DWS ADD-ON/DWS Hardware/Integration guide
< DWS ADD-ON | DWS HardwareRevision as of 13:33, 18 January 2022 by U0007 (talk | contribs) (Created page with "<section begin="History" /> {| style="border-collapse:collapse; " ! colspan="4" style="width:100%; text-align:left" ; border-bottom:solid 2px #ededed" |History |- ! style="bo...")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Jan 2022 | First version | |
Contents
Integration guideEdit
This section provides useful information and resources that let the system designer integrate the DWS module in the application very quickly.
Typical scenarioEdit
The following picture shows the conceptual block diagram of the application where the host is an Embedded PC.
Electrical guidelinesEdit
- xxxxxxxxxx Keep SDIO lines as short as possible.
- xxxxxxxxxx 5V and 3.3V rails can power up in any order
- xxxxxxxxxx Keep WIFI_EN asserted during power-up sequence
Calibration processEdit
The radio interface of the DWS module is configured by several parameters. These parameters are set through a calibration process, that is described in detail xxxxxxxxxxxxxxx
MAC addressEdit
The MAC address is set at calibration time for WLAN. xxxxxxxxxx
Tested AntennasEdit
Following a list of tested and approved antennas:
- Laird technology 001-0001 with UFL to SMA adapter
 |
