RCU restricting CPUs from NR_CPUS=4 time adjustment of leaf fanout to nr_cpu_ids=1.[ 032.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1

[ 0.000000] mxc_clocksource_init 24000000L2C: DT/platform modifies aux control register: 0x32070000 -> 0x32470000[ 0.000000] Switching to timerL2C-based delay loop, resolution 41ns310 errata 752271 769419 enabled[ 0.000017000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971nsL2C-310 enabling early BRESP for Cortex-A9[ 0.000059000000] clocksource mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns[ L2C-310 full line of zeros enabled for Cortex-A9[ 0.002544000000] Console: colour dummy device 80x30L2C-310 ID prefetch enabled, offset 16 lines[ 0.002586000000] Calibrating delay loop (skipped)L2C-310 dynamic clock gating enabled, value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)standby mode enabled[ 0.002619] pid_max: default: 32768 minimum: 301[ 0.002863000000] MountL2C-310 cache hash table entries: controller enabled, 16 ways, 1024 (order: 0, 4096 bytes)kB[ 0.002896000000] MountpointL2C-cache hash table entries310: 1024 (order: 0CACHE_ID 0x410000c7, 4096 bytes)AUX_CTRL 0x76470001[ 0.004269000000] Initializing cgroup subsys net_clsSwitching to timer-based delay loop, resolution 333ns[ 0.004358000007] CPUsched_clock: Testing write buffer coherency: ok32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns[ 0.004851000023] /cpus/cpu@0 missing clock-frequency property[ 0.004893] CPU0clocksource: mxc_timer1: thread -1mask: 0xffffffff max_cycles: 0xffffffff, cpu 0, socket 0, mpidr 80000000max_idle_ns: 637086815595 ns[ 0.005007001305] Setting up static identity map for 0x80008280 - 0x800082d8Console: colour dummy device 80x30[ 0.049002001326] Brought up 1 CPUs[ 0Calibrating delay loop (skipped), value calculated using timer frequency..049046] SMP: Total of 1 processors activated (486.00 BogoMIPS(lpj=30000).[ 0.049068001340] CPUpid_max: default: 32768 minimum: All CPU(s) started in SVC mode.301[ 0.050199001461] devtmpfsMount-cache hash table entries: initialized4096 (order: 2, 16384 bytes)[ 0.072529001473] VFP support v0.3Mountpoint-cache hash table entries: 4096 (order: implementor 41 architecture 2 part 30 variant 7 rev 5, 16384 bytes)[ 0.073449002152] clocksource jiffiesCPU: maskTesting write buffer coherency: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 nsok[ 0.078835002511] pinctrl coreCPU0: initialized pinctrl subsystemthread -1, cpu 0, socket 0, mpidr 80000000[ 0.081917002573] NET: Registered protocol family 16Setting up static identity map for 0x10100000 - 0x10100058[ 0.100032149858] DMACPU1: preallocated 256 KiB pool for atomic coherent allocationsthread -1, cpu 1, socket 0, mpidr 80000001[ 0.130931219845] cpuidleCPU2: using governor ladderthread -1, cpu 2, socket 0, mpidr 80000002[ 0.161000289845] cpuidleCPU3: using governor menuthread -1, cpu 3, socket 0, mpidr 80000003[ 0.209331289938] hw-breakpointBrought up 4 CPUs[ 0.289962] SMP: found 5 Total of 4 processors activated (+1 reserved24.00 BogoMIPS) breakpoint and 4 watchpoint registers.[ 0.209366289972] hw-breakpointCPU: maximum watchpoint size is 8 bytesAll CPU(s) started in SVC mode.[ 0.213881290797] imx6ul-pinctrl 20e0000.iomuxcdevtmpfs: initialized IMX pinctrl driver[ 0.288772303116] mxs-dma 1804000VFP support v0.dma-apbh3: initializedimplementor 41 architecture 3 part 30 variant 9 rev 4[ 0.296632303415] SCSI subsystem initializedclocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns[ 0.297997303553] usbcorexor: registered new interface driver usbfsmeasuring software checksum speed[ 0.298237399574] usbcore arm4regs : registered new interface driver hub 1229.200 MB/sec[ 0.298467499575] usbcore 8regs : registered new device driver usb 948.400 MB/sec[ 0.301170599575] i2c i2c-0 32regs : IMX I2C adapter registered 1025.200 MB/sec[ 0.301217599585] i2c i2c-0xor: can't use DMAusing function: arm4regs (1229.200 MB/sec)[ 0.302989599605] i2c i2c-1pinctrl core: IMX I2C adapter registeredinitialized pinctrl subsystem[ 0.303035600546] i2c i2c-1NET: can't use DMARegistered protocol family 16[ 0.303383601598] Linux video capture interfaceDMA: v2.00preallocated 256 KiB pool for atomic coherent allocations[ 0.303599629594] pps_corecpuidle: LinuxPPS API ver. 1 registeredusing governor menu[ 0.303624629863] pps_core: Software verCPU identified as i.MX6Q, silicon rev 1. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>[ 0.303709629980] PTP clock support registeredUse WDOG2 as reset source[ 0.306533640092] MIPI CSI2 driver module loadedvddarm: bypassed regulator has no supply![ 0.307222640104] Advanced Linux Sound Architecture Driver Initialized.vddarm: failed to get the current voltage(-517)[ 0.309413640866] Bluetoothvddsoc: Core ver 2.20bypassed regulator has no supply![ 0.309546640878] NETvddsoc: Registered protocol family 31failed to get the current voltage(-517)[ 0.309572652274] Bluetoothhw-breakpoint: HCI device found 5 (+1 reserved) breakpoint and connection manager initialized1 watchpoint registers.[ 0.309615652286] Bluetoothhw-breakpoint: HCI socket layer initializedmaximum watchpoint size is 4 bytes.[ 0.309650653064] Bluetoothimx6q-pinctrl 20e0000.iomuxc: L2CAP socket layer initializedinitialized IMX pinctrl driver[ 0.309768655326] Bluetoothimx-gpc 20dc000.gpc: SCO socket layer initializedpu regulator not ready, retry[ 0.312653859845] Switched to clocksource mxc_timer1raid6: int32x1 gen() 106 MB/s[ 01.340510029627] NETraid6: Registered protocol family 2int32x1 xor() 148 MB/s[ 01.342142199808] TCP established hash table entries: 4096 raid6: int32x2 gen(order: 2, 16384 bytes) 165 MB/s[ 01.342281369715] TCP bind hash table entriesraid6: 4096 int32x2 xor(order: 3, 32768 bytes) 168 MB/s[ 01.342439539890] TCPraid6: Hash tables configured int32x4 gen(established 4096 bind 4096) 193 MB/s[ 01.342586709588] UDP hash table entriesraid6: 256 int32x4 xor(order: 1, 8192 bytes) 169 MB/s[ 01.342772879821] UDP-Lite hash table entriesraid6: 256 int32x8 gen(order: 1, 8192 bytes) 215 MB/s[ 02.343244049683] NETraid6: Registered protocol family 1int32x8 xor() 156 MB/s[ 02.343999049694] RPCraid6: Registered named UNIX socket transport module.using algorithm int32x8 gen() 215 MB/s[ 02.344036049703] RPCraid6: Registered udp transport module.... xor() 156 MB/s, rmw enabled[ 02.344059049712] RPCraid6: Registered tcp transport module.using intx1 recovery algorithm[ 02.344080063709] RPCmxs-dma 110000.dma-apbh: Registered tcp NFSv4.1 backchannel transport moduleinitialized[ 2.065778] vgaarb: loaded[ 02.347525066440] imx rpmsg driver is registered.SCSI subsystem initialized[ 02.349691066903] Bus freq usbcore: registered new interface driver module loadedusbfs[ 02.351925066972] futex hash table entriesusbcore: 256 (order: 2, 16384 bytes)registered new interface driver hub[ 02.369265067060] VFSusbcore: Disk quotas dquot_6.6.0registered new device driver usb[ 02.369761067239] VFS: Dquot2000000.aips-cache hash table entriesbus: 1024 (order 0usbphy_nop1 supply vcc not found, 4096 bytes)using dummy regulator[ 02.375630067373] NFS2000000.aips-bus: Registering the id_resolver key typeusbphy_nop2 supply vcc not found, using dummy regulator[ 02.375735068634] Key type id_resolver i2c i2c-1: IMX I2C adapter registered[ 02.375759068656] Key type id_legacy registeredi2c i2c-1: can't use DMA, using PIO instead.[ 02.375938069374] jffs2i2c i2c-2: version 2.2. (NAND) c 2001-2006 Red Hat, Inc.IMX I2C adapter registered[ 02.377869069391] fuse init (API version 7i2c i2c-2: can't use DMA, using PIO instead.23)[ 02.389293069611] io scheduler noop registeredLinux video capture interface: v2.00[ 02.389348069652] io scheduler deadline pps_core: LinuxPPS API ver. 1 registered[ 02.389863069661] io scheduler cfq registered (default)pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>[ 02.391068069684] imx-weim 21b8000.weim: Driver PTP clock support registered.