3,260
edits
Changes
Created page with "{{InfoBoxTop}} {{AppliesToNaon}} {{Applies To NaonEVB-Mid}} {{InfoBoxBottom}} Two JTAG interfaces are provided by NaonEVB-Mid carrier board (J7 and J9). J9 implements st..."
{{InfoBoxTop}}
{{AppliesToNaon}}
{{Applies To NaonEVB-Mid}}
{{InfoBoxBottom}}
Two JTAG interfaces are provided by [[NaonEVB-Mid]] carrier board (J7 and J9).
J9 implements standard 20-pin 2.54mm-pitch ARM JTAG port. J7 implements 20-pin 1.27mm-pitch Texas Instruments JTAG port (aka 20-pin compact TI connector). From the functional standpoint the two ports are interchangeable with the exception of trace signals EMU0/1/2/3/4 that are not available on J9.
Please note that freely available TI Code Composer Studio IDE (http://processors.wiki.ti.com/index.php/Code_Composer_Studio) supports these hardware interfaces: http://www.ti.com/tool/XDS100.
{{AppliesToNaon}}
{{Applies To NaonEVB-Mid}}
{{InfoBoxBottom}}
Two JTAG interfaces are provided by [[NaonEVB-Mid]] carrier board (J7 and J9).
J9 implements standard 20-pin 2.54mm-pitch ARM JTAG port. J7 implements 20-pin 1.27mm-pitch Texas Instruments JTAG port (aka 20-pin compact TI connector). From the functional standpoint the two ports are interchangeable with the exception of trace signals EMU0/1/2/3/4 that are not available on J9.
Please note that freely available TI Code Composer Studio IDE (http://processors.wiki.ti.com/index.php/Code_Composer_Studio) supports these hardware interfaces: http://www.ti.com/tool/XDS100.
