ETRA SBC/Interfaces and Connectors/JTAG
< ETRA SBCRevision as of 15:17, 5 January 2021 by U0009 (talk | contribs) (Created page with "{{:ETRA SOM/ETRA Evaluation Kit/Interfaces and Connectors/JTAG}} Category:ETRA SBC")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2021/01/11 | First Release | ||
JTAG interfaceEdit
DescriptionEdit
The JTAG interface is available on the Evaluation Kit at the connector J11.
J11 is a 30 pin (2x15x2.54mm) header connector and is also used for expansion signlas.
SignalsEdit
The following table describes the interface signals on J11 connector:
| Pin# | SOM Pin# | Pin name | Pin function | Pin Notes |
|---|---|---|---|---|
| 17 | J18.62 | VDD | VDD | reference voltage |
| 19 | J18.90 | JTMS-SWDIO | JTMS-SWDIO | |
| 21 | J18.98 | JTCK-SWCLK | JTCK-SWCLK | |
| 23 | J18.92 | JTDI | JTDI | |
| 25 | J18.96 | JTDO-TRACESWOO | JTDO-TRACESWOO | |
| 27 | J18.94 | NJTRST | NJTRST |