[ 02.398506099650] imx-sdma 20ec000ipuv3 2400000.sdmaipu: no event needs to be remappedIPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)[ 02.398734129649] imx-sdma 20ec000ipuv3 2800000.sdmaipu: IPU DMFC NORMAL mode: loaded firmware 3.3[ 1(0.406952] imx-sdma 20ec000.sdma: initialized~1), 5B(4,5), 5F(6,7)[ 02.408779130640] pfuze100-regulator 0-0008mxc_mipi_csi2 21dc000.mipi_csi: Full layer: 1, Metal layer: 1i.MX MIPI CSI2 driver probed[ 02.409138130656] pfuze100-regulator 0-0008mxc_mipi_csi2 21dc000.mipi_csi: FAB: 0, FIN: 0i.MX MIPI CSI2 dphy version is 0x3130302a[ 2.130736] MIPI CSI2 driver module loaded[ 02.409169131075] pfuze100-regulator 0-0008: pfuze3000 foundimx rpmsg driver is registered.[ 02.424445131247] 2020000Advanced Linux Sound Architecture Driver Initialized.serial[ 2.132095] Bluetooth: ttymxc0 at MMIO 0x2020000 (irq = 20, base_baud = 5000000) is a IMXCore ver 2.22[ 12.097323132137] console [ttymxc0] enabledNET: Registered protocol family 31[ 12.103053132147] 21e8000.serialBluetooth: ttymxc1 at MMIO 0x21e8000 (irq = 227, base_baud = 5000000) is a IMXHCI device and connection manager initialized[ 12.113396132163] 21ec000.serialBluetooth: ttymxc2 at MMIO 0x21ec000 (irq = 228, base_baud = 5000000) is a IMXHCI socket layer initialized[ 12.127734132179] imx sema4 driver is registeredBluetooth: L2CAP socket layer initialized[ 2.132214] Bluetooth: SCO socket layer initialized[ 12.132143133230] clocksource: Switched to clocksource mxc_timer1[drm 2.133381] Initialized drm 1VFS: Disk quotas dquot_6.16.0 20060810[ 12.138189133447] [drm] Initialized vivante 1.0.0 20120216 on minor VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)[ 12.170899144300] brdNET: module loadedRegistered protocol family 2[ 12.188056144916] loopTCP established hash table entries: module loaded16384 (order: 4, 65536 bytes)[ 12.208198145062] nandTCP bind hash table entries: device found, Manufacturer ID16384 (order: 0xef5, Chip ID: 0xd3131072 bytes)[ 12.214658145304] nandTCP: Winbond W29N08GVHash tables configured (established 16384 bind 16384)[ 12.218103145381] nand: UDP hash table entries: 1024 MiB, SLC, erase size(order: 128 KiB3, page size: 2048, OOB size: 6432768 bytes)[ 12.226562145458] gpmiUDP-nand 1806000.gpmi-nandLite hash table entries: mode1024 (order:4 3,failed in set feature32768 bytes)[ 2.145684] NET: Registered protocol family 1[ 12.233293146130] Scanning device for bad blocksRPC: Registered named UNIX socket transport module.[ 12.611206146142] randomRPC: nonblocking pool is initializedRegistered udp transport module.[ 2.428559146149] 4 cmdlinepart partitions found on MTD device gpmi-nandRPC: Registered tcp transport module.[ 2.434834146157] Creating 4 MTD partitions on "gpmi-nand"RPC:Registered tcp NFSv4.1 backchannel transport module.[ 2.439935146903] 0x000000000000-0x000000800000 hw perfevents: "nand-uboot"enabled with armv7_cortex_a9 PMU driver, 7 counters available[ 2.448168148658] 0x000000800000-0x000000900000 : "nand-env1"Bus freq driver module loaded[ 2.456178149699] 0x000000900000-0x000000a00000 futex hash table entries: 1024 (order: "nand-env2"4, 65536 bytes)[ 2.463942150663] 0x000000a00000-0x000040000000 workingset: "nand-ubi"timestamp_bits=14 max_order=19 bucket_order=5[ 2.475077158794] gpmi-nand 1806000.gpmi-nandNFS: driver registered.Registering the id_resolver key type[ 2.484914158829] tun: Universal TUN/TAP device driver, 1.6Key type id_resolver registered[ 2.490019158838] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>Key type id_legacy registered[ 2.496882158886] CAN device ntfs: driver interface2.1.32 [ 2.503831Flags: R/W] 20b4000.ethernet supply phy not found, using dummy regulator[ 32.523866159317] pps pps0: new PPS source ptp0fuse init (API version 7.26)[ 32.529200164417] libphybounce: fec_enet_mii_buspool size: probed64 pages[ 32.537969164545] fec 20b4000.ethernet eth1: io scheduler noop registered PHC device 0[ 32.545824164558] 2188000.ethernet supply phy not found, using dummy regulatorio scheduler deadline registered[ 42.573823164853] pps pps1: new PPS source ptp1io scheduler cfq registered (default)[ 42.580612165365] fec 2188000imx-weim 21b8000.ethernet eth0weim: Driver registered PHC device 1.[ 42.588331167186] pegasusOF: PCI: v0.9.3 (2013host bridge /04soc/25), Pegasus/Pegasus II USB Ethernet driverpcie@0x01000000 ranges:[ 42.596062167201] usbcoreOF: registered new interface driver pegasus[ 4.601937] usbcorePCI: registered new interface driver rtl8150 No bus range found for /soc/pcie@0x01000000, using [bus 00-ff][ 42.607869167234] usbcoreOF: PCI: registered new interface driver r8152[ 4IO 0x01f80000..613664] usbcore: registered new interface driver asix0x01f8ffff -> 0x00000000[ 42.619266167255] usbcoreOF: PCI: registered new interface driver ax88179_178a MEM 0x01000000..0x01efffff -> 0x01000000[ 42.625610376458] usbcoreimx6q-pcie 1ffc000.pcie: registered new interface driver cdc_etherphy link never came up[ 42.631654376473] usbcoreimx6q-pcie 1ffc000.pcie: registered new interface driver dm9601Link never came up[ 42.637490379546] usbcoreimx6q-pcie 1ffc000.pcie: registered new interface driver sr9700failed to initialize host[ 42.643368379612] usbcoreimx6q-pcie: registered new interface driver CoreChipsprobe of 1ffc000.pcie failed with error -110[ 42.649451381003] usbcoreimx-sdma 20ec000.sdma: registered new interface driver smsc75xxno iram assigned, using external mem[ 42.655504381272] usbcoreimx-sdma 20ec000.sdma: registered new interface driver smsc95xx[ 4loaded firmware 3.661449] usbcore: registered new interface driver net10803[ 42.667362386090] usbcorepfuze100-regulator 1-0008: Full layer: 2, Metal layer: registered new interface driver plusb1[ 42.673120386829] usbcorepfuze100-regulator 1-0008: registered new interface driver cdc_subsetFAB: 0, FIN: 0[ 42.679235386844] usbcorepfuze100-regulator 1-0008: registered new interface driver zauruspfuze100 found.[ 42.685091390589] usbcorevddpu: registered new interface driver MOSCHIP usb-ethernet driversupplied by SW1C[ 42.692878394264] usbcoreSW4: registered new interface driver cdc_ncmBringing 2000000uV into 1800000-1800000uV[ 42.698598404619] ehci_hcdSerial: USB 8250/16550 driver, 4 ports, IRQ sharing disabled[ 2.0 'Enhanced' Host Controller 406557] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (EHCIirq = 72, base_baud = 5000000) Driveris a IMX[ 43.705271364226] ehci-mxc: Freescale On-Chip EHCI Host driverconsole [ttymxc2] enabled[ 43.711143370427] usbcore: imx sema4 driver is registered new interface driver usb-storage.[ 43.717659374693] usbcore: registered new interface driver usbserial[ 4.723739drm] usbcore: registered new interface driver usbserial_genericInitialized[ 43.730449378111] usbserial: USB Serial support registered for generic[drm] Initialized vivante 1.0.0 20120216 on minor 0[ 43.736731405835] usbcorebrd: registered new interface driver ftdi_siomodule loaded[ 43.742695415945] usbserialloop: USB Serial support registered for FTDI USB Serial Devicemodule loaded[ 43.750197425976] usbcorerandom: registered new interface driver pl2303fast init done[ 43.755981431533] usbserialnand: device found, Manufacturer ID: 0x01, Chip ID: USB Serial support registered for pl23030xdc[ 43.762105437935] usbcorenand: registered new interface driver usb_ehset_testAMD/Spansion S34ML04G1[ 43.771290441867] 2184800.usbmisc supply vbus-wakeup not foundnand: 512 MiB, using dummy regulatorSLC, erase size: 128 KiB, page size: 2048, OOB size: 64[ 43.791979449603] ci_hdrc ci_hdrcgpmi-nand 112000.1gpmi-nand: mode: EHCI Host Controller4 ,failed in set feature.