| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2020/12/31 | First Release | ||
Contents
Peripheral CANEdit
The Controller Area Network (CAN) is a robust standard BUS used in automotive applications. It allows multiple devices to transmit at the same time, the highest priority device continues the transmission while the others wait for the next available slot.
An external CAN tranciever is needed to operate.
DescriptionEdit
The CAN interface available on ETRA SOM is based on STM32MP1 SoC.
The CAN port supports the following standards and features:
- two Flexible Data CAN (FDCAN) modules with shared message RAM and a clock calibration unit
- compliant with ISO 11898-1: 2015 (CAN protocol specification version 2.0 part A, B) and CAN FD protocol specification version 1.0
- the first CAN module supports time triggered CAN (TTCAN), specified in ISO 11898-4
- 10 Kbyte message RAM implements filters, receive FIFOs, receive buffers, transmit event FIFOs, transmit buffers (and triggers for TTCAN)
Pin mappingEdit
The Pin mapping is described in the Pinout table section