Difference between revisions of "ETRA SOM/ETRA Hardware/Peripherals/DCMI"
< ETRA SOM | ETRA Hardware
(Tag: Visual edit) |
(→Description) |
||
| Line 36: | Line 36: | ||
* 8-, 10-, 12- or 14-bit parallel interface | * 8-, 10-, 12- or 14-bit parallel interface | ||
| − | * embedded/external line and frame synchronization | + | * embedded/external line and frame synchronization |
| + | ** note that the VSYNC external signal is not available if the NAND flash is populated on board of the SoM | ||
* continuous or snapshot mode | * continuous or snapshot mode | ||
* crop feature | * crop feature | ||
Revision as of 10:39, 30 December 2020
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 0.9.0 | Dec 2020 | First Draft | |
| [TBD_link X.Y.Z] | Month Year | TBD | |
| ... | ... | ... | |
Peripheral DCMI[edit | edit source]
The Digita CaMera Interface (DCMI) is a synchronous parallel interface able to receive a high-speed data flow from an external CMOS camera module.
Description[edit | edit source]
The DCMI interface available on ETRA SoM is based on STM32MP1 SoC.
The DCMI port supports the following standards and features:
- 8-, 10-, 12- or 14-bit parallel interface
- embedded/external line and frame synchronization
- note that the VSYNC external signal is not available if the NAND flash is populated on board of the SoM
- continuous or snapshot mode
- crop feature
- supports the following data formats:
- 8/10/12/14-bit progressive video: either monochrome or raw bayer
- YCbCr 4:2:2 progressive video
- RGB 565 progressive video
- compressed data: JPEG
Pin mapping[edit | edit source]
The Pin mapping is described in the Pinout table section