[ 43.797230456179] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1Scanning device for bad blocks[ 43.822738470688] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00Bad eraseblock 107 at 0x000000d60000[ 43.830675871590] hub 17 cmdlinepart partitions found on MTD device gpmi-0:1nand[ 3.0877808] Creating 7 MTD partitions on "gpmi-nand": USB hub found[ 43.834774882873] hub 10x000000000000-00x000000800000 :1.0: 1 port detected"nand-uboot"[ 43.841227889690] mousedev0x000000800000-0x000000900000 : PS/2 mouse device common for all mice"nand-env1"[ 43.849333896183] input0x000000900000-0x000000a00000 : 20cc000"nand-env2"[ 3.snvs902640] 0x000000a00000-0x000000b00000 :snvs"nand-powerkey as /devices/platform/soc/2000000dtb"[ 3.aips909053] 0x000000b00000-bus/20cc000.snvs/20cc000.snvs0x000000c00000 :snvs"nand-powerkey/input/input0spare"[ 43.867491915610] rtc0x000000c00000-m41t80 10x000001400000 : "nand-0068: rtc core: registered m41t80 as rtc0kernel"[ 43.877073922365] snvs_rtc 20cc000.snvs0x000001400000-0x000020000000 :snvs"nand-ubi"[ 3.935431] gpmi-rtcnand 112000.gpmi-lp: rtc corenand: driver registered 20cc000.snvs:snvs-r as rtc1[ 43.886224943116] i2c /dev entries driverm25p80 spi0.0: s25fl256s1 (32768 Kbytes)[ 43.893551949486] MIPI DSI driver module loadedspi_imx 2008000.ecspi: probed[ 43.898080954834] MIPI DSI driver module loadedlibphy: Fixed MDIO Bus: probed[ 43.908354959317] IR NEC protocol handler initializedCAN device driver interface[ 43.913032963411] IR RC5(x/sz) protocol handler initialized2090000.flexcan supply xceiver not found, using dummy regulator[ 43.918133971198] IR RC6 protocol handler initialized[ 4flexcan 2090000.922818] IR JVC protocol handler initializedflexcan: device registered (reg_base=e7330000, irq=33)[ 43.927391980431] IR Sony protocol handler initialized2188000.ethernet supply phy not found, using dummy regulator[ 43.932046987667] IR SANYO protocol handler initializedpps pps0: new PPS source ptp0[ 43.937819992572] IR Sharp protocol handler initializedlibphy: fec_enet_mii_bus: probed[ 43.942578998640] IR MCE Keyboard/mouse protocol handler initialized[ 4fec 2188000.948520] IR XMP protocol handler initializedethernet eth0: registered PHC device 0[ 4.959918005528] imx2-wdt 20bc000.wdogusbcore: timeout 60 sec (nowayout=0)registered new interface driver asix[ 4.966249010995] Bluetoothusbcore: HCI UART registered new interface driver ver 2.3ax88179_178a[ 4.970736017171] Bluetoothusbcore: HCI UART protocol H4 registerednew interface driver cdc_ether[ 4.975974023055] Bluetoothusbcore: HCI UART protocol BCSP registerednew interface driver cdc_eem[ 4.981317028789] Bluetoothusbcore: HCI UART protocol LL registerednew interface driver net1080[ 4.986581034528] Bluetoothusbcore: HCI UART protocol ATH3K registerednew interface driver cdc_subset[ 4.992320040500] usbcore: registered new interface driver bcm203xzaurus[ 4.998337046185] usbcore: registered new interface driver btusbcdc_ncm[ 54.004144051898] usbcore: registered new interface driver ath3kcdc_mbim[ 54.010436057676] sdhciehci_hcd: Secure Digital USB 2.0 'Enhanced' Host Controller Interface driver(EHCI) Driver[ 54.016783064242] ci_hdrc ci_hdrc.0ehci-pci: there is a vbus glitchEHCI PCI platform driver[ 54.021954069075] sdhciusbcore: Copyright(c) Pierre Ossmanregistered new interface driver cdc_wdm[ 54.026462074853] sdhci-pltfmusbcore: SDHCI platform and OF registered new interface driver helperusb-storage[ 54.034061082060] /soc/aips2184800.usbmisc supply vbus-bus@02100000/usdhc@02190000: voltage-ranges unspecifiedwakeup not found, using dummy regulator[ 54.041294107799] sdhci-esdhc-imx 2190000ci_hdrc ci_hdrc.usdhc1: Got CD GPIOEHCI Host Controller[ 54.047125112712] sdhci-esdhc-imx 2190000ci_hdrc ci_hdrc.usdhc1: No vmmc regulator foundnew USB bus registered, assigned bus number 1[ 54.053432143266] sdhci-esdhc-imx 2190000ci_hdrc ci_hdrc.usdhc1: No vqmmc regulator foundUSB 2.0 started, EHCI 1.00[ 54.104195148907] mmc0usb usb1: SDHCI controller on 2190000.usdhc New USB device found, idVendor=1d6b, idProduct=0002[2190000 4.usdhc155739] using ADMAusb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 54.119929162970] /soc/aips-bus@02100000/usdhc@02194000usb usb1: Product: voltage-ranges unspecifiedEHCI Host Controller[ 54.135751167874] sdhciusb usb1: Manufacturer: Linux 4.9.11-esdhcxelk-imx 21940004.0.usdhc: No vqmmc regulator found0-00001-g892b58a968ea ehci_hcd[ 54.180958175991] mmc0usb usb1: SerialNumber: host does not support reading read-only switch, assuming write-enableci_hdrc.1[ 54.195277181042] mmc0hub 1-0:1.0: new high speed SDHC card at address 0007USB hub found[ 54.201798184866] mmcblk0hub 1-0: mmc01.0:0007 SD16G 14.5 GiB1 port detected[ 54.208784189960] mmcblk0mousedev: p1 p2 p3 p4PS/2 mouse device common for all mice[ 54.262803196949] mmc1input: SDHCI controller on 2194000TSC2007 Touchscreen as /devices/soc0/soc/2100000.usdhc [2194000aips-bus/21a8000.usdhc] using ADMAi2c/i2c-2/2-0048/input/input0[ 54.288395208773] ledssnvs_rtc 20cc000.snvs:snvs-pca955x 1rtc-0060lp: rtc core: leds-pca955xregistered 20cc000.snvs: Using pca9551 8snvs-bit LED driver at slave address 0x60r as rtc0[ 54.297629217621] sdhci-esdhc-imx 2194000i2c /dev entries driver[ 4.usdhc: card claims to support voltages below defined range222855] backlight supply power not found, using dummy regulator[ 54.314480232014] leds-pca955x 1-0060: gpios 51020e0000...511hdmi_video supply HDMI not found, using dummy regulator[ 54.320320239673] usbcoremxc_sdc_fb fb@0: registered new interface NO mxc display driver usbhidfound![ 54.326137245201] usbhidmxc_sdc_fb fb@1: USB HID core registered mxc display driverldb[ 54.346393255760] mmc1mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0: queuing unknown CIS tuple 0x91 (3 bytes)0xc1[ 54.352058263558] fslfbcvt: 1920x1080@60: CVT Name -asrc 20340002.asrc: driver registered073M9[ 54.364086268554] mmc1mxc_sdc_fb fb@3: new SDIO card at address 0001registered mxc display driver hdmi[ 54.376681302828] NETmxc_v4l2_output v4l2_out: Registered protocol family 26V4L2 device registered as video16[ 54.381226309660] Netfilter messages via NETLINK v0.30mxc_v4l2_output v4l2_out: V4L2 device registered as video17[ 4.316476] mxc_v4l2_output v4l2_out: V4L2 device registered as video18[ 54.387621323290] nfnl_acctmxc_v4l2_output v4l2_out: registering with nfnetlink.V4L2 device registered as video19[ 54.392569331329] nf_conntrack version 0.5.0 (7903 buckets, 31612 max)VGEN3: voltage operation not allowed[ 54.400080573594] nf_tablesov5640_read_reg:write reg error: (c) 2007-2009 Patrick McHardy <kaber@trash.net>reg=300a[ 54.407572578566] xt_time: kernel timezone camera ov5640_mipi is -0000not found[ 54.413198583464] ip_tablesusbcore: (C) 2000-2006 Netfilter Core Teamregistered new interface driver uvcvideo[ 54.418899589218] ipt_CLUSTERIP: ClusterIP Version 0USB Video Class driver (1.1.8 loaded successfully1)[ 54.425519593834] arp_tablesina2xx 2-0044: (C) 2002 David S. Millererror configuring the device: -6[ 54.430365600210] Initializing XFRM netlink socketBluetooth: HCI UART driver ver 2.3[ 54.436528604696] NETBluetooth: Registered HCI UART protocol family 10H4 registered[ 54.443966609841] sitBluetooth: IPv6 over IPv4 tunneling driverHCI UART protocol BCSP registered[ 54.450345615245] NETBluetooth: Registered HCI UART protocol family 17LL registered[ 54.455096620898] NETsdhci: Registered protocol family 15Secure Digital Host Controller Interface driver[ 54.459587627111] cansdhci: controller area network core Copyright(rev 20120528 abi 9c)Pierre Ossman[ 54.466032631474] NETsdhci-pltfm: Registered protocol family 29SDHCI platform and OF driver helper[ 54.470530703266] canmmc0: raw protocol (rev 20120528)SDHCI controller on 2190000.usdhc [ 52190000.474900usdhc] can: broadcast manager protocol (rev 20120528 t)using ADMA[ 54.480622773289] canmmc1: netlink gateway (rev 20130117) max_hops=1SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA[ 54.486871794963] Bluetoothmxc_vdoa 21e4000.vdoa: RFCOMM TTY layer initializedi.MX Video Data Order Adapter(VDOA) driver probed[ 54.491822812475] Bluetoothcaam 2100000.caam: ERA source: RFCOMM socket layer initializedCAAMVID.