<section begin="History" />

!colspan="4" style="width:100%; text-align:left"; border-bottom:solid 2px #ededed"|History

!style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#73B2C7; padding:5px; color:white"|Issue Date!style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#73B2C7; padding:5px; color:white"|Notes

|style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#edf8fb; padding:5px; color:#000000"|2024/01/30|style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#edf8fb; padding:5px; color:#000000"|DESK-XZ7-L-1.0.1 release

<section end="History" />

<section begin="Body" />

[[DESK-XZ7-L]] contains all the required software and documentation to start developing with Vivado, Vitis and Petalinux application on the Bora, BoraXpress and BoraLite platforms. In particular, [[DESK-XZ7-L]] provides a virtual machine, called DVDK, with the following features: * VirtualBox virtual machine (.OVA archive)* based on Lubuntu 20.04 LTS (64-bit version)* pre-installed VirtualBox Guest Additions* LXDE desktop environment* boot disk with the distro and pre-configured basic Linux services:** TFTP: with base directory <code>/tftpboot/</code>** NFS: configured through the <code>/etc/exports</code> file* pre-installed Vivado, Vitis and Petalinux requirements, as described [https://docs.xilinx.com/r/2021.2-English/ug1144-petalinux-tools-reference-guide/Installation-Requirements here]** MVM has: 2 CPUs, 8192MB of RAM and 300 GB of HDD* administrator account (dvdk) with autologin. Please note that the user account credentials are provided with the development kit (you can find them in the README file contained in the sw/dvdk folder of the kit distribution)** user: '''dvdk'''** password: '''dvdk''' ===Host setup===As stated previously, host tools are based on a [[Managed_Virtual_Machine_(MVM)|Managed Virtual Machine]]. MVM OVA files can be downloaded [https://cloud.dave.eu/ws-RA-DESK-MX/ '''here''']. For accessing <b><i>DESK Reserved area</i></b> please contact our [mailto:helpdesk@dave.eu helpdesk support channel] To install it, please refer to [[VirtualBox_Starting_DVDK_Virtual_Machine#Using_a_.ova_file|this page]]. It is worth remembering that access to git repositories is required to download target source code. To enable it, please refer to [[Accessing_DAVE_Embedded_Systems_restricted_git_repositories|this page]]. === Virtual Machine updates === The Ubuntu distribution may ask for an update, if available, due to the Update Notifier.  [[File:Update_Ubuntu_Notifier.png]] The updates are not required for the proper DESK Virtual Machine functionality. {{ImportantMessage|text=Even if the update can be transparent to the VM normal operations, it is suggested to '''not''' install the updates. They may change (or in a worst-case corrupt) what has been tested and documented in our wiki pages}} If this is annoying for you, it is possible to [https://askubuntu.com/questions/1364529/remove-updated-software-notification-on-20-04-2-lts disable it]. === Install Vivado and Vitis === {{ImportantMessage|text=Even if you can build Vivado and Vitis in MVM, this required large amount of resources, so we not suggest you to use a MVM but a build server}} For install Vivado and Vitis, please follow the steps here below * Download <code>Xilinx_Unified_2021.2_1021_0703_Lin64.bin</code> from [https://www.xilinx.com/support/download.html official Xilinx download page] and move it in MVM. In this case we create <code>Xilinx-2021.2</code> directory and inside we put installation file. Version used in <code>DESK-XZ7-L-1.0.1</code> is <code>Vivado ML 2021.2</code> * Change permission of file, in order to be perform by user <pre class="workstation-terminal">dvdk@vagrant:~$ cd Xilinx-2021.2dvdk@vagrant:~/Xilinx-2021.2$ chmod u+x Xilinx_Unified_2021.2_1021_0703_Lin64.bin</pre> * Perform <code>Xilinx_Unified_2021.2_1021_0703_Lin64.bin</code> file <pre class="workstation-terminal">dvdk@vagrant:~/Xilinx-2021.2$ ./Xilinx_Unified_2021.2_1021_0703_Lin64.bin Verifying archive integrity... All good.Uncompressing Xilinx Installer..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................</pre> * Step for install Vivado and Vitis {| class="wikitable" style="text-align: center"| [[File:Unified xilinx installer-0.png|thumb]]| [[File:Unified-xilinx-installer-1.png|thumb]]| [[File:Unified-xilinx-installer-2.png|thumb]]| [[File:Unified-xilinx-installer-3.png|thumb]]|}{| class="wikitable" style="text-align: center"| [[File:Unified-xilinx-installer-vitis-1.png|thumb]]| [[File:Unified-xilinx-installer-vitis-2.png|thumb]]| [[File:Unified-xilinx-installer-4.png|thumb]]| [[File:Unified-xilinx-installer-vitis-3.png|thumb]]|}{| class="wikitable" style="text-align: center"| [[File:Unified-xilinx-installer-vitis-4.png|thumb]]| [[File:Unified-xilinx-installer-5.png|thumb]]|} * Open Vivado from terminal <pre class="workstation-terminal">dvdk@vagrant:~$ source Vivado/2021.2/settings64.sh dvdk@vagrant:~$ vivado ****** Vivado v2021.2 (64-bit) **** SW Build 3367213 on Tue Oct 19 02:47:39 MDT 2021 **** IP Build 3369179 on Thu Oct 21 08:25:16 MDT 2021 ** Copyright 1986-2021 Xilinx, Inc. All Rights Reserved. start_gui</pre>[[File:Vivado-desktop.png|center|thumb]] * Open Vitis from terminal <pre class="workstation-terminal">dvdk@vagrant:~$ source Vitis/2021.2/settings64.sh dvdk@vagrant:~$ vitis ****** Xilinx Vitis Development Environment****** Vitis v2021.2 (64-bit) **** SW Build 3363750 on 2021-10-16-13:10:08 ** Copyright 1986-2021 Xilinx, Inc. All Rights Reserved. Launching Vitis with command /home/dvdk/vitis/Vitis/2021.2/eclipse/lnx64.o/eclipse -vmargs -Xms64m -Xmx1024m -Dorg.eclipse.swt.internal.gtk.cairoGraphics=false -Dosgi.configuration.area=@user.home/.Xilinx/Vitis/2021.2 --add-modules=ALL-SYSTEM --add-opens=java.base/java.nio=ALL-UNNAMED --add-opens=java.desktop/sun.swing=ALL-UNNAMED --add-opens=java.desktop/javax.swing=ALL-UNNAMED --add-opens=java.desktop/javax.swing.tree=ALL-UNNAMED --add-opens=java.desktop/javax.swing.plaf.basic=ALL-UNNAMED --add-opens=java.desktop/javax.swing.plaf.synth=ALL-UNNAMED --add-opens=java.desktop/com.sun.awt=ALL-UNNAMED --add-opens=java.desktop/sun.awt.X11=ALL-UNNAMED &dvdk@vagrant:~$ </pre>[[File:Vitis-desktop-1.png|center|thumb]] ==== Example of build <code>bora.xsa</code> with Vivado ==== Here below there is an example of build <code>bora.xsa</code> using Vivado <pre class="mw-collapsible mw-collapsed workstation-terminal">dvdk@vagrant:~$ git clone --recursive git@gitlab.com:DAVEEmbeddedSystems/desk/desk-xz7-l/petalinux.git -b desk-xz7-l-1.0.1Cloning into 'petalinux'...remote: Enumerating objects: 992, done.remote: Counting objects: 100% (992/992), done.remote: Compressing objects: 100% (550/550), done.remote: Total 992 (delta 546), reused 697 (delta 378), pack-reused 0Receiving objects: 100% (992/992), 2.71 MiB | 4.76 MiB/s, done.Resolving deltas: 100% (546/546), done.Note: switching to '829c44d28c8c46b51744c14a92107ec3c5790934'. You are in 'detached HEAD' state. You can look around, make experimentalchanges and commit them, and you can discard any commits you make in thisstate without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you maydo so (now or later) by using -c with the switch command. Example:  git switch -c <new-branch-name> Or undo this operation with:  git switch - Turn off this advice by setting config variable advice.detachedHead to false Submodule 'project-spec/meta-dave' (git@gitlab.com:DAVEEmbeddedSystems/desk/desk-xz7-l/meta-dave.git) registered for path 'project-spec/meta-dave'Submodule 'vivado' (git@gitlab.com:DAVEEmbeddedSystems/desk/desk-xz7-l/vivado.git) registered for path 'vivado'Cloning into '/home/dvdk/petalinux/project-spec/meta-dave'...remote: Enumerating objects: 569, done.remote: Counting objects: 100% (569/569), done.remote: Compressing objects: 100% (240/240), done.remote: Total 569 (delta 252), reused 528 (delta 233), pack-reused 0Receiving objects: 100% (569/569), 28.83 MiB | 10.49 MiB/s, done.Resolving deltas: 100% (252/252), done.Cloning into '/home/dvdk/petalinux/vivado'...remote: Enumerating objects: 733, done.remote: Counting objects: 100% (39/39), done.remote: Compressing objects: 100% (36/36), done.remote: Total 733 (delta 18), reused 0 (delta 0), pack-reused 694Receiving objects: 100% (733/733), 191.37 KiB | 1010.00 KiB/s, done.Resolving deltas: 100% (330/330), done.Submodule path 'project-spec/meta-dave': checked out 'e944801f104f86191cd086d0cea8f3df88dda061'Submodule path 'vivado': checked out 'adc46265b1271040f5b69177e69bb1a304407924'dvdk@vagrant:~$ cd petalinux/vivado/dvdk@vagrant:~/petalinux/vivado$ source ~/Vivado/2021.2/settings64.shdvdk@vagrant:~/petalinux/vivado$ cp -r boards/ ~/Vivado/2021.2/data/.dvdk@vagrant:~/petalinux/vivado$ vivado -mode tcl -source scripts/recreate_prj_bora_BASE.tcl -notrace -tclargs "gen_bitstream" ****** Vivado v2021.2 (64-bit) **** SW Build 3367213 on Tue Oct 19 02:47:39 MDT 2021 **** IP Build 3369179 on Thu Oct 21 08:25:16 MDT 2021 ** Copyright 1986-2021 Xilinx, Inc. All Rights Reserved. source scripts/recreate_prj_bora_BASE.tcl -notracecreate_project: Time (s): cpu = 00:00:15 ; elapsed = 00:00:14 . Memory (MB): peak = 2586.273 ; gain = 8.930 ; free physical = 4428 ; free virtual = 8877WARNING: [BD 41-2576] File '/home/dvdk/petalinux/vivado/bd/bora/ip/bora_processing_system7_0_0/bora_processing_system7_0_0.xci' referenced by design 'bora' could not be found.INFO: [BD 41-434] Could not find an IP with XCI file by name: bora_processing_system7_0_0INFO: [BD 41-433]Design successfully migrated to use XCI files...WARNING: [BD 41-2670] Found an incomplete address path from address space '/processing_system7_0/Data' to master interface '/processing_system7_0/M_AXI_GP0'. Please either complete or remove this path to resolve.WARNING: [BD 5-699] No address segments matched 'get_bd_addr_segs -of_objects /processing_system7_0/Data'Wrote : </home/dvdk/petalinux/vivado/bd/bora/bora.bd>VHDL Output written to : /home/dvdk/petalinux/vivado/bd/bora/synth/bora.vVHDL Output written to : /home/dvdk/petalinux/vivado/bd/bora/sim/bora.vVHDL Output written to : /home/dvdk/petalinux/vivado/bd/bora/hdl/bora_wrapper.vmake_wrapper: Time (s): cpu = 00:00:15 ; elapsed = 00:00:17 . Memory (MB): peak = 2655.059 ; gain = 68.785 ; free physical = 4143 ; free virtual = 8635INFO: Project created:boraGenerating BITSTREAMINFO: [BD 41-1662] The design 'bora.bd' is already validated. Therefore parameter propagation will not be re-run.VHDL Output written to : /home/dvdk/petalinux/vivado/bd/bora/synth/bora.vVHDL Output written to : /home/dvdk/petalinux/vivado/bd/bora/sim/bora.vVHDL Output written to : /home/dvdk/petalinux/vivado/bd/bora/hdl/bora_wrapper.vINFO: [IP_Flow 19-5611] Unable to find an associated reset port for the interface 'M_AXI_GP0'. A default connection has been created.INFO: [BD 41-1029] Generation completed for the IP Integrator block processing_system7_0 .Exporting to file /home/dvdk/petalinux/vivado/bd/bora/hw_handoff/bora.hwhGenerated Hardware Definition File /home/dvdk/petalinux/vivado/bd/bora/synth/bora.hwdefgenerate_target: Time (s): cpu = 00:00:57 ; elapsed = 00:01:00 . Memory (MB): peak = 2655.059 ; gain = 0.000 ; free physical = 4089 ; free virtual = 8598[Fri Jan 26 14:41:02 2024] Launched bora_processing_system7_0_0_synth_1, synth_1...Run output will be captured here:bora_processing_system7_0_0_synth_1: /home/dvdk/petalinux/vivado/vivado/bora.runs/bora_processing_system7_0_0_synth_1/runme.logsynth_1: /home/dvdk/petalinux/vivado/vivado/bora.runs/synth_1/runme.log[Fri Jan 26 14:41:03 2024] Launched impl_1...Run output will be captured here: /home/dvdk/petalinux/vivado/vivado/bora.runs/impl_1/runme.loglaunch_runs: Time (s): cpu = 00:00:08 ; elapsed = 00:00:08 . Memory (MB): peak = 2655.133 ; gain = 0.074 ; free physical = 4074 ; free virtual = 8593[Fri Jan 26 14:41:03 2024] Waiting for impl_1 to finish... *** Running vivado with args -log bora_wrapper.vdi -applog -m64 -product Vivado -messageDb vivado.pb -mode batch -source bora_wrapper.tcl -notrace  ****** Vivado v2021.2 (64-bit) **** SW Build 3367213 on Tue Oct 19 