Difference between revisions of "ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/Power Supply"
| Line 20: | Line 20: | ||
The power supply for this EVB can be provided through J1 connector or from USB OTG connector. | The power supply for this EVB can be provided through J1 connector or from USB OTG connector. | ||
| − | === | + | === Description === |
| − | |||
| − | |||
| − | |||
| − | |||
Power can be provided through the J1 connector. Power voltage range is +[12-24 V]. | Power can be provided through the J1 connector. Power voltage range is +[12-24 V]. | ||
| Line 32: | Line 28: | ||
[[File:{{{nome-som}}-EVB-Power Supply-connector.png|thumb|center|500px|Power Supply connector]] | [[File:{{{nome-som}}-EVB-Power Supply-connector.png|thumb|center|500px|Power Supply connector]] | ||
| − | === | + | === Signals === |
The following table describes the interface signals: | The following table describes the interface signals: | ||
| Line 51: | Line 47: | ||
=== Power LED === | === Power LED === | ||
| − | DL1 is a green LED (placed near the | + | DL1 is a green LED (placed near the SOM) it shows the status of the power input. This LED is ON when a valid power supply is present either from J1 or USB OTG port. |
---- | ---- | ||
[[Category:ETRA]] | [[Category:ETRA]] | ||
Revision as of 11:28, 7 January 2021
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Dec 2020 | First Release | |
Power Supply[edit | edit source]
The power supply for this EVB can be provided through J1 connector or from USB OTG connector.
Description[edit | edit source]
Power can be provided through the J1 connector. Power voltage range is +[12-24 V].
J1 is a two pins MSTBA 2.5/2-G-5.08 Phoenix connector.
[[File:{Template:Nome-som-EVB-Power Supply-connector.png|thumb|center|500px|Power Supply connector]]
Signals[edit | edit source]
The following table describes the interface signals:
| Pin# | Pin function | Pin Notes |
|---|---|---|
| 1 | VIN | +[12-24 V] |
| 2 | GND | Ground |
Power LED[edit | edit source]
DL1 is a green LED (placed near the SOM) it shows the status of the power input. This LED is ON when a valid power supply is present either from J1 or USB OTG port.