[ 54.497255821964] Bluetoothcaam 2100000.caam: RFCOMM ver 1AXI pipeline throttling enabled.11[ 54.501088834188] Bluetoothcaam 2100000.caam: BNEP (Ethernet Emulation) ver 1.3Entropy delay = 3200[ 54.506490899862] Bluetooth: BNEP filterscaam 2100000.caam: protocol multicastInstantiated RNG4 SH0[ 54.511768960623] Bluetoothcaam 2100000.caam: BNEP socket layer initializedInstantiated RNG4 SH1[ 54.516825965626] Bluetoothcaam 2100000.caam: HIDP device ID = 0x0a16010000000000 (Human Interface EmulationEra 4) ver 1.2[ 54.522903972075] Bluetoothcaam 2100000.caam: HIDP socket layer initializedjob rings = 2, qi = 0[ 5.528064067433] 8021q: 802.1Q VLAN Support v1.8caam algorithms registered in /proc/crypto[ 5.533635076454] rfkill_gpio bt_rfkillcaam_jr 2101000.jr0: bt_rfkill device registered.registering rng-caam[ 5.539901082395] Key type dns_resolver registeredplatform caam_sm: blkkey_ex: 4 keystore units available[ 5.569969088866] imx_thermal 2000000.aipsplatform caam_sm: 64-bus:tempmon: Industrial CPU temperature grade - max:105C critical:100C passivebit clear key:95C[ 5.584316093468] inputplatform caam_sm: gpio-push-button as /devices/platform/gpio-push-button/input/input1[0000] 00 01 02 03 04 0f 06 07[ 5.593823099138] rtcplatform caam_sm: 64-m41t80 1-0068bit black key: setting system clock to 2023-01-15 01:40:34 UTC (1673746834)[ 5.703300103778] fec 2188000.ethernet eth0platform caam_sm: Freescale FEC PHY driver [Micrel KSZ8081 or KSZ80910000] (mii_bus:phy_addr=20b4000.ethernet:03, irq=-1)da a0 6e f2 76 0e 56 22[ 5.742894109448] IPv6platform caam_sm: ADDRCONF(NETDEV_UP): eth0: link is not ready[0008] 0b ae 9a 91 c2 7a 05 0a[ 95.703705113182] fec 2188000.ethernet eth0mmc1: Link is Up host does not support reading read- 100Mbps/Full only switch, assuming write- flow control rx/txenable[ 95.723004120286] IPv6mmc1: ADDRCONF(NETDEV_CHANGE)new high speed SDHC card at address aaaa[ 5.120925] mmcblk1: eth0mmc1: link becomes readyaaaa SA08G 7.40 GiB[ 95.743630126220] IP-Config: Complete mmcblk1:p1[ 95.746981135853] device=eth0, hwaddr=70platform caam_sm:b3:d5:3e:a5128-bit clear key:72, ipaddr=192.168.0.81, mask=255.255.255.0, gw=255.255.255.255[ 95.758123140481] host=lynx, domain=, nis-domain=(none)platform caam_sm: [0000] 00 01 02 03 04 0f 06 07[ 95.764038146192] platform caam_sm: [0008] bootserver=192.168.0.13, rootserver=192.168.0.13, rootpath=08 09 0a 0b 0c 0d 0e 0f[ 95.771180151859] usb_otg1_vbusplatform caam_sm: 128-bit black key: disabling[ 95.774911156533] vref-3v3platform caam_sm: disabling[0000] b7 22 a4 2b 26 27 96 19[ 95.778410162205] ALSA device listplatform caam_sm:[0008] 0b e1 1b 90 e6 d9 d9 74[ 95.781401167893] No soundcards found.platform caam_sm: 192-bit clear key:[ 95.795772172521] EXT3-fs (mmcblk0p4)platform caam_sm: error: couldn't mount because of unsupported optional features (240)[0000] 00 01 02 03 04 0f 06 07[ 95.807057178230] EXT2-fs (mmcblk0p4)platform caam_sm: error: couldn't mount because of unsupported optional features (240)[0008] 08 09 0a 0b 0c 0d 0e 0f[ 95.858422183924] EXT4-fs (mmcblk0p4)platform caam_sm: mounted filesystem [0016] 10 11 12 13 14 15 16 17[ 5.189592] platform caam_sm: 192-bit black key:[ 5.194256] platform caam_sm: [0000] e5 e4 5f 24 ed f5 03 8c[ 5.199926] platform caam_sm: [0008] 6c af 8c 73 93 08 03 1f[ 5.205617] platform caam_sm: [0016] 6a 08 54 ea 17 4d d7 bc[ 5.211286] platform caam_sm: [0024] 11 b3 08 98 c9 00 e9 ac[ 5.216970] platform caam_sm: 256-bit clear key:[ 5.221597] platform caam_sm: [0000] 00 01 02 03 04 0f 06 07[ 5.227282] platform caam_sm: [0008] 08 09 0a 0b 0c 0d 0e 0f[ 5.232951] platform caam_sm: [0016] 10 11 12 13 14 15 16 17[ 5.238635] platform caam_sm: [0024] 18 19 1a 1b 1c 1d 1e 1f[ 5.244317] platform caam_sm: 256-bit black key:[ 5.248944] platform caam_sm: [0000] be 38 be 67 55 6b f3 f2[ 5.254628] platform caam_sm: [0008] 4b c4 2f a5 3f cb c2 b8[ 5.260296] platform caam_sm: [0016] 4f 74 cb bd b8 a8 19 86[ 5.265980] platform caam_sm: [0024] 4b 90 2f e8 fe 4d 4d 1f[ 5.271645] platform caam_sm: 64-bit unwritten blob:[ 5.276635] platform caam_sm: [0000] 00 00 00 00 00 00 00 00[ 5.282302] platform caam_sm: [0008] 00 00 00 00 00 00 00 00[ 5.287986] platform caam_sm: [0016] 00 00 00 00 00 00 00 00[ 5.293670] platform caam_sm: [0024] 00 00 00 00 00 00 00 00[ 5.299339] platform caam_sm: [0032] 00 00 00 00 00 00 00 00[ 5.305024] platform caam_sm: [0040] 00 00 00 00 00 00 00 00[ 5.310692] platform caam_sm: [0048] 00 00 00 00 00 00 00 00[ 5.316375] platform caam_sm: [0056] 00 00 00 00 00 00 00 00[ 5.322041] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 5.327725] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 5.333417] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.339085] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.344769] platform caam_sm: 128-bit unwritten blob:[ 5.349828] platform caam_sm: [0000] 00 00 00 00 00 00 00 00[ 5.355512] platform caam_sm: [0008] 00 00 00 00 00 00 00 00[ 5.361179] platform caam_sm: [0016] 00 00 00 00 00 00 00 00[ 5.366861] platform caam_sm: [0024] 00 00 00 00 00 00 00 00[ 5.372529] platform caam_sm: [0032] 00 00 00 00 00 00 00 00[ 5.378242] platform caam_sm: [0040] 00 00 00 00 00 00 00 00[ 5.383933] platform caam_sm: [0048] 00 00 00 00 00 00 00 00[ 5.389602] platform caam_sm: [0056] 00 00 00 00 00 00 00 00[ 5.395319] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 5.400987] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 5.406677] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.412345] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.418050] platform caam_sm: 196-bit unwritten blob:[ 5.423113] platform caam_sm: [0000] 00 00 00 00 00 00 00 00[ 5.428802] platform caam_sm: [0008] 00 00 00 00 00 00 00 00[ 5.434488] platform caam_sm: [0016] 00 00 00 00 00 00 00 00[ 5.440155] platform caam_sm: [0024] 00 00 00 00 00 00 00 00[ 5.445840] platform caam_sm: [0032] 00 00 00 00 00 00 00 00[ 5.451508] platform caam_sm: [0040] 00 00 00 00 00 00 00 00[ 5.457191] platform caam_sm: [0048] 00 00 00 00 00 00 00 00[ 5.462858] platform caam_sm: [0056] 00 00 00 00 00 00 00 00[ 5.468541] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 5.474225] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 5.479893] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.485578] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.491243] platform caam_sm: 256-bit unwritten blob:[ 5.496318] platform caam_sm: [0000] 00 00 00 00 00 00 00 00[ 5.501985] platform caam_sm: [0008] 00 00 00 00 00 00 00 00[ 5.507668] platform caam_sm: [0016] 00 00 00 00 00 00 00 00[ 5.513353] platform caam_sm: [0024] 00 00 00 00 00 00 00 00[ 5.519020] platform caam_sm: [0032] 00 00 00 00 00 00 00 00[ 5.524703] platform caam_sm: [0040] 00 00 00 00 00 00 00 00[ 5.530370] platform caam_sm: [0048] 00 00 00 00 00 00 00 00[ 5.536053] platform caam_sm: [0056] 00 00 00 00 00 00 00 00[ 5.541720] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 5.547404] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 5.553071] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.558754] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.564661] platform caam_sm: 64-bit black key in blob:[ 5.569901] platform caam_sm: [0000] a6 3f 14 b3 75 9d 06 66[ 5.575594] platform caam_sm: [0008] 85 d8 c8 78 b2 2e c3 22[ 5.581263] platform caam_sm: [0016] 8d 28 06 2f a1 11 42 02[ 5.586950] platform caam_sm: [0024] 