02:47:39 MDT 2021 **** IP Build 3369179 on Thu Oct 21 08:25:16 MDT 2021 ** Copyright 1986-2021 Xilinx, Inc. All Rights Reserved. source bora_wrapper.tcl -notracecreate_project: Time (s): cpu = 00:00:14 ; elapsed = 00:00:13 . Memory (MB): peak = 2586.273 ; gain = 8.930 ; free physical = 3752 ; free virtual = 8339INFO: [IP_Flow 19-234] Refreshing IP repositoriesINFO: [IP_Flow 19-1704] No user IP repositories specifiedINFO: [IP_Flow 19-2313] Loaded Vivado IP repository '/home/dvdk/vivado/Vivado/2021.2/data/ip'.Command: link_design -top bora_wrapper -part xc7z020clg400-1Design is defaulting to srcset: sources_1Design is defaulting to constrset: constrs_1INFO: [Device 21-403] Loading part xc7z020clg400-1INFO: [Project 1-454] Reading design checkpoint '/home/dvdk/petalinux/vivado/bd/bora/ip/bora_processing_system7_0_0/bora_processing_system7_0_0.dcp' for cell 'bora_i/processing_system7_0'Netlist sorting complete. Time (s): cpu = 00:00:00.03 ; elapsed = 00:00:00.03 . Memory (MB): peak = 2586.348 ; gain = 0.000 ; free physical = 3423 ; free virtual = 8010INFO: [Project 1-479] Netlist was created with Vivado 2021.2INFO: [Project 1-570] Preparing netlist for logic optimizationParsing XDC File [/home/dvdk/petalinux/vivado/bd/bora/ip/bora_processing_system7_0_0/bora_processing_system7_0_0.xdc] for cell 'bora_i/processing_system7_0/inst'Finished Parsing XDC File [/home/dvdk/petalinux/vivado/bd/bora/ip/bora_processing_system7_0_0/bora_processing_system7_0_0.xdc] for cell 'bora_i/processing_system7_0/inst'Parsing XDC File [/home/dvdk/petalinux/vivado/constr/bora_pinout.xdc]WARNING: [Vivado 12-4702] SLEW is not a supported property on input port(s). Setting is ignored. [/home/dvdk/petalinux/vivado/constr/bora_pinout.xdc:7]WARNING: [Vivado 12-4702] DRIVE is not a supported property on input port(s). Setting is ignored. [/home/dvdk/petalinux/vivado/constr/bora_pinout.xdc:8]WARNING: [Vivado 12-4702] SLEW is not a supported property on input port(s). Setting is ignored. [/home/dvdk/petalinux/vivado/constr/bora_pinout.xdc:18]WARNING: [Vivado 12-4702] DRIVE is not a supported property on input port(s). Setting is ignored. [/home/dvdk/petalinux/vivado/constr/bora_pinout.xdc:19]Finished Parsing XDC File [/home/dvdk/petalinux/vivado/constr/bora_pinout.xdc]Parsing XDC File [/home/dvdk/petalinux/vivado/constr/bora_timing.xdc]Finished Parsing XDC File [/home/dvdk/petalinux/vivado/constr/bora_timing.xdc]INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s).Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2586.348 ; gain = 0.000 ; free physical = 3317 ; free virtual = 7904INFO: [Project 1-111] Unisim Transformation Summary:No Unisim elements were transformed. 9 Infos, 4 Warnings, 0 Critical Warnings and 0 Errors encountered.link_design completed successfullylink_design: Time (s): cpu = 00:00:18 ; elapsed = 00:00:19 . Memory (MB): peak = 2586.348 ; gain = 0.074 ; free physical = 3317 ; free virtual = 7904Command: opt_designAttempting to get a license for feature 'Implementation' and/or device 'xc7z020'INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7z020'Running DRC as a precondition to command opt_design Starting DRC TaskINFO: [DRC 23-27] Running DRC with 2 threadsINFO: [Project 1-461] DRC finished with 0 ErrorsINFO: [Project 1-462] Please refer to the DRC report (report_drc) for more information. Time (s): cpu = 00:00:03 ; elapsed = 00:00:02 . Memory (MB): peak = 2602.281 ; gain = 15.934 ; free physical = 3308 ; free virtual = 7896 Starting Cache Timing Information TaskINFO: [Timing 38-35] Done setting XDC timing constraints.Ending Cache Timing Information Task | Checksum: 1bdab601e Time (s): cpu = 00:00:18 ; elapsed = 00:00:19 . Memory (MB): peak = 2602.281 ; gain = 0.000 ; free physical = 2919 ; free virtual = 7520 Starting Logic Optimization Task Phase 1 RetargetINFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s).INFO: [Opt 31-49] Retargeted 0 cell(s).Phase 1 Retarget | Checksum: 197a7418e Time (s): cpu = 00:00:00.07 ; elapsed = 00:00:00.16 . Memory (MB): peak = 2833.391 ; gain = 0.000 ; free physical = 2679 ; free virtual = 7282INFO: [Opt 31-389] Phase Retarget created 0 cells and removed 24 cellsINFO: [Opt 31-1021] In phase Retarget, 1 netlist objects are constrained preventing optimization. Please run opt_design with -debug_log to get more detail. Phase 2 Constant propagationINFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s).Phase 2 Constant propagation | Checksum: 197a7418e Time (s): cpu = 00:00:00.08 ; elapsed = 00:00:00.16 . Memory (MB): peak = 2833.391 ; gain = 0.000 ; free physical = 2679 ; free virtual = 7282INFO: [Opt 31-389] Phase Constant propagation created 0 cells and removed 0 cells Phase 3 SweepPhase 3 Sweep | Checksum: 20041086d Time (s): cpu = 00:00:00.33 ; elapsed = 00:00:00.42 . Memory (MB): peak = 2833.391 ; gain = 0.000 ; free physical = 2679 ; free virtual = 7282INFO: [Opt 31-389] Phase Sweep created 0 cells and removed 3 cells Phase 4 BUFG optimizationPhase 4 BUFG optimization | Checksum: 20041086d Time (s): cpu = 00:00:00.34 ; elapsed = 00:00:00.44 . Memory (MB): peak = 2833.391 ; gain = 0.000 ; free physical = 2679 ; free virtual = 7282INFO: [Opt 31-662] Phase BUFG optimization created 0 cells of which 0 are BUFGs and removed 0 cells. Phase 5 Shift Register OptimizationINFO: [Opt 31-1064] SRL Remap converted 0 SRLs to 0 registers and converted 0 registers of register chains to 0 SRLsPhase 5 Shift Register Optimization | Checksum: 20041086d Time (s): cpu = 00:00:00.35 ; elapsed = 00:00:00.44 . Memory (MB): peak = 2833.391 ; gain = 0.000 ; free physical = 2679 ; free virtual = 7282INFO: [Opt 31-389] Phase Shift Register Optimization created 0 cells and removed 0 cells Phase 6 Post Processing NetlistPhase 6 Post Processing Netlist | Checksum: 20041086d Time (s): cpu = 00:00:00.36 ; elapsed = 00:00:00.45 . Memory (MB): peak = 2833.391 ; gain = 0.000 ; free physical = 2679 ; free virtual = 7282INFO: [Opt 31-389] Phase Post Processing Netlist created 0 cells and removed 0 cellsOpt_design Change Summary=========================  -------------------------------------------------------------------------------------------------------------------------| Phase | #Cells created | #Cells Removed | #Constrained objects preventing optimizations |-------------------------------------------------------------------------------------------------------------------------| Retarget | 0 | 24 | 1 || Constant propagation | 0 | 0 | 0 || Sweep | 0 | 3 | 0 || BUFG optimization | 0 | 0 | 0 || Shift Register Optimization | 0 | 0 | 0 || Post Processing Netlist | 0 | 0 | 0 |-------------------------------------------------------------------------------------------------------------------------   Starting Connectivity Check Task Time (s): cpu = 00:00:00.01 ; elapsed = 00:00:00 . Memory (MB): peak = 2833.391 ; gain = 0.000 ; free physical = 2679 ; free virtual = 7281Ending Logic Optimization Task | Checksum: 1d38c9117 Time (s): cpu = 00:00:00.43 ; elapsed = 00:00:00.52 . Memory (MB): peak = 2833.391 ; gain = 0.000 ; free physical = 2679 ; free virtual = 7281 Starting Power Optimization TaskINFO: [Pwropt 34-132] Skipping clock gating for clocks with a period < 2.00 ns.Ending Power Optimization Task | Checksum: 1d38c9117 Time (s): cpu = 00:00:00.01 ; elapsed = 00:00:00.02 . Memory (MB): peak = 2837.359 ; gain = 3.969 ; free physical = 2678 ; free virtual = 7281 Starting Final Cleanup TaskEnding Final Cleanup Task | Checksum: 1d38c9117 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2837.359 ; gain = 0.000 ; free physical = 2678 ; free virtual = 7281 Starting Netlist Obfuscation TaskNetlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2837.359 ; gain = 0.000 ; free physical = 2678 ; free virtual = 7281Ending Netlist Obfuscation Task | Checksum: 1d38c9117 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2837.359 ; gain = 0.000 ; free physical = 2678 ; free virtual = 7281INFO: [Common 17-83] Releasing license: Implementation27 Infos, 4 Warnings, 0 Critical Warnings and 0 Errors encountered.opt_design completed successfullyopt_design: Time (s): cpu = 00:00:27 ; elapsed = 00:00:26 . Memory (MB): peak = 2837.359 ; gain = 251.012 ; free physical = 2678 ; free virtual = 7281INFO: [Timing 38-480] Writing timing data to binary archive.Writing placer database...Writing XDEF routing.Writing XDEF routing logical nets.Writing XDEF routing special nets.Write XDEF Complete: Time (s): cpu = 00:00:00.26 ; elapsed = 00:00:00.14 . Memory (MB): peak = 2877.379 ; gain = 0.000 ; free physical = 2672 ; free virtual = 7277INFO: [Common 17-1381] The checkpoint '/home/dvdk/petalinux/vivado/vivado/bora.runs/impl_1/bora_wrapper_opt.dcp' has been generated.INFO: [runtcl-4] Executing : report_drc -file bora_wrapper_drc_opted.rpt -pb bora_wrapper_drc_opted.pb -rpx bora_wrapper_drc_opted.rpxCommand: report_drc -file bora_wrapper_drc_opted.rpt -pb bora_wrapper_drc_opted.pb -rpx bora_wrapper_drc_opted.rpxINFO: [IP_Flow 19-1839] IP Catalog is up to date.INFO: [Timing 38-35] Done setting XDC timing constraints.INFO: [DRC 23-27] Running DRC with 2 threadsINFO: [Vivado_Tcl 2-168] The results of DRC are in file /home/dvdk/petalinux/vivado/vivado/bora.runs/impl_1/bora_wrapper_drc_opted.rpt.report_drc completed successfullyCommand: place_designAttempting to get a license for feature 'Implementation' and/or device 'xc7z020'INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7z020'INFO: [DRC 23-27] Running DRC with 2 threadsINFO: [Vivado_Tcl 4-198] DRC finished with 0 ErrorsINFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information.Running DRC as a precondition to command place_designINFO: [DRC 23-27] Running DRC with 2 threadsINFO: [Vivado_Tcl 4-198] DRC finished with 0 ErrorsINFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information. Starting Placer TaskINFO: [Place 30-611] Multithreading enabled for place_design using a maximum of 2 CPUs Phase 1 Placer Initialization Phase 1.1 Placer Initialization Netlist SortingNetlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2942.152 ; gain = 0.000 ; free physical = 2650 ; free virtual = 7255Phase 1.1 Placer Initialization Netlist Sorting | Checksum: 12aa8e666 Time (s): cpu = 00:00:00.01 ; elapsed = 00:00:00.02 . Memory (MB): peak = 2942.152 ; gain = 0.000 ; free physical = 2650 ; free virtual = 7255Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2942.152 ; gain = 0.000 ; free physical = 2650 ; free virtual = 7255 Phase 1.2 IO Placement/ Clock Placement/ Build Placer DevicePhase 1.2 IO Placement/ Clock Placement/ Build Placer Device | Checksum: 18e88cbf6 Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 2942.152 ; gain = 0.000 ; free physical = 2650 ; free virtual = 7259 Phase 1.3 Build Placer Netlist ModelPhase 1.3 Build Placer Netlist Model | Checksum: 1c987dde7 Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 2942.152 ; gain = 0.000 ; free physical = 2652 ; free virtual = 7261 Phase 1.4 Constrain Clocks/MacrosPhase 1.4 Constrain Clocks/Macros | Checksum: 1c987dde7 Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 2942.152 ; gain = 0.000 ; free physical = 2651 ; free virtual = 7262Phase 1 Placer Initialization | Checksum: 1c987dde7 Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 2942.152 ; gain = 0.000 ; free physical = 2651 ; free virtual = 7262 Phase 2 Final Placement CleanupNetlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2942.152 ; gain = 0.000 ; free physical = 2651 ; free virtual = 7262 Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 2942.152 ; gain = 0.000 ; free physical = 2651 ; free virtual = 7262INFO: [Place 30-281] No place-able instance is found; design doesn't contain any instance or all instances are placedEnding Placer Task | Checksum: 18e88cbf6 Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 2942.152 ; gain = 0.000 ; free physical = 2651 ; free virtual = 7262INFO: [Common 17-83] Releasing license: Implementation44 Infos, 4 Warnings, 0 Critical Warnings and 0 Errors encountered.place_design completed successfullyINFO: [Timing 38-480] Writing timing data to binary archive.Writing