Changes

Connectors, buttons and switches (SBC Lynx)

47 bytes removed, 10:15, 18 November 2016

→‎DWM WiFi/Bluetooth module Connector (J46)

J46 is a 30-pins SlimStack™ Receptacle 0.50mm pitch that allows to connect to DAVE Embedded Systems' DWM Wifi/BT module.

The following table reports the connector's pinout:

{|class="wikitable" style="text-align: center;"

|-

| 1,2||-||PMIC_5V||5V DWM Module Power Supply|| || ||Up to 500mA shared with USB Host / OTG Mezzanine Board Connector

|-

| 3,4||-||3V3_IO||DWM Level Shifter Power Supply|| || ||-

|-

| 5, 6, 9, 10, 19||-||DGND||Ground|| || ||-

|-

| 12, 14, 16, 18, 20, 22||-||NC||-|| || ||-

|-

| 7||F3||WIFI_CMD||WIFI_CMD / uSDHC2_CMD|| || ||-

|-

| 8||F2||WIFI_CLK||WIFI_CLK / uSDHC2_CLK|| || ||-

|-

| 11||E4||WIFI_DATA0||WIFI_DATA0 / uSDHC2_DATA0|| || ||-

|-

| 13||E3||WIFI_DATA1||WIFI_DATA1 / uSDHC2_DATA1|| || ||-

|-

| 15||E2||WIFI_DATA2||WIFI_DATA2 / uSDHC2_DATA2|| || ||-

|-

| 17||E1||WIFI_DATA3||WIFI_DATA3 / uSDHC2_DATA3|| || ||-

|-

| 21||J16||BT_UART_RX||BT_UART_RX / UART2_RX_DATA|| || ||-

|-

| 23||H14||BT_UART_CTS||BT_UART_CTS / UART2_nRTS|| || ||-

|-

| 24||R9||TIWI_BT_F5||TIWI_BT_F5 / DWM_BT_F5|| || ||-

|-

| 25||J17||BT_UART_TX||BT_UART_TX / UART2_TX_DATA|| || ||-

|-

| 26||R10||TIWI_BT_F2||TIWI_BT_F2 / DWM_BT_F2|| || ||-

|-

| 27||J15||BT_UART_RTS||BT_UART_RTS / UART2_nCTS|| || ||-

|-

| 28||P10||TIWI_IRQ||TIWI_IRQ / 3V3_WLAN_IRQ|| || ||-

|-

| 29||N10||TIWI_BT_EN||TIWI_BT_EN / 3V3_BT_EN|| || ||Internally used for CB_Configid

|-

| 30||P9||TIWI_EN||TIWI_EN / 3V3_WLAN_EN|| || ||-

|-

|}

===Multiprotocol UARTs and CAN interfaces===

There are two UART multiprotocol ports (RS232 / RS485 / RS422) and one CAN interface available on SBC LYNX.

U0001

Bureaucrats, dave_user, Administrators

4,650

edits

DAVE Developer's Wiki β

Changes

Connectors, buttons and switches (SBC Lynx)

DAVE Developer's Wiki ^β