| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2021/01/14 | First Release | ||
Contents
GPIOs interfaceEdit
DescriptionEdit
STM32MP1 can handle external pins in many different ways and most of them can be configured as GPIOs. When a pin is set as a GPIO, it is possible to read its value, change its direction or change output value directly from the shell.
SignalsEdit
The following table describes some GPIOs signals available on J12 (2x15x2.54mm) connector:
| Pin# | SOM Pin# | Pin name | Pin function | Pin Notes |
|---|---|---|---|---|
| 3 | J18.97 | PD13 | ||
| 5 | J18.99 | PD12 | ||
| 6 | J18.34 | PB13 | ||
| 7 | J18.101 | PD11 | ||
| 8 | J18.68 | PB5 | ||
| 9 | J18.105 | PG9 | ||
| 12 | J18.48 | PA12 | ||
| 14 | J18.38 | PA11 | ||
| 18 | J18.80 | PF6 | ||
| 20 | J18.76 | PF9 | ||
| 22 | J18.74 | PF7 | ||
| 24 | J18.78 | PF8 | ||
| 26 | J18.181 | PD6 | ||
| 28 | J18.28 | PA9 |
Device mappingEdit
GPIOs can be used directly on Linux kernel device driver or can be configured on the device tree.
Device usageEdit
See the GPIOs page on the DESK-MP1-L Software Manual.