ETRA SOM/ETRA Evaluation Kit/Getting started/Boot Configurations
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| ID# | Issue Date | Notes | |
| xx/08/2023 | DESK-MP1-L-1.0.0 release | ||
TBD: sostituire le opzioni di boot con quelle disponibili nel SOC e nella Carrier
Boot Configurations[edit | edit source]
ETRA Evaluation Board is built upon STM32MP1 processor.
The following sections detail boot configuration options, which differ depending on the SoM.
Available options[edit | edit source]
Boot modes can be selected by S1 DIP-switch which act directly on BOOT_MODE[0..2] configuration pins.
S1 switches are mapped to BOOT_MODE[0:2] pins allowing different boot modes.
The different boot modes can be found in the following table:
DA RIVEDERE
DIP settings[edit | edit source]
| BOOT_MODE[0:2] | Boot sequence | Notes |
|---|---|---|
| 0111 | MMC0/SPI0/UART0 | Default boot from NOR SPI |
| 0011 | NAND/NANDI2C/MMC0 | boot from NAND |
| 1001 | SPI0/MMC0/EMAC1 | boot from EMAC if DIVA has no NOR and no NAND on board |
