3,260
edits
Changes
BELK 2.1.0 released
|Released
|Released
|Work In ProgressReleased
|Planned
|-
|November 2013
|May 2014
|July August 2014
|4Q 2014
|-
|[[Bora_Embedded_Linux_Kit_(BELK)#BELK 1.1.0 | Ver 1.1.0]]
|[[Bora_Embedded_Linux_Kit_(BELK)#BELK 2.0.0 | Ver 2.0.0]]
| -[[Bora_Embedded_Linux_Kit_(BELK)#BELK 2.1.0 | Ver 2.1.0]]
| -
|-
|valign="top" | -
|valign="top" | Yocto Daisy (1.6)
|valign="top" | Yocto (1.x.y)
|-
|}
=== Release notes ===
==== BELK 2.1.0 ====
Updates:
# Fix and performance improvement on u-boot network interface
# Fix SD card hotplug issue in Linux
# First Yocto Daisy (1.6) BSP Release
===== Known Limitations =====
{| class="wikitable"
|-
!Issue
!Description
|-
| ETH0 interface
| Primary Gigabit Ethernet Interface (ETH0) is not working correctly at 10Mbps
|-
| Kernel command line
| User should remove '''mem=xxx''' from kernel command line to avoid system hang during boot
|-
| Yocto ubi-utils command line
| Some Yocto ubi-utils command line are in non standard format. For ''ubimkvol'' and ''ubirmvol'' the UBI device must be the last argument (e.g. ubimkvol -m -N belk /dev/ubi0)
|-
|External DDR3 bank
|The DDR3 SDRAM bank on the BoraEVB is not supported in this BELK version.
|-
|ETH1 interface
|The additional Gigabit Ethernet interface (ETH1) is not supported in this BELK version.
|-
|RTC
|Date/time retention is limited to about 4 hours.
|-
|}
==== BELK 2.0.0 ====