Enabling I2C2 on Linux (Diva)
Revision as of 07:56, 21 June 2013 by DevWikiAdmin (talk | contribs)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Introduction[edit | edit source]
This article shows how to enable the I2C2 interface which can be used in a standard Linux application.
Pin Mux Option[edit | edit source]
I2C2 data/clock signals are available at different Diva pins. We chose the following configuration:
| Signal | Diva Connector Phisical Pin | CPU Ball |
|---|---|---|
| I2C2_SCL | J1.37 | D17 |
| I2C2_SDA | J1.39 | D18 |
