Integration guide (Naon)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Contents
IntroductionEdit
This page provides useful information and resources to system designers in order to integrate Naon module in his/her application very quickly.
Several topics are covered, ranging from hardware issues to manufacturing aspects.
HardwareEdit
Several schematics are available in order to accelerate the design of carrier board hosting Naon SOM. Please note that, even if these schematics are derived from tested real-world applications, they are provided "as is" and they might be modified in order to adapt to your specific application.
Naon connectors pinoutEdit
The following links provide a portion of schematic where Naon mating connectors are instatiated:
Compatible part numbers are FX8C-140P-SVx by Hirose. x depends on selected stacking height. For more details please see Hirose FX8C Series.
Boot sequenceEdit
Naon default boot sequence can be changed by optional external circuitry. The following links provide a portion of schematic showing an example circuit that allows to change BTMODE bootstrap pins:
SoftwareEdit
Software section of the integration guide is about software device support for Naon hardware peripherals on different OSes.
For additional information regarding lowlevel support and configuration take a look at PSP Porting guide on TI wiki