26 81 66 65 61 95 61 dd[ 5.592621] platform caam_sm: [0032] 9a 00 d8 59 6d 8c a6 71[ 5.598314] platform caam_sm: [0040] cb 13 90 c5 14 60 70 6c[ 5.604001] platform caam_sm: [0048] 17 d8 2b c0 4d 0e 41 6e[ 5.609670] platform caam_sm: [0056] 00 00 00 00 00 00 00 00[ 5.615354] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 5.621022] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 5.626707] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.632374] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.638057] platform caam_sm: 128-bit black key in blob:[ 5.643398] platform caam_sm: [0000] 3d 33 3c 41 b4 ac 3a 04[ 5.649065] platform caam_sm: [0008] 49 db d7 8b 6b ba 2a a7[ 5.654752] platform caam_sm: [0016] c7 e2 19 51 cb 1a d6 ac[ 5.660419] platform caam_sm: [0024] e1 7e ec 3f e8 da 33 27[ 5.666105] platform caam_sm: [0032] 04 3d 65 42 ac c5 fe 91[ 5.671774] platform caam_sm: [0040] 23 36 2a 24 88 d9 6a 5f[ 5.677458] platform caam_sm: [0048] c2 23 6e 40 76 3b 49 1a[ 5.683126] platform caam_sm: [0056] 26 e6 77 94 63 4b 83 fd[ 5.688811] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 5.694496] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 5.700163] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.705847] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.711512] platform caam_sm: 192-bit black key in blob:[ 5.716850] platform caam_sm: [0000] c7 02 d6 c3 39 5a 61 b9[ 5.722518] platform caam_sm: [0008] 03 14 13 ea e9 1b 13 c8[ 5.728203] platform caam_sm: [0016] 03 23 31 2a 9d c3 e2 28[ 5.733889] platform caam_sm: [0024] f8 9e 8e 0a f3 69 a1 d5[ 5.739558] platform caam_sm: [0032] 7f 0a 5a 50 02 c7 6d ee[ 5.745244] platform caam_sm: [0040] ea 69 ca b2 b1 bd 2c a6[ 5.750911] platform caam_sm: [0048] 8c aa 77 30 a8 bc 2f 6e[ 5.756595] platform caam_sm: [0056] ab ef 90 00 9c 82 8e a9[ 5.762264] platform caam_sm: [0064] 08 56 4f e7 f0 83 2d 5e[ 5.767949] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 5.773633] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.779300] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.784983] platform caam_sm: 256-bit black key in blob:[ 5.790306] platform caam_sm: [0000] 1a 9b 84 d1 60 65 8f 1e[ 5.795990] platform caam_sm: [0008] e6 5e 4c e5 46 bc 9b 4d[ 5.801659] platform caam_sm: [0016] 7e 86 1b 4f 1a b7 c2 a0[ 5.807344] platform caam_sm: [0024] 48 2f 81 26 c3 21 d5 14[ 5.813014] platform caam_sm: [0032] 45 ab 75 df 39 9a b6 8d[ 5.818700] platform caam_sm: [0040] 44 f4 69 25 32 cb 7b ca[ 5.824385] platform caam_sm: [0048] 53 4f 4f a0 2c 34 7d d7[ 5.830054] platform caam_sm: [0056] 62 7b e1 51 07 e6 70 d3[ 5.835738] platform caam_sm: [0064] 0f c8 e7 fd 8d 65 48 2b[ 5.841406] platform caam_sm: [0072] 3d 3d d7 dc 20 97 32 79[ 5.847090] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 5.852758] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 5.858646] platform caam_sm: restored 64-bit black key:[ 5.863995] platform caam_sm: [0000] 04 13 ee 47 43 49 dc 56[ 5.869664] platform caam_sm: [0008] 0f 82 ce 31 bb 52 36 a3[ 5.875346] platform caam_sm: restored 128-bit black key:[ 5.880754] platform caam_sm: [0000] b7 22 a4 2b 26 27 96 19[ 5.886439] platform caam_sm: [0008] 0b e1 1b 90 e6 d9 d9 74[ 5.892104] platform caam_sm: restored 192-bit black key:[ 5.897528] platform caam_sm: [0000] e5 e4 5f 24 ed f5 03 8c[ 5.903195] platform caam_sm: [0008] 6c af 8c 73 93 08 03 1f[ 5.908880] platform caam_sm: [0016] 94 e2 d6 f2 f6 e2 d1 b4[ 5.914565] platform caam_sm: [0024] 65 c5 ce fc 5d be a3 0e[ 5.920229] platform caam_sm: restored 256-bit black key:[ 5.925654] platform caam_sm: [0000] be 38 be 67 55 6b f3 f2[ 5.931322] platform caam_sm: [0008] 4b c4 2f a5 3f cb c2 b8[ 5.937007] platform caam_sm: [0016] 4f 74 cb bd b8 a8 19 86[ 5.942675] platform caam_sm: [0024] 4b 90 2f e8 fe 4d 4d 1f[ 5.948632] snvs-secvio 20cc000.caam-snvs: can't get snvs clock[ 5.954640] snvs-secvio 20cc000.caam-snvs: violation handlers armed - non-secure state[ 5.963265] usbcore: registered new interface driver usbhid[ 5.968845] usbhid: USB HID core driver[ 5.977483] Netfilter messages via NETLINK v0.30.[ 5.982448] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)[ 5.988873] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>[ 5.995491] IPVS: Registered protocols (TCP, UDP)[ 6.000249] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)[ 6.007736] IPVS: Creating netns size=1176 id=0[ 6.012309] IPVS: ipvs loaded.[ 6.015420] IPVS: [rr] scheduler registered.[ 6.019945] ip_tables: (C) 2000-2006 Netfilter Core Team[ 6.025364] Initializing XFRM netlink socket[ 6.030189] NET: Registered protocol family 10[ 6.035824] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver[ 6.042445] NET: Registered protocol family 17[ 6.046986] Bridge firewalling registered[ 6.051005] can: controller area network core (rev 20120528 abi 9)[ 6.057413] NET: Registered protocol family 29[ 6.061882] can: raw protocol (rev 20120528)[ 6.066184] can: broadcast manager protocol (rev 20161123 t)[ 6.071859] can: netlink gateway (rev 20130117) max_hops=1[ 6.077634] Bluetooth: RFCOMM TTY layer initialized[ 6.082533] Bluetooth: RFCOMM socket layer initialized[ 6.087719] Bluetooth: RFCOMM ver 1.11[ 6.091483] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[ 6.096820] Bluetooth: BNEP filters: protocol multicast[ 6.102061] Bluetooth: BNEP socket layer initialized[ 6.107052] Bluetooth: HIDP (Human Interface Emulation) ver 1.2[ 6.112985] Bluetooth: HIDP socket layer initialized[ 6.118042] 8021q: 802.1Q VLAN Support v1.8[ 6.122643] Key type dns_resolver registered[ 6.128810] cpu cpu0: regulators not ready, retry[ 6.136274] Btrfs loaded, crc32c=crc32c-generic[ 6.154345] vddarm: supplied by SW1AB[ 6.158574] vddsoc: supplied by SW1C[ 6.162762] imx-gpc 20dc000.gpc: Registered imx-gpc[ 6.170624] mxc_vpu 2040000.vpu_fsl: VPU initialized[ 6.176392] Galcore version 6.2.2.93313[ 6.364420] cpu cpu0: Registered imx6q-cpufreq[ 6.369927] imx_thermal 2000000.aips-bus:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C[ 6.382000] input: gpio-keys as /devices/soc0/gpio-keys/input/input1[ 6.388463] random: crng init done[ 6.393214] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:02 UTC (2)[ 6.585232] Micrel KSZ9031 Gigabit PHY 2188000.ethernet:07: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet:07, irq=-1)[ 6.599581] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready[ 8.723843] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx[ 8.733481] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready[ 8.763413] IP-Config: Complete:[ 8.766675] device=eth0, hwaddr=00:50:c2:1e:af:b2, ipaddr=192.168.0.80, mask=255.255.255.0, gw=192.168.0.254[ 8.777007] host=xelk, domain=, nis-domain=(none)[ 8.782169] bootserver=192.168.0.13, rootserver=192.168.0.13, rootpath=[ 8.789994] usb_otg_vbus: disabling[ 8.793543] VGEN1: disabling[ 8.796996] VGEN6: disabling[ 8.800440] ALSA device list:[ 8.803435] No soundcards found.[ 8.815991] EXT4-fs (mmcblk1p1): couldn't mount as ext3 due to feature incompatibilities[ 8.842679] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)ordered data mode. Opts: (null)[ 8.850842] VFS: Mounted root (ext4 filesystem) on device 179:33.[ 8.865547] devtmpfs: mounted[ 8.869399] Freeing unused kernel memory: 1024K (80e00000 - 80f00000)[ 9.487639] systemd[1]: System time before build time, advancing clock.[ 9.505203] cgroup: cgroup2: unknown option "nsdelegate"[ 9.866776] VFS: Mounted root (ext4 filesystem) on device 179:4.[ 9.883176] devtmpfs: mounted[ 9.887050] Freeing unused kernel memory: 448K (80bea000 - 80c5a000)[ 10.496160531674] systemd[1]: systemd 232 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN-PCRE2 default-hierarchy=hybrid)[ 10 9.515660553715] systemd[1]: Detected architecture arm.

