| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2021/01/14 | First Release | ||
Contents
Ethernet interfaceEdit
DescriptionEdit
The Ethernet interface is available on the Evaluation Kit at the connector J5.
J5 is a standard RJ45 connector connected to the SOM integrated ethernet controller and PHY.
J6 and J7 connectors are pin-to-pin compatible mounting options for the same interface.
SignalsEdit
The following table describes the interface signals on J18 SOM connector:
| Pin# | SOM Pin# | Pin name | Pin function | Pin Notes |
|---|---|---|---|---|
| 3 | J18.19 | ETH_TX_P | Transmit data + | |
| 5 | J18.21 | ETH_TX_M | Transmit data - | |
| 6 | J18.23 | ETH_RX_P | Receive data + | |
| 8 | J18.25 | ETH_RX_M | Receive data - | |
| 2,11 | J18.13 | ETH1_LED | Eth link or activity led |
Device mappingEdit
This network interface is mapped at eth0 device in Linux.
Device usageEdit
The peripheral is used the standard kernel interface and network protocol stack.