placer database...Writing XDEF routing.Writing XDEF routing logical nets.Writing XDEF routing special nets.Write XDEF Complete: Time (s): cpu = 00:00:00.30 ; elapsed = 00:00:00.15 . Memory (MB): peak = 2942.152 ; gain = 0.000 ; free physical = 2647 ; free virtual = 7261INFO: [Common 17-1381] The checkpoint '/home/dvdk/petalinux/vivado/vivado/bora.runs/impl_1/bora_wrapper_placed.dcp' has been generated.INFO: [runtcl-4] Executing : report_io -file bora_wrapper_io_placed.rptreport_io: Time (s): cpu = 00:00:00.37 ; elapsed = 00:00:00.42 . Memory (MB): peak = 2942.152 ; gain = 0.000 ; free physical = 2638 ; free virtual = 7250INFO: [runtcl-4] Executing : report_utilization -file bora_wrapper_utilization_placed.rpt -pb bora_wrapper_utilization_placed.pbINFO: [runtcl-4] Executing : report_control_sets -verbose -file bora_wrapper_control_sets_placed.rptreport_control_sets: Time (s): cpu = 00:00:00.08 ; elapsed = 00:00:00.11 . Memory (MB): peak = 2942.152 ; gain = 0.000 ; free physical = 2649 ; free virtual = 7260Command: route_designAttempting to get a license for feature 'Implementation' and/or device 'xc7z020'INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7z020'Running DRC as a precondition to command route_designINFO: [Timing 38-35] Done setting XDC timing constraints.INFO: [DRC 23-27] Running DRC with 2 threadsINFO: [Vivado_Tcl 4-198] DRC finished with 0 ErrorsINFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information.  Starting Routing TaskINFO: [Route 35-254] Multithreading enabled for route_design using a maximum of 2 CPUs Phase 1 Build RT DesignChecksum: PlaceDB: b1aff12d ConstDB: 0 ShapeSum: dcd8dac9 RouteDB: 0Post Restoration Checksum: NetGraph: 6a47235c NumContArr: 913b0353 Constraints: 0 Timing: 0Phase 1 Build RT Design | Checksum: fb8226af Time (s): cpu = 00:01:01 ; elapsed = 00:00:58 . Memory (MB): peak = 3011.688 ; gain = 69.535 ; free physical = 2507 ; free virtual = 7120 Phase 2 Router Initialization Phase 2.1 Create TimerPhase 2.1 Create Timer | Checksum: fb8226af Time (s): cpu = 00:01:01 ; elapsed = 00:00:58 . Memory (MB): peak = 3011.688 ; gain = 69.535 ; free physical = 2508 ; free virtual = 7121 Phase 2.2 Fix Topology ConstraintsPhase 2.2 Fix Topology Constraints | Checksum: fb8226af Time (s): cpu = 00:01:01 ; elapsed = 00:00:59 . Memory (MB): peak = 3011.688 ; gain = 69.535 ; free physical = 2499 ; free virtual = 7112 Phase 2.3 Pre Route CleanupPhase 2.3 Pre Route Cleanup | Checksum: fb8226af Time (s): cpu = 00:01:01 ; elapsed = 00:00:59 . Memory (MB): peak = 3011.688 ; gain = 69.535 ; free physical = 2499 ; free virtual = 7112 Number of Nodes with overlaps = 0 Phase 2.4 Update TimingPhase 2.4 Update Timing | Checksum: 159c58580 Time (s): cpu = 00:01:01 ; elapsed = 00:00:59 . Memory (MB): peak = 3024.566 ; gain = 82.414 ; free physical = 2489 ; free virtual = 7103 Router Utilization Summary Global Vertical Routing Utilization = 0 % Global Horizontal Routing Utilization = 0 % Routable Net Status* *Does not include unroutable nets such as driverless and loadless. Run report_route_status for detailed report. Number of Failed Nets = 134 (Failed Nets is the sum of unrouted and partially routed nets) Number of Unrouted Nets = 134 Number of Partially Routed Nets = 0 Number of Node Overlaps = 0 Phase 2 Router Initialization | Checksum: 159c58580 Time (s): cpu = 00:01:02 ; elapsed = 00:00:59 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2487 ; free virtual = 7101 Phase 3 Initial Routing Phase 3.1 Global RoutingPhase 3.1 Global Routing | Checksum: 159c58580 Time (s): cpu = 00:01:02 ; elapsed = 00:00:59 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2487 ; free virtual = 7101 Number of Nodes with overlaps = 0Phase 3 Initial Routing | Checksum: 11e2de977 Time (s): cpu = 00:01:02 ; elapsed = 00:00:59 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2489 ; free virtual = 7103 Phase 4 Rip-up And Reroute Phase 4.1 Global Iteration 0Phase 4.1 Global Iteration 0 | Checksum: 11e2de977 Time (s): cpu = 00:01:02 ; elapsed = 00:00:59 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2489 ; free virtual = 7103Phase 4 Rip-up And Reroute | Checksum: 11e2de977 Time (s): cpu = 00:01:02 ; elapsed = 00:00:59 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2489 ; free virtual = 7103 Phase 5 Delay and Skew Optimization Phase 5.1 Delay CleanUpPhase 5.1 Delay CleanUp | Checksum: 11e2de977 Time (s): cpu = 00:01:02 ; elapsed = 00:00:59 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2489 ; free virtual = 7103 Phase 5.2 Clock Skew OptimizationPhase 5.2 Clock Skew Optimization | Checksum: 11e2de977 Time (s): cpu = 00:01:02 ; elapsed = 00:00:59 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2489 ; free virtual = 7103Phase 5 Delay and Skew Optimization | Checksum: 11e2de977 Time (s): cpu = 00:01:02 ; elapsed = 00:00:59 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2489 ; free virtual = 7103 Phase 6 Post Hold Fix Phase 6.1 Hold Fix Iter Phase 6.1.1 Update TimingPhase 6.1.1 Update Timing | Checksum: 11e2de977 Time (s): cpu = 00:01:02 ; elapsed = 00:00:59 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2489 ; free virtual = 7103Phase 6.1 Hold Fix Iter | Checksum: 11e2de977 Time (s): cpu = 00:01:02 ; elapsed = 00:00:59 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2489 ; free virtual = 7103Phase 6 Post Hold Fix | Checksum: 11e2de977 Time (s): cpu = 00:01:02 ; elapsed = 00:01:00 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2489 ; free virtual = 7103 Phase 7 Route finalize Router Utilization Summary Global Vertical Routing Utilization = 0.0156881 % Global Horizontal Routing Utilization = 0.0187627 % Routable Net Status* *Does not include unroutable nets such as driverless and loadless. Run report_route_status for detailed report. Number of Failed Nets = 0 (Failed Nets is the sum of unrouted and partially routed nets) Number of Unrouted Nets = 0 Number of Partially Routed Nets = 0 Number of Node Overlaps = 0 Phase 7 Route finalize | Checksum: 11e2de977 Time (s): cpu = 00:01:02 ; elapsed = 00:01:00 