Welcome to Debian GNU/Linux 9 10 (stretchbuster)!

[ 10 9.554673605561] systemd[1]: Set hostname to <sbcspgsbcx>.[ 11 9.418049931065] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.[ OK ] Set up automount Arbitrary Executabcrmats File System Automount Point.[ 11.453950] /lib/systemd[1]: Created slice System Slice.[ OK ] Created slice System Slice.[ 11.473856] /system/systemd[1]: Created slice system-serial\x2dgettyjournald.slice.[ OK ] Created slice service:12 configures an IP firewall (IPAddressDeny=any), but the local system-serial\x2dgetty.slicedoes not support BPF/cgroup based firewalling.[ 11 9.504257948161] systemd[1]: Created slice User and Session Slice.[ OK ] Created slice User and Session SliceProceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)[ 1110.533748278960] systemd[1]: Listening on Journal Socket (/dev/log).

[ 1110.563897] systemd[1]: Started Forward Password Requests to Wall Directory Watch.[ OK ] Started Forward Password Requests to Wall Directory Watch.[ 11.593764313901] systemd[1]: Listening on Journal Socket.

[ 1110.631327362854] systemd[1]: Starting Restore / save the current clock... Starting Restore / save the current clock..Condition check resulted in Journal Audit Socket being skipped.[ 1110.651116373273] systemd[1]: Listening on udev Kernel SocketCreated slice User and Session Slice.[ OK ] Listening on udev Kernel SocketCreated slice User and Session Slice.[ 1110.686753415919] systemd[1]: Starting Nameserver information manager.Created slice system-serial\x2dgetty.slice. Starting Nameserver information manager.[ OK ] Created slice system-serial\x2dgetty.slice.[ 11 OK ] Reached target Remote File Systems.704613] systemd[1 OK ]: Reached target SwapListening on udev Control Socket.

