DESK-MX6-L/Development/How to create a bootable microSD card

Work in progress

History
Version	Issue Date	Notes
1.0.0	Oct 2020	First DESK release

How to create a bootable SD card

The procedure described here was tested with a physical machine. In case of a virtual machine such as the MVM, it might not work properly. Also, it is worth remembering that USB controller of the MVM is disabled by default. See also this section.

This article shows how to create a bootable microSD for the [[DESK-MX6-L/General/Release_Notes_(DESK-MX6-L)|DESK-MX6-L Release Notes] kit by using a simple bash script.
Note: Starting from this release the support for the SPL has been introduced in Uboot. Previous versions of this script will no longer produce a fully functional and bootable microSD card.

The procedure has been tested on a Linux PC running Ubuntu LTS (>=TBD) distribution with

• a 16 GB microSD card [1]
• the binary files delivered along with the DESKMX6-L 1.x.x.

The resulting card is partitioned as depicted here.

The script - named mksd.sh - looks like this:

#!/bin/bash

if [[ -z $1 || -z $2 || -z $3 || -z $4 || -z $5 ]]
then
	echo "$0 Usage:"
	echo "	$0 <device> <u-boot.img> <SPL> <binaries directory> <rootfs tar.bz2>"
	echo "	Example: $0 /dev/sdc u-boot.img SPL binaries/ rootfs.tar.bz2"
	exit
fi

if [ "$(whoami)" != "root" ]
then
	echo "you must be root to run this script!"
	exit
fi

if ! [[ -b $1 ]]
then
	echo "$1 is not a valid block device!"
	exit
fi

if ! [[ -e $2 ]]
then
	echo "Incorrect u-boot.img location!"
	exit
fi

if ! [[ -e $3 ]]
then
	echo "Incorrect SPL location!"
	exit
fi

if ! [[ -d $4 ]]
then
	echo "Incorrect Binaries location!"
	exit
fi

if ! [[ -f $5 ]]
then
	echo "Incorrect rootfs location!"
	exit
fi

DRIVE=$1
if [[ "$DRIVE" == *"mmcblk"* ]]
then
	echo "You're using a mmc device, I need to fix partition names"
	PART="p"
else
	PART=""
fi
UBOOT=$2
SPL=$3
BINARIES=$4
RFS=$5

echo "All data on "$DRIVE" now will be destroyed! Continue? [y/n]"
read ans
if ! [ $ans == 'y' ]
then
	exit
fi

echo "[Partitioning $1...]"

dd if=/dev/zero of=$DRIVE bs=1024 count=1024

SIZE=`fdisk -l $DRIVE | grep Disk | awk '{print $5}'`

echo DISK SIZE - $SIZE bytes

CYLINDERS=`echo $SIZE/255/63/512 | bc`

# check if we're running an old (e.g. 2.20.x) or new (e.g. 2.24.x) sfdisk
sfdisk --help | grep -- -H

if [ "$?" -eq "0" ]
then
	{
		echo 10,1380,0x0c,*
		echo 1390,,83,-
	} | sfdisk -D -H 255 -S 63 -C $CYLINDERS $DRIVE
else
{
    echo 10,4086M,0x0c,*
    echo 4096M,,83,-
} | sfdisk $DRIVE
fi

partprobe


echo "[Making filesystems...]"
mkfs.vfat -F 32 -n BOOT "$DRIVE$PART"1 #> /dev/null
mkfs.ext3 -L ROOTFS "$DRIVE$PART"2 #> /dev/null

echo "[Copying files...]"

binaries_dir=${BINARIES%/}
mount "$DRIVE$PART"1 /mnt
cp -av --no-preserve=ownership $binaries_dir/* /mnt/
umount "$DRIVE$PART"1

echo "[Extracting rfs (this may take a while...)]"
mount "$DRIVE$PART"2 /mnt
tar jxf $RFS -C /mnt > /dev/null
chmod 755 /mnt
umount "$DRIVE$PART"2

echo "[Programming SPL]"
dd if=$SPL of=$DRIVE bs=512 seek=2 conv=fsync

echo "[Programming u-boot.img]"
dd if=$UBOOT of=$DRIVE bs=1k seek=69 conv=fsync

echo "[Done]"

Here is an example that shows how to use this script. Let's assume that the binary files were downloaded in the desk subdirectory of the working directory. Before invoking the script, the following files has to be renamed in order to make them compatible with the default U-Boot environment variables:

• bootscript: boot.scr
• Linux kernel: uImage
• Device tree blob: imx6q-xelk-l-2-0-0.dtb.

This is the list of the binary files that will be used by the script:

dvdk@vagrant:~/desk-mx-l$ ls -la desk
total 7548
drwxrwxr-x 2 dvdk dvdk    4096 Oct  9 16:22 .
drwxrwxr-x 6 dvdk dvdk    4096 Oct  9 16:22 ..
-rw-r--r-- 1 dvdk dvdk   53760 Oct  9 16:22 imx6q-sbcx-cb0012.dtb
-rw-r--r-- 1 dvdk dvdk   56320 Oct  9 16:22 SPL
-rw-r--r-- 1 dvdk dvdk  569864 Oct  9 16:22 u-boot.img
-rw-r--r-- 1 dvdk dvdk 7031520 Oct  9 16:22 uImage
dvdk@vagrant:~/desk-mx-l$ 

You can now run the script, by passing the following parameters:

• Device file of the microSD card (/dev/sdc in the example)
• U-Boot image
• SPL
• Path of the directory containing the bootscript file, the Linux kernel image, and the device tree blob files
• Archive of the target's root file system (compressed as .tar.bz2 file).

dvdk@vagrant:~/desk-mx-l$ ./mksd.sh /dev/sd<x> <u-boot.img> <SPL> desk/ <rfs_filename>
...
...
TBD 
...
...

[1] In case you have a different size, you'll need to change the sfdisk parameters accordingly.

---