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2489 ; free virtual = 7103 Phase 8 Verifying routed nets  Verification completed successfullyPhase 8 Verifying routed nets | Checksum: 11e2de977 Time (s): cpu = 00:01:02 ; elapsed = 00:01:00 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2487 ; free virtual = 7101 Phase 9 Depositing RoutesPhase 9 Depositing Routes | Checksum: 11e2de977 Time (s): cpu = 00:01:02 ; elapsed = 00:01:00 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2487 ; free virtual = 7101 Phase 10 Post Router TimingPhase 10 Post Router Timing | Checksum: 11e2de977 Time (s): cpu = 00:01:02 ; elapsed = 00:01:00 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2487 ; free virtual = 7101INFO: [Route 35-16] Router Completed Successfully Time (s): cpu = 00:01:02 ; elapsed = 00:01:00 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2500 ; free virtual = 7114 Routing Is Done.INFO: [Common 17-83] Releasing license: Implementation57 Infos, 4 Warnings, 0 Critical Warnings and 0 Errors encountered.route_design completed successfullyroute_design: Time (s): cpu = 00:01:06 ; elapsed = 00:01:02 . Memory (MB): peak = 3032.449 ; gain = 90.297 ; free physical = 2500 ; free virtual = 7114INFO: [Common 17-600] The following parameters have non-default value.general.maxThreadsINFO: [Timing 38-480] Writing timing data to binary archive.Writing placer database...Writing XDEF routing.Writing XDEF routing logical nets.Writing XDEF routing special nets.Write XDEF Complete: Time (s): cpu = 00:00:00.26 ; elapsed = 00:00:00.15 . Memory (MB): peak = 3046.391 ; gain = 0.000 ; free physical = 2496 ; free virtual = 7113INFO: [Common 17-1381] The checkpoint '/home/dvdk/petalinux/vivado/vivado/bora.runs/impl_1/bora_wrapper_routed.dcp' has been generated.INFO: [runtcl-4] Executing : report_drc -file bora_wrapper_drc_routed.rpt -pb bora_wrapper_drc_routed.pb -rpx bora_wrapper_drc_routed.rpxCommand: report_drc -file bora_wrapper_drc_routed.rpt -pb bora_wrapper_drc_routed.pb -rpx bora_wrapper_drc_routed.rpxINFO: [IP_Flow 19-1839] IP Catalog is up to date.INFO: [DRC 23-27] Running DRC with 2 threadsINFO: [Vivado_Tcl 2-168] The results of DRC are in file /home/dvdk/petalinux/vivado/vivado/bora.runs/impl_1/bora_wrapper_drc_routed.rpt.report_drc completed successfullyINFO: [runtcl-4] Executing : report_methodology -file bora_wrapper_methodology_drc_routed.rpt -pb bora_wrapper_methodology_drc_routed.pb -rpx bora_wrapper_methodology_drc_routed.rpxCommand: report_methodology -file bora_wrapper_methodology_drc_routed.rpt -pb bora_wrapper_methodology_drc_routed.pb -rpx bora_wrapper_methodology_drc_routed.rpxINFO: [Timing 38-35] Done setting XDC timing constraints.INFO: [DRC 23-133] Running Methodology with 2 threadsINFO: [Vivado_Tcl 2-1520] The results of Report Methodology are in file /home/dvdk/petalinux/vivado/vivado/bora.runs/impl_1/bora_wrapper_methodology_drc_routed.rpt.report_methodology completed successfullyINFO: [runtcl-4] Executing : report_power -file bora_wrapper_power_routed.rpt -pb bora_wrapper_power_summary_routed.pb -rpx bora_wrapper_power_routed.rpxCommand: report_power -file bora_wrapper_power_routed.rpt -pb bora_wrapper_power_summary_routed.pb -rpx bora_wrapper_power_routed.rpxINFO: [Timing 38-35] Done setting XDC timing constraints.Running Vector-less Activity Propagation... Finished Running Vector-less Activity Propagation70 Infos, 4 Warnings, 0 Critical Warnings and 0 Errors encountered.report_power completed successfullyINFO: [runtcl-4] Executing : report_route_status -file bora_wrapper_route_status.rpt -pb bora_wrapper_route_status.pbINFO: [runtcl-4] Executing : report_timing_summary -max_paths 10 -file bora_wrapper_timing_summary_routed.rpt -pb bora_wrapper_timing_summary_routed.pb -rpx bora_wrapper_timing_summary_routed.rpx -warn_on_violationINFO: [Timing 38-91] UpdateTimingParams: Speed grade: -1, Delay Type: min_max.INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 2 CPUsINFO: [runtcl-4] Executing : report_incremental_reuse -file bora_wrapper_incremental_reuse_routed.rptINFO: [Vivado_Tcl 4-1062] Incremental flow is disabled. No incremental reuse Info to report.INFO: [runtcl-4] Executing : report_clock_utilization -file bora_wrapper_clock_utilization_routed.rptINFO: [runtcl-4] Executing : report_bus_skew -warn_on_violation -file bora_wrapper_bus_skew_routed.rpt -pb bora_wrapper_bus_skew_routed.pb -rpx bora_wrapper_bus_skew_routed.rpxINFO: [Timing 38-91] UpdateTimingParams: Speed grade: -1, Delay Type: min_max.INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 2 CPUsCommand: write_bitstream -force bora_wrapper.bitAttempting to get a license for feature 'Implementation' and/or device 'xc7z020'INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7z020'Running DRC as a precondition to command write_bitstreamINFO: [IP_Flow 19-1839] IP Catalog is up to date.INFO: [DRC 23-27] Running DRC with 2 threadsINFO: [Vivado 12-3199] DRC finished with 0 ErrorsINFO: [Vivado 12-3200] Please refer to the DRC report (report_drc) for more information.INFO: [Designutils 20-2272] Running write_bitstream with 2 threads.Loading data files...Loading site data...Loading route data...Processing options...Creating bitmap...Creating bitstream...Writing bitstream ./bora_wrapper.bit...INFO: [Vivado 12-1842] Bitgen Completed Successfully.INFO: [Project 1-1876] WebTalk data collection is mandatory when using a ULT device. To see the specific WebTalk data collected for your design, open the usage_statistics_webtalk.html or usage_statistics_webtalk.xml file in the implementation directory.INFO: [Common 17-83] Releasing license: Implementation12 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered.write_bitstream completed successfullywrite_bitstream: Time (s): cpu = 00:00:25 ; elapsed = 00:00:21 . Memory (MB): peak = 3404.168 ; gain = 352.906 ; free physical = 2464 ; free virtual = 7089INFO: [Common 17-206] Exiting Vivado at Fri Jan 26 14:47:18 2024...