Bureaucrats, dave_user, Administrators
8,204
edits
Changes
no edit summary
{{Applies To Bora}}
{{InfoBoxBottom}}
{{ObsoleteWikiPage|link=DESK-XZ7-L}}
{{ImportantMessage|text='''For BELK 3.0.2 or older, the boot process was based on the FSBL+second-stage bootloader (U-Boot) combination. From BELK 4.0.0 on, the boot process is based on the first-stage bootloader (U-Boot SPL)+second-stage bootloader (U-Boot) combination.'''
}}
<section begin="Unboxing" />==IntroductionUnboxing==
[[File:Belk_01.png|500px]]
'''DAVE Embedded Systems''' provides all the customization required (in particular at bootloader and Linux kernel levels) to enable customers to use the standard Zynq-7000 development tools for building all the firmware/software components that will run on the target system.
<section end="Unboxing" />
<section begin="Kit Content" />==Kit contentcontents==
{| class="wikitable" style="margin: auto;"
|-
!Component
!Notes
|-
|style="text-align: center;" | [[File:Bora5-small.jpg|60px]]|[[:Category:Bora|BORABora]] SOM<br>CPU Default option is DBRF4110S2R (see [[#Order codes|Order codes]] for more options)*SoC: Xilinx Zynx 7000XC7Z020 (866Mhz, Speed "-3", Tj 0-100°C)*SDRAM: 1 GB DDR3*NOR: bootable SPI flash 16 MB*NAND: 1GB (SLC)|Please * For more details, please refer to the[[Hardware Manual (Bora) | Bora Hardware Manual]]* By default, ARM cores frequency is set to 667 MHz and the [[Creating and building example Vivado project (BELK/BXELK)|example Vivado project]] is implemented for a "-1" device. This choice makes the software released with the kit compatible with possible variants based on different SoM models. In this regard, see also the [[#Order codes|order codes section]].
|-
|style="text-align: center;" | [[File:Boraevb-02.png|80px]]
|BORA Carrier board
|Please refer to Se also the[[BoraEVB | BoraEVB]] page
|-
|style="text-align: center;" | [[File:Alimentatore.jpg|40px]]
|AC/DC Single Output Wall Mount adapter<br>Output: +12V – 2.0 A
|Please refer to Belk Quick Start Guide
|-
|style="text[[File:FTDI-CHIPI-alignX10.png|60px|center]]|FTDI USB/RS232 cable adapter<br>|FTDI code: [https: center;" //ftdichip.com/products/chipi-x10/ CHIPI-X10]|-| [[File:ProdSDCEVK-kit-DB9-serial-MBLYcable.png.png|60px|center]]| D9 Female to D9 Female null modem cable||-thumb| [[File:Sandisk_Industrial_32GB.png|50px60px|center]]|MicroSDHC card with SD adapter and USB adapter|Please refer |-|} ===Order codes==={| class="wikitable" style="margin: auto;"|+!Order code!Description|-|BELK-L-S-S|This code refers to Belk Quick Start Guidethe default configuration detailed above
|-
|}
<section end="Kit Content" />
==Logical structure of Bora Embedded Linux Kit (BELK)==
* [[BoraEVB | BORAEVB]]
* [[BELK/BXELK Quick Start Guide]]
* [[FAQs_(Bora) | BORA FAQs]]