ETRA SOM/ETRA Hardware/Peripherals/USB Host
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 0.9.0 | Dec 2020 | First Draft | |
| [TBD_link X.Y.Z] | Month Year | TBD | |
| ... | ... | ... | |
Peripheral USB Host[edit | edit source]
USB host controller supporting the standard registers used for full-speed (OHCI controller) and high-speed (EHCI controller).
Description[edit | edit source]
The USB Host interface available on ETRA SoM is based on STM32MP1 SoC.
The USB Host port supports the following standards and features:
- Two physical ports supported using an on-chip 2-port high-speed PHY
- the second port is shared with USB OTG peripheral
- Supports OHCI model for full- and low-speed operation
- Supports EHCI model for high-speed operation
- LPM (link power management) support
- DMA engine with local 512 Byte packet buffer
Pin mapping[edit | edit source]
The Pin mapping is described in the Pinout table section
