Bureaucrats, dave_user, Administrators
8,226
edits
Changes
no edit summary
This article describes how two build this project. Two procedures are described, the former is command line based while the latter is GUI based.
The project is stored is a git repository, as described [[Build_system_(BORA_SOM/BELK)-L/Development/Build_system#Setting_up_the_Zynq_development_server_environment|here]].
It is assumed that the Zynq development environment has been set up properly (see [[Build_system_(BORA_SOM/BELK)-L/Development/Build_system|this page]] for more details).
===Command line based procedure===
**Copy the <code>ps7_init_gpl.c</code> and <code>ps7_init_gpl.h</code> source files into U-boot source code directory using the following command example for Bora:
:<code>cp <bora_repo>/bd/${BASE_NAME}/ip/${BASE_NAME}_processing_system7_0_0/ps7_init_gpl.* <U-boot_src_dir>/board/dave/bora/${UBOOT_PS7_DIR}/</code>
:*Follow [[BORA_SOM/BELK-L/Development/Building_U-Boot_(BELK/BXELK) Boot | U-boot build instructions]] to build U-boot using new PS configurations. '''Please note that the U-Boot binary images released along with BELK/BXELK were already built upon the <code>ps7_init_gpl.c</code> and <code>ps7_init_gpl.h</code> source files generated by the Vivado project described in this article'''. As such, it is not generally required to rebuild U-Boot.
:**The PS configurations are the same for Bora and BoraLite boards.
*The bitstream file is now present in <code><project_directory>/<prj_name>.runs/impl_1/${BASE_NAME}_wrapper.bit</code> and <code><project_directory>/<prj_name>.runs/impl_1/${BASE_NAME}_wrapper.bin</code>.
*Copy the <code>ps7_init_gpl.c</code> and <code>ps7_init_gpl.h</code> source files into U-boot source code directory using the following command example for Bora:
:<code>cp <project_directory>/<prj_name>.srcs/sources_1/bd/${BASE_NAME}/ip/<prj_name>_processing_system7_0_0/ps7_init_gpl.* <U-boot_src_dir>/board/dave/bora/${UBOOT_PS7_DIR}/</code>Follow [[BORA_SOM/BELK-L/Development/Building_U-Boot_(BELK/BXELK) Boot | U-boot build instructions]] to build U-boot using new PS configurations. '''Please note that the U-Boot binary images released along with BELK/BXELK were already built upon the <code>ps7_init_gpl.c</code> and <code>ps7_init_gpl.h</code> source files generated by the Vivado project described in this article'''. As such, it is not generally required to rebuild U-Boot.
-----
{{notelist}}