{{ImportantMessage|text=SBC Diva is extremely flexible in terms of hardware configurations. This document describes main options related to booting. In case you need a configuration that is not listed here, please contact [mailto:sales@dave.eu Sales department].}}
==Introduction==
==Available options==
Boot modes can be selected by S3 switches which acts directly on SYSBOOT configuration pins. S3 switch switches are mapped to SYBOOT[3:0] pins allowing different boot modes. {|class="wikitable" style="text-align: center;"|-!S3 switch!SYBOOT pin|-| S3.1 || SYSBOOT3|-| S3.2 || SYSBOOT2|-| S3.3 || SYSBOOT1|-| S3.4 || SYSBOOT0|}
Same example can be found in the following table:
!Notes
|-
| 0111|| MMC0/SPI0/UART0 ||'''Default'''boot from NOR SPI|-| 0011|| NAND/NANDI2C/MMC0||boot from NAND|-| 1001|| SPI0/MMC0/EMAC1||boot from EMAC if DIVA has no NOR and no NAND on board