[ 12 Starting Journal Service..043481] systemd[1]: Listening on fsck to fsckd communication Socket.

[ 12.146983] systemd[1]: Starting Journal Service... Starting Journal Service...[ 12.175481] systemd[1]: Starting Remount Root and Kernel Mounting POSIX Message Queue File SystemsSystem... Starting Remount Root and Kernel File SystemsRestore / save the current clock...[ 12.233748 OK ] systemd[1]: Listening on udev Control SocketStarted Dispatch Password cts to Console Directory Watch.[ OK ] Listening on udev Control Socket.[ 12.255885] systemd[1]: Starting Set the console keyboard layout.Created slice system-getty.slice.

[ 12 OK ] Listening on udev Kernel Socket.300492] systemd Starting udev Coldplug all Devices... Mounting Kernel Debug File System...[1 OK ]: Reached target Encrypted VolumesSet up automount Arbitrarycs File System Automount Point.[ OK ] Reached target Encrypted VolumesSystem Time Synchronized.[ 12 Starting Nameserver information manager..343277] systemd[1]: Reached target Slices.

[ 12 OK ] Listening on initctl Compatibility Named Pipe.[ OK ] Started Forward Password Rcuests to Wall Directory Watch.376923[ OK ] systemdReached target Paths.[1 OK ]: Mounted Debug Reached target Local Encrypted Volumes. Starting Remount Root and Kernel File SystemSystems...[ OK ] Started Journal Service.[ OK ] Mounted Debug File SystemStarted Load Kernel Modules.[ 11.393648] blk_update_request: I/O error, dev mtdblock0, sector 0[ 11.400689] blk_update_request: I/O error, dev mtdblock0, sector 0[ 11.406878] Buffer I/O error on dev mtdblock0, logical block 0, async page read[ 11.432685] blk_update_request: I/O error, dev mtdblock2, sector 8[ 11.439722] blk_update_request: I/O error, dev mtdblock2, sector 8[ 11.445912] Buffer I/O error on dev mtdblock2, logical block 1, async page read[ 11.471166] blk_update_request: I/O error, dev mtdblock4, sector 8[ 1211.401970478236] systemdblk_update_request: I/O error, dev mtdblock4, sector 8[ 11.484425] Buffer I/O error on dev mtdblock4, logical block 1, async page read[ 11.533245] blk_update_request: I/O error, dev mtdblock6, sector 0[ 11.540322]blk_update_request: Started Restore I/O error, dev mtdblock6, sector 0[ 11.546518] Buffer I/ save the current clockO error on dev mtdblock6, logical block 0, async page read[ OK ] Mounted POSIX Message Queue File System.

