Changes

 The following sections provide information about the Reference software components is delivered as part of the BELK kit. The reference BELK version is 3.0.0. === Introduction to the development environment === Please refer to {{OldRevision | page=Introduction_to_developing_environment_[[BoraX_Embedded_Linux_Kit_(BELKBXELK) | revision=4000 | text=this page}} for more details. === Build system === Please refer to {{OldRevision | page=Build_system_BoraX Embedded Linux Kit (BELKBXELK) | revision=4077 | text=this page}} for more details]]. === Creating and building an example Vivado project === Please refer to {{OldRevision | page=Creating_and_building_example_Vivado_project_(BELK) | revision=4196 | text=this page}} for more details. === Building U-Boot === Please refer to {{OldRevision | page=Building_U-Boot_(BELK) | revision=4093 | text=this page}} for more details. === Building Linux === Please refer to {{OldRevision [[BXELK_software_components| This page=Building_Linux_kernel_(BELK) | revision=4094 | text=this page}} for more ]] details. === Building how the software components via Yocto === Please refer to {{OldRevision | page=Building_the_software_components_via_Yocto_(BELK) | revision=4176 | text=this page}} for more detailsis organized. === Booting the system via NFS === Please refer to {{OldRevision | page=Booting_the_system_via_NFS_However, reading of [[Host_setup_and_development_flow_(BELKBXELK) | revision=4159 | text=this page}} for more details. === System boot and recovery via microSD card === Please refer document]] is recommended to {{OldRevision | page=System_boot_and_recovery_via_microSD_card_(BELK) | revision=4163 | text=this page}} for more details. === ConfigID management === Please refer to {{OldRevision | page=ConfigID_management_(BELK) | revision=4175 | text=this page}} for more detailshave a complete overview of the kit's organization.