Difference between revisions of "AXEL Lite SOM/AXEL Lite Evaluation Kit/Interfaces and Connectors/CAN"
(→Signals) |
(→Description) |
||
| Line 21: | Line 21: | ||
J23 is a 3x2x2.54mm header that provides the CAN bus port compatible with the CAN 2.0B protocol. The CAN transceiver is implemented on the AXEL LITE SOM. | J23 is a 3x2x2.54mm header that provides the CAN bus port compatible with the CAN 2.0B protocol. The CAN transceiver is implemented on the AXEL LITE SOM. | ||
| + | |||
| + | |||
| + | [[File:AXEL Lite-EVB-CAN-connector.png|thumb|center| 500px|CAN connector]] | ||
===Signals === | ===Signals === | ||
Revision as of 09:43, 28 October 2020
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Oct 2020 | First DESK release | |
CAN[edit | edit source]
Description[edit | edit source]
The CAN interface available on the Evaluation Kit at the connector J23.
J23 is a 3x2x2.54mm header that provides the CAN bus port compatible with the CAN 2.0B protocol. The CAN transceiver is implemented on the AXEL LITE SOM.
Signals[edit | edit source]
The following table describes the interface signals:
| Pin# | SOM Pin# | Pin name | Pin function | Pin Notes |
|---|---|---|---|---|
| 1,2 | - | N.A. | N.C. | Bus termination |
| 3 | J10.44 | CAN_M | Low bus line | |
| 4 | J10.42 | CAN_P | High bus line | |
| 5 | - | CAN_SHIELD | Shield | |
| 6 | - | DGND | Ground |
Device mapping[edit | edit source]
CAN device is mapped to can0 device in Linux. The peripheral can be configured using ifconfig and ip link utilities.
Device usage[edit | edit source]
Inserting a jumper on pins 1 and 2 enables 120Ω bus termination.
