Connectors, buttons and switches (SBC Lynx)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
 SBC Lynx is extremely flexible in terms of hardware configurations. This document details connector's pinout of common SBC Lynx models. For more information about models not documented here, please contact Sales department. |
Introduction[edit | edit source]
This document details connectors, pinouts and switches that equip SBC Lynx board. Please note that not all of them are available on all models.
The following table lists connectors and switches available on SBC Lynx.
| Reference | Function | Type | Part number | Notes | |||||
|---|---|---|---|---|---|---|---|---|---|
| J35 | Power supply | 2-pin header, male pins, Shrouded 0.200in pitch | Phoenix 1757242 MSTBA 2.5/2-G-5.08 | [1] | |||||
| JP1 | Power supply | 2.1mm ID, 5.5mm OD | CUI PJ-002A | [1] | |||||
| J42 | System console | TTL 3.3V UART | 4-pin Header, Male 0.100in pitch | ||||||
| J50 | System ONOFF / Power Reset | 4-pin Header, Male 0.100in pitch | |||||||
| J16 | 10/100 Base-T Ethernet port | RJ-45 | Wurth 74990112116A | ||||||
| J43 | microSD slot | push-pull slot | Molex 47571-0001 | ||||||
| J47 | USB OTG | USB type micro AB | Hirose ZX62D-AB-5P8 | J55 | USB OTG | USB type micro B vertical | Molex 105133-0011 | ||
| J48 | USB host | USB type A Right Angle | Wurth WE-614 004 134 726 |
[1] These parts are mutually exclusive.