[Fri Jan 26 14:47:19 2024] impl_1 finishedwait_on_runs: Time (s): cpu = 00:06:42 ; elapsed = 00:06:16 . Memory (MB): peak = 2655.133 ; gain = 0.000 ; free physical = 3984 ; free virtual = 8608Command: write_cfgmem -format BIN -size 16 -interface SMAPx32 -disablebitswap -loadbit {up 0x0 /home/dvdk/petalinux/vivado/vivado/bora.runs/impl_1/bora_wrapper.bit} /home/dvdk/petalinux/vivado/vivado/bora.runs/impl_1/bora_wrapper.binCreating config memory files...INFO: [Writecfgmem 68-23] Start address provided has been multiplied by a factor of 4 due to the use of interface SMAPX32.Creating bitstream load up from address 0x00000000Loading bitfile /home/dvdk/petalinux/vivado/vivado/bora.runs/impl_1/bora_wrapper.bitWriting file /home/dvdk/petalinux/vivado/vivado/bora.runs/impl_1/bora_wrapper.binWriting log file /home/dvdk/petalinux/vivado/vivado/bora.runs/impl_1/bora_wrapper.prm===================================Configuration Memory information===================================File Format BINInterface SMAPX32Size 16MStart Address 0x00000000End Address 0x00FFFFFF Addr1 Addr2 Date File(s)0x00000000 0x003DBAFB Jan 26 14:47:18 2024 /home/dvdk/petalinux/vivado/vivado/bora.runs/impl_1/bora_wrapper.bit6 Infos, 3 Warnings, 0 Critical Warnings and 0 Errors encountered.write_cfgmem completed successfullyWrite BITSTREAM Done!!!!INFO: [Vivado 12-4895] Creating Hardware Platform: /home/dvdk/petalinux/vivado/vivado/bora.xsa ...WARNING: [Project 1-645] Board images not set in Hardware Platform.INFO: [Vivado 12-12464] The Hardware Platform can be used for HardwareINFO: [Vivado 12-4896] Successfully created Hardware Platform: /home/dvdk/petalinux/vivado/vivado/bora.xsawrite_hw_platform: Time (s): cpu = 00:00:09 ; elapsed = 00:00:09 . Memory (MB): peak = 2655.133 ; gain = 0.000 ; free physical = 3934 ; free virtual = 8571INFO: [Hsi 55-2053] elapsed time for repository (/home/dvdk/vivado/Vivado/2021.2/data/embeddedsw) loading 1 secondsDONE!INFO: [Common 17-206] Exiting Vivado at Fri Jan 26 14:47:31 2024...dvdk@vagrant:~/petalinux/vivado$ ls -la vivado/bora.cache/ bora.hw/ bora.ip_user_files/ bora.runs/ bora.srcs/ bora.xpr bora.xsa .gitignoredvdk@vagrant:~/petalinux/vivado$</pre> === Install Petalinux === {{ImportantMessage|text=Even if you can build your image with Petalinux in MVM, this required large amount of resources, so we not suggest you to use a MVM but a build server}} For install Petalinux, please follow the steps here below * Download <code>petalinux-v2021.2-final-installer.run</code> from [https://www.xilinx.com/support/download.html official Xilinx download page] and move it in MVM. In this case we create <code>Xilinx-2021.2</code> directory and inside we put installation file. Version used in <code>DESK-XZ7-L-1.0.1</code> is <code>Petalinux 2021.2</code> * Change permission of file, in order to be perform by user <pre class="workstation-terminal">dvdk@vagrant:~$ chmod u+x Xilinx-2021.2/petalinux-v2021.2-final-installer.run</pre> * Create Petalinux directory <pre class="workstation-terminal">dvdk@vagrant:~$ mkdir Petalinuxdvdk@vagrant:~$ cd Petalinux</pre> * Perform <code>petalinux-v2021.2-final-installer.run</code> file <pre class="workstation-terminal">dvdk@vagrant:~/Petalinux$ ../Xilinx-2021.2/petalinux-v2021.2-final-installer.run INFO: Checking installation environment requirements...WARNING: This is not a supported OSINFO: Checking free disk spaceINFO: Checking installed toolsINFO: Checking installed development librariesINFO: Checking network and other servicesINFO: Checking installer checksum...INFO: Extracting PetaLinux installer... LICENSE AGREEMENTS PetaLinux SDK contains software from a number of sources. Please reviewthe following licenses and indicate your acceptance of each to continue. You do not have to accept the licenses, however if you do not then you may not use PetaLinux SDK. Use PgUp/PgDn to navigate the license viewer, and press 'q' to close Press Enter to display the license agreementsDo you accept Xilinx End User License Agreement? [y/N] > yDo you accept Third Party End User License Agreement? [y/N] > yINFO: Installing PetaLinux...*********************************************WARNING: You haven't specified the installation location.******************************************************************************************WARNING: By default, it will be installed in your working directory: /home/dvdk/Petalinux*********************************************Please input "y" to proceed the installation, "n" to exit otherwise:y*********************************************WARNING: PetaLinux installation directory: /home/dvdk/Petalinux/. is not empty!*********************************************Please input "y" to continue to install PetaLinux in that directory?[n]yINFO: Checking PetaLinux installer integrity...INFO: Installing PetaLinux SDK to "/home/dvdk/Petalinux/."INFO: Installing buildtools in /home/dvdk/Petalinux/./components/yocto/buildtoolsINFO: Installing buildtools-extended in /home/dvdk/Petalinux/./components/yocto/buildtools_extendedINFO: PetaLinux SDK has been installed to /home/dvdk/Petalinux/.</pre> ==== Example of build <code>wic</code> image with Petalinux ==== Here below there is an example of build an <code>wic</code> image, with Petalinux. In this case we used the result of previous example with Vivado <pre class="mw-collapsible mw-collapsed workstation-terminal">dvdk@vagrant:~/petalinux$ source Petalinux/settings.sh PetaLinux environment set to '/home/dvdk/Petalinux'WARNING: /bin/sh is not bash! bash is PetaLinux recommended shell. Please set your default shell to bash.WARNING: This is not a supported OSINFO: Checking free disk spaceINFO: Checking installed toolsINFO: Checking installed development librariesINFO: Checking network and other servicesdvdk@vagrant:~/petalinux$ cp project-spec/configs/config_bora project-spec/configs/configdvdk@vagrant:~/petalinux$ petalinux-config --get-hw-description vivado/vivado/bora.xsa --silentconfig[INFO] Sourcing buildtoolsINFO: Getting hardware description...INFO: Renaming bora.xsa to system.xsa[INFO] Generating Kconfig for project[INFO] Silentconfig project[INFO] Extracting