Difference between revisions of "AXEL ULite SOM/AXEL ULite Evaluation Kit/Interfaces and Connectors/Power Supply"
(→Signals) |
|||
| Line 36: | Line 36: | ||
! latexfontsize="scriptsize"| Pin Notes | ! latexfontsize="scriptsize"| Pin Notes | ||
|- | |- | ||
| − | | 1 || DGND || Ground | + | | J16.1 || DGND || Ground |
|- | |- | ||
| − | | 2 || VIN || +[12-24 V] | + | | J16.2 || VIN || +[12-24 V] |
|} | |} | ||
Revision as of 13:12, 19 July 2021
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Jul 2021 | First DESK release | |
Power Supply interface[edit | edit source]
Description[edit | edit source]
Power is provided through the J16 connector. Power voltage range is +[12-24 V].
J16 is a two pins 2x3.5mm 691321100002 Wurth connector.
Signals[edit | edit source]
The following table describes the interface signals:
| Pin# | Pin function | Pin Notes |
|---|---|---|
| J16.1 | DGND | Ground |
| J16.2 | VIN | +[12-24 V] |
Power LED[edit | edit source]
DL3 is a green LED (placed near J16) shows the status of the power input. This LED is ON when a valid power supply is present.
