Open main menu

DAVE Developer's Wiki β

AXEL Lite SOM/AXEL Lite Hardware/General Information/Processor and memory subsystem

< AXEL Lite SOM‎ | AXEL Lite Hardware
Revision as of 13:03, 23 October 2020 by U0007 (talk | contribs) (NOR flash bank)

History
Version Issue Date Notes
1.0.0 Sep 2020 New layout documentation


Contents

Processor and memory subsystemEdit

The heart of AXEL Lite module is composed by the following components:

  • i.MX6 SoC application processor
  • Power supply unit
  • DDR memory banks
  • NOR and NAND flash banks
  • SO-DIM 204 pin connector with interfaces signals

This chapter shortly describes the main Axel Lite components.

Processor InfoEdit

Processor # Cores Clock L2 Cache DDR3 Graphics Acceleration IPU VPU SATA-II
i.MX6 Solo 1 800 MHz
1 GHz
512 KB 32 bit @ 400 MHz 3D: Vivante GC880
2D: Vivante GC320
Vector: N.A.
1x 1x No
i.MX6 DualLite 2 850 MHz
1 GHz
512 KB 64 bit @ 533 MHz 3D: Vivante GC880
2D: Vivante GC320
1x 1x No
i.MX6 Dual 2 850 MHz
1 GHz
1.2 GHz
1 MB 64 bit @ 533 MHz 3D: Vivante GC2000
2D: Vivante GC320
Vector: Vivante GC335
2x 2x Yes
i.MX6 Quad 4 850 MHz
1 GHz
1.2 GHz
1 MB 64 bit @ 533 MHz 3D: Vivante GC2000
2D: Vivante GC320
Vector: Vivante GC335
2x 2x Yes
Table: i.MX6 models comparison

RAM memory bankEdit

DDR3 SDRAM memory bank is composed by 4x 16-bit width chips resulting in a 64-bit combined width bank. The following table reports the SDRAM specifications:

CPU connection Multi-mode DDR controller (MMDC)
Size min 512 MB
Size max 4 GB
Width 64 bit
Speed 533 MHz

NOR flash bankEdit

NOR flash is a Serial Peripheral Interface (SPI) device. This device is connected to the eCSPI channel 1 and by default it acts as boot memory. The following table reports the NOR flash specifications:

CPU connection eCSPI channel 1
Size min 8 MB
Size max 64 MB
Chip select ECSPI1_SS0
Bootable Yes

NAND flash bankEdit

On board main storage memory is a 8-bit wide NAND flash connected to the CPU's Raw NAND flash controller. Optionally, it can act as boot peripheral. The following table reports the NAND flash specifications:

CPU connection Raw NAND flash controller
Page size 512 byte, 2 kbyte or 4 kbyte
Size min 128 MB
Size max 2 GB
Width 8 bit
Chip select NANDF_CS0
Bootable Yes

Memory mapEdit

For detailed information, please refer to chapter 2 “Memory Maps” of the i.MX Applications Processor Reference Manual.

Power supply unitEdit

AXEL Lite embeds all the elements required for powering the unit, therefore power sequencing is self-contained and simplified. Nevertheless, power must be provided from carrier board, and therefore users should be aware of the ranges power supply can assume as well as all other parameters.