yocto SDK to components/yocto. This may take time![INFO] Sourcing build environment[INFO] Generating kconfig for Rootfs[INFO] Silentconfig rootfs[INFO] Generating plnxtool conf[INFO] Adding user layers[INFO] Generating workspace directorydvdk@vagrant:~/petalinux$ petalinux-build[INFO] Sourcing buildtools[INFO] Building project[INFO] Sourcing build environment[INFO] Generating workspace directoryINFO: bitbake petalinux-image-minimalNOTE: Started PRServer with DBfile: /home/dvdk/petalinux/build/cache/prserv.sqlite3, IP: 127.0.0.1, PORT: 37455, PID: 10346Loading cache: 100% |#########################################################################################################################################################| Time: 0:00:00Loaded 128 entries from dependency cache.Parsing recipes: 100% |#######################################################################################################################################################| Time: 0:06:45Parsing of 3495 .bb files complete (84 cached, 3411 parsed). 5156 targets, 268 skipped, 0 masked, 0 errors.NOTE: Resolving any missing task queue dependenciesNOTE: Fetching uninative binary shim file:///home/dvdk/petalinux/components/yocto/downloads/uninative/5ec5a9276046e7eceeac749a18b175667384e1f445cd4526300a41404d985a5b/x86_64-nativesdk-libc.tar.xz;sha256sum=5ec5a9276046e7eceeac749a18b175667384e1f445cd4526300a41404d985a5b (will check PREMIRRORS first)Initialising tasks: 100% |####################################################################################################################################################| Time: 0:00:21Checking sstate mirror object availability: 100% |############################################################################################################################| Time: 0:02:55Sstate summary: Wanted 3053 Found 2247 Missed 806 Current 0 (73% match, 0% complete)NOTE: Executing TasksWARNING: fetchmail-6.4.4-r0 do_fetch: Failed to fetch URL https://downloads.sourceforge.net/fetchmail/fetchmail-6.4.4.tar.xz, attempting MIRRORS if availableWARNING: fb-test-1.1.0-r0 do_fetch: Failed to fetch URL git://github.com/prpplague/fb-test-app.git, attempting MIRRORS if availableWARNING: stressapptest-1.0.9-r0 do_fetch: Failed to fetch URL git://github.com/stressapptest/stressapptest, attempting MIRRORS if availableNOTE: Tasks Summary: Attempted 8596 tasks of which 3438 didn't need to be rerun and all succeeded. Summary: There were 3 WARNING messages shown.INFO: Successfully copied built images to tftp dir: /tftpboot[INFO] Successfully built projectdvdk@vagrant:~/petalinux$ petalinux-package --boot --u-boot --force[INFO] Sourcing buildtoolsINFO: Getting system flash information...INFO: File in BOOT BIN: "/home/dvdk/petalinux/images/linux/zynq_fsbl.elf"INFO: File in BOOT BIN: "/home/dvdk/petalinux/project-spec/hw-description/bora.bit"INFO: File in BOOT BIN: "/home/dvdk/petalinux/images/linux/u-boot.elf"INFO: File in BOOT BIN: "/home/dvdk/petalinux/images/linux/system.dtb"INFO: Generating zynq binary package BOOT.BIN...  ****** Xilinx Bootgen v2021.2 **** Build date : Sep 30 2021-06:08:18 ** Copyright 1986-2021 Xilinx, Inc. All Rights Reserved.  [INFO] : Bootimage generated successfully INFO: Binary is ready.dvdk@vagrant:~/petalinux$ petalinux-package --wic --bootfiles "BOOT.BIN boot.scr image.ub"INFO: Sourcing build environmentINFO: Extracting rootfs, This may take time!INFO: Creating wic image...INFO: wic create /home/dvdk/petalinux/build/rootfs.wks --rootfs-dir /home/dvdk/petalinux/build/wic/rootfs --bootimg-dir /home/dvdk/petalinux/images/linux/ --kernel-dir /home/dvdk/petalinux/images/linux/ --outdir /tmp/tmp.SA1rPLWljr -n /home/dvdk/petalinux/build/tmp/work/cortexa9t2hf-neon-xilinx-linux-gnueabi/wic-tools/1.0-r0/recipe-sysroot-nativeINFO: Creating image(s)... WARNING: bootloader config not specified, using defaults INFO: The new image(s) can be found here: /tmp/tmp.SA1rPLWljr/rootfs-202401291016-mmcblk0.direct The following build artifacts were used to create the image(s): ROOTFS_DIR: /home/dvdk/petalinux/build/wic/rootfs BOOTIMG_DIR: /home/dvdk/petalinux/images/linux/ KERNEL_DIR: /home/dvdk/petalinux/images/linux/ NATIVE_SYSROOT: /home/dvdk/petalinux/build/tmp/work/cortexa9t2hf-neon-xilinx-linux-gnueabi/wic-tools/1.0-r0/recipe-sysroot-native INFO: The image(s) were created using OE kickstart file: /home/dvdk/petalinux/build/rootfs.wksdvdk@vagrant:~/petalinux$ cd images/linux/dvdk@vagrant:~/petalinux/images/linux$ ls -latotal 2997788drwxrwxr-x 3 dvdk dvdk 4096 Jan 29 11:16 .drwxrwxr-x 3 dvdk dvdk 4096 Jan 26 15:53 ..-rw-rw-r-- 1 dvdk dvdk 5101800 Jan 29 11:15 BOOT.BIN-rw-rw-r-- 1 dvdk dvdk 254 Jan 29 11:15 bootgen.bif-rw-r--r-- 1 dvdk dvdk 2709 Jan 26 19:15 boot.scr-rw-r--r-- 1 dvdk dvdk 8216 Jan 26 15:12 config-rw-r--r-- 1 dvdk dvdk 4868616 Jan 26 19:14 image.ub-rw-r--r-- 1 dvdk dvdk 6442455040 Jan 29 11:16 petalinux-sdimage.wicdrwxr-xr-x 2 dvdk dvdk 4096 Jan 26 19:15 pxelinux.cfg-rw-r--r-- 1 dvdk dvdk 558668800 Jan 26 19:35 rootfs.cpio-rw-r--r-- 1 dvdk dvdk 224547582 Jan 26 19:35 rootfs.cpio.gz-rw-r--r-- 1 dvdk dvdk 224547646 Jan 26 19:35 rootfs.cpio.gz.u-boot-rw-r--r-- 1 dvdk dvdk 799854592 Jan 26 19:35 rootfs.ext4-rw-r--r-- 1 dvdk dvdk 287571968 Jan 26 19:35 rootfs.jffs2-rw-r--r-- 1 dvdk dvdk 61379 Jan 26 19:32 rootfs.manifest-rw-r--r-- 1 dvdk dvdk 226472880 Jan 26 19:35 rootfs.tar.gz-rw-r--r-- 1 dvdk dvdk 4045672 Jan 26 15:12 system.bit-rw-r--r-- 1 dvdk dvdk 20776 Jan 26 15:53 system.dtb-rwxr-xr-x 1 dvdk dvdk 931196 Jan 26 18:19 u-boot.bin-rw-r--r-- 1 dvdk dvdk 951972 Jan 26 18:19 u-boot-dtb.bin-rw-r--r-- 1 dvdk dvdk 1017932 Jan 26 18:19 u-boot-dtb.elf-rwxr-xr-x 1 dvdk dvdk 7441276 Jan 26 18:19 u-boot.elf-rw-r--r-- 1 dvdk dvdk 4846008 Jan 26 19:14 uImage-rw-r--r-- 1 dvdk dvdk 14418152 Jan 26 19:14 vmlinux-rw-r--r-- 1 dvdk dvdk 4845944 Jan 26 19:14 zImage-rw-r--r-- 1 dvdk dvdk 510880 Jan 26 19:16 zynq_fsbl.elfdvdk@vagrant:~/petalinux/images/linux$</pre>  <section end="Body" />[[Category:BORA]] [[Category:BORA Xpress]] [[Category:BORA Lite]]