Difference between revisions of "AXEL Lite SOM/AXEL Lite Evaluation Kit/Interfaces and Connectors/Power Supply"
(→Description) |
(→Description) |
||
| Line 22: | Line 22: | ||
J2 is a two pins MSTBA 2.5/2-G-5.08 Phoenix connector. | J2 is a two pins MSTBA 2.5/2-G-5.08 Phoenix connector. | ||
| − | [[File:AXEL Lite-EVB-Power Supply- | + | [[File:AXEL Lite-EVB-Power Supply-connector1.png|thumb|center| 500px|Power Supply connector]] |
===Signals === | ===Signals === | ||
Revision as of 09:14, 28 October 2020
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Oct 2020 | First DESK release | |
Power Supply[edit | edit source]
Description[edit | edit source]
Power is provided through the J2 connector. Power voltage range is +[12-24 V].
J2 is a two pins MSTBA 2.5/2-G-5.08 Phoenix connector.
Signals[edit | edit source]
The following table describes the interface signals:
| Pin# | Pin function | Pin Notes |
|---|---|---|
| 1 | DGND | Ground |
| 2 | VIN | +[12-24 V] |
Power LED[edit | edit source]
DL1 is a green LED (placed near battery holder) shows the status of the power input. This LED is ON when a valid power supply is present.