[ 12.502408] systemd[1322015]blk_update_request: Started Create Static Device Nodes in /dev.[ OK ] Started Create Static Device Nodes in I/O error, dev.mtdblock0, sector 0[ 12.585921] systemd[1329270]blk_update_request: Started Load Kernel Modules.[ OK ] Started Load Kernel Modules.I/O error, dev mtdblock0, sector 0[ 12.646288335461] systemd[1]: Started Nameserver information manager.[ OK ] Started Nameserver information manager.Buffer I/O error on dev mtdblock0, logical block 0, async page read[ 12.799581361578] systemd[Buffer I/O error on dev mtdblock2, logical block 1]: Mounting FUSE Control File System... Mounting FUSE Control File System..., async page read[ 12.865084387440] systemd[Buffer I/O error on dev mtdblock4, logical block 1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables..., async page read[ 12.954008441026] systemd[1]: Starting udev Kernel Device Manager... Starting udev Kernel Device Manager...[ 13.017200] systemd[1]: Mounted FUSE Control File System.[ OK ] Mounted FUSE Control File System.[ OK ] Started Apply Kernel Variables.[ OK ] Started Journal Service.[ OK ] Started udev Kernel Device Manager.Buffer I/O error on dev mtdblock6, logical block 0, async page read

Starting Load/Save Random Seed... Starting udev Coldplug all DevicesKernel Device Manager...

Starting Set console font and keymap... Starting Raise network interfaces...[ OK ] Started Flush Journal to Persistent Storageudev Kernel Device Manager.

[ OK ] Reached target System Time SynchronizedStarted Entropy daemon using the HAVEGE algorithm.

[ OK ] Started Entropy daemon using the HAVEGE algorithmRaise network interfaces.[ OK ] Started Armbian ZRAM config.

[ OK ] Started Armbian ZRAM configFound device /dev/ttymxc2.[ OK ] Listening on Load/Save RF citch Status /dev/rfkill Watch.[ OK ] Created slice system-systemd\x2dbacklight.slice. Starting Load/Save Screen cness of backlight:backlight...

[ OK ] Started Raise network interfaces.[ OK ] Started udev Coldplug all Devices.[ OK ] Found device /dev/ttymxc0.[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting Load/Save RF Kill Switch Status...[ OK ] Started Load/Save RF Kill Switch StatusScreen Bchtness of backlight:backlight.

[ OK ] Started Daily apt download activitiesListening on D-Bus System Message Bus Socket.[ OK ] Reached target Sockets.

[ OK ] Started Armbian first run tasks Starting Login Service.[ OK ] Created slice system-getty.slice.

Starting Network ManagerWPA supplicant... Starting Login ServiceDispatcher daemon for systemd-networkd...

Starting LSB: Start/stop sysstat's sadcResets System Activity Data Collector... Starting rng-tools.service...

Starting LSB: Load kernel modules needed cd to enable cpufreq scaling... Starting Network Manager...[ OK ] Started Resets System Activity Data Collector.

[ OK ] Started LSB: Start/stop sysstat's sadcrng-tools.service.

[ OK ] Started WPA supplicant.[ OK ] Started LSB: Load kernel modules needed mcded to enable cpufreq scaling.

[ OK ] Started Unattended Upgrades Shutdown. Starting Permit User Sessions... Starting Network Manager Wait Onlinechrony, an NTP client/server...

Starting LSB: Set sysfs variables from [ OK ] Started chrony, an NTP client/etc/sysfs.conf..server.

Starting Hostname Service...[FAILED] Failed to start Hostname ServiceAuthorization Manager.See 'systemctl status systemd-hostnamed.service' for details.[ OK ] Started OpenBSD Secure Shell server.[FAILED] Failed to start Network Manager Wait Online.See 'systemctl status NetworkManager-wait-online.service' for details.

Starting LSB: Start NTP Advanced IEEE 802.11 management daemon...

[ OK ] Started Serial Getty on ttymxc0ttymxc2.[ OK ] Reached target Login PromptsCreated slice User Slice of UID 0. Starting User Runtime Directory /run/user/0...[ OK ] Started LSB: Start NTP daemonUser Runtime Directory /run/user/0. Starting User Manager for UID 0... Starting Daily man-db regeneration... Starting Rotate log files... Starting Daily apt download activities...[ OK ] Reached target Multi-Started User SystemManager for UID 0.[ OK ] Reached target Graphical InterfaceStarted Session c1 of user root.[ OK ] Started Daily apt download activities. Starting Update UTMP about System Runlevel ChangesDaily apt upgrade and clean activities...[ OK ] Started Update UTMP about System Runlevel ChangesDaily man-db regeneration.[ OK ] Started Daily apt upgrade and clean activities.

Debian Stretch Buster with Armbian Linux ttymxc0ttymxc2

sbcspg sbcx login: root

You are required to change your password immediately (root enforced)Changing password for root.(current) UNIX passwordLast login:Enter new UNIX passwordMon Oct 21 09:Retype new UNIX password45:21 CEST 2019 on ttymxc2

___| |__ ___ ___ _ __ _____ __ _/ __| '_ \ / __\ \/ __| '_ \ / _` |\__ \ |_) | (__\__ \ |_) | (_| |> <|___/_.__/ \___|___/ .___/ \__, | |_| |___/\Welcome to Debian Stretch Buster with Armbian Linux 4.19.1511-rialtoxelk-14.10.30-00001-g892b58a968eaSystem load: 01.08 048 1.07 064 1.12 92 Up time: 14 50 min Local users: 2Memory usage: 5 17 % of 494MB 1694MB IP: 192.168.0.8180CPU temp: 43‹C67‹CUsage of /: 1529% of 57.5G3G

New to Armbian? Check the documentation firstroot@sbcx: https://docs.armbian.com~# exitlogout

Thank you for choosing Armbian! Supportsbcx login: www.armbian.comPassword:Creating a new user accountLast login: Mon Oct 21 08:55:54 CEST 2019 from 192. Press <Ctrl-C> to abort168.0.145 on pts/1 _Please provide a username (eg. your forename): armbian ___| |__ _____ __Trying to add user armbianAdding user `armbian/ __| ' ..._ \ / __\ \/ /Adding new group `armbian' \__ \ |_) | (1000) ..__ > <|___/_.__/ \___/_/\_\Adding new user `armbian' (1000) Welcome to Debian Buster with group `armbian' Armbian Linux 4.9.11-xelk-4.Creating home directory `/home/armbian' ..0.0-00001-g892b58a968eaCopying files from `/etc/skel' System load: 1.44 1.61 1.Enter new UNIX password90 Up time:Retype new UNIX password 51 min Local users: 2passwdMemory usage: password updated successfullyChanging the user information for armbianEnter the new value, or press ENTER for the default Full Name [] 19 % of 1694MB IP: 192.168.0.80 Room Number []CPU temp: 66‹C Work Phone []Usage of /: Home Phone []: Other []:Is the information correct? [Y/n] 29% of 7.3G

rootarmbian@sbcspgsbcx:~#$</pre>