Difference between revisions of "FAQs (Naon)"
DevWikiAdmin (talk | contribs) m (→I've received the NELK package. How am I supposed to start working with it?) |
DevWikiAdmin (talk | contribs) m (→I've received the NELK package. How am I supposed to start working with it?) |
||
| Line 31: | Line 31: | ||
== I've received the NELK package. How am I supposed to start working with it? == | == I've received the NELK package. How am I supposed to start working with it? == | ||
| − | You can follow the steps listed below: | + | '''A''':You can follow the '''steps listed below''': |
* Check che kit contents | * Check che kit contents | ||
Revision as of 10:37, 24 May 2013
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Introduction[edit | edit source]
This page collects all the Frequently Asked Question regarding Naon
General[edit | edit source]
Q: Where can I found Naon SOM hardware information?[edit | edit source]
A: please refer to the following pages:
Q: Do you provide an evaluation kit?[edit | edit source]
A: yes, we provide the Naon Embedded Linux Kit. Please refer to Naon_Embedded_Linux_Kit_(NELK)
Carrier board design[edit | edit source]
Q: Can you suggest some guidelines for the carrier board design?[edit | edit source]
A: As a starting point, you can refer to the Carrier_board_design_guidelines_(SOM) page, that will highlight some best practices.
Using NELK[edit | edit source]
I've received the NELK package. How am I supposed to start working with it?[edit | edit source]
A:You can follow the steps listed below:
- Check che kit contents
- If you have the bootable SD card:
- insert the SD into the card reader on the carrier board
- connect the power supply adapter to the main power supply and to the carrier board
- connect the serial cable from your pc to the carrier board
- start your terminal emulator program
- switch on the power supply
- monitor the boot process on the serial console
- Install the DVDK virtual machine image
- Check the virtual machine components
- Read the NELK HowTos
- Build the software components for the Naon platform
- Boot the system from